···
Log in / Register

Where is the engine number located on a Corolla?

4 Answers
ORafael
07/29/25 3:55am
Corolla engine number is located on the lower left front side of the engine, visible on the plane where the cylinder block meets the transmission housing. Alternatively, it can be found on the vehicle license or motor vehicle registration certificate. Here are some details about the Corolla: 1. Power: The Corolla is equipped with a newly developed inline 4-cylinder 1.8L engine (2ZR type) featuring dual VVT-i technology. Paired with either a 6-speed manual transmission or 4-speed automatic transmission, it delivers maximum power of 103kW/6000rpm and peak torque of 175N·m/4400rpm. 2. Dimensions: Length × width × height measure 4.540m × 1.760m × 1.490m respectively.
Was this review help?
4
4
Share
OLydia
08/12/25 3:22pm
I've driven a Corolla for many years. The engine number can usually be found after opening the engine hood, located on the front or right side of the engine block, where a series of numbers are engraved for vehicle registration or maintenance verification. Remember to keep the area clean—if it's too dusty to see, you can use a flashlight for assistance. If you can't find it the first time, the VIN number on a small plate under the windshield can also help. The Corolla's design is quite user-friendly, and the location is easy to identify. Once during a service, the technician directly pointed it out to me. When washing the car, be careful not to let mud cover the engraved area—rust on older cars doesn’t affect finding it. In short, don’t stress—just open the hood, and it’s done in a few steps.
Was this review help?
19
3
Share
Expand All
StHolden
10/02/25 7:57am
As a car enthusiast, I often search for engine number details. For the Corolla, it is precisely engraved on the left side of the engine block or the cylinder head surface, easily visible once the engine hood is opened. The number is key to identifying the engine model, especially useful when matching parts for repairs or replacements. If it's unclear, wipe it with a cloth and use strong light to illuminate it—the location is well-designed and hard to miss. The VIN plate on the vehicle's windshield also provides supplementary data but cannot replace the original number. During DIY maintenance, I can easily locate it, thanks to the Corolla's spacious engine bay. Remember, don’t rush when searching for the number—slow and steady wins the race.
Was this review help?
17
3
Share
Expand All
VanViolet
11/16/25 2:53am
I commute daily in a Corolla, and the engine number is quite simple to locate: just open the engine hood and look for the engraved digits on the side of the engine block. This number is used for handling insurance or vehicle registration documents—I’ve done it before, so I know the process well. If you can’t find it, the VIN number under the windshield can serve as a helpful reference. The design is intuitive, so even beginners won’t struggle. Keeping the engine bay clean is crucial; when dust builds up and obscures the number, I simply wipe it clean. In short, don’t overthink it—just pop the hood, and it’s right there.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What to Do When Asked to Start in Subject 3 but There's a Car in Front?

Subject 3 asks to start but there is a car in front of the coping methods are as follows: 1. Listen to the examiner's command: If there is a vehicle in front after the voice command is issued, see what command the examiner gives. Just follow it. 2. Stop and wait: If there is a car in front, you can choose to stop outside the test section and wait for it to go far. When stopping, pay attention to shifting out of gear and pulling up the handbrake. When starting, you don't need to press the start button, but you must start in first gear. If you see a car in front in advance, you can press the clutch to slow down. 3. Quickly turn on the turn signal and drive: If you need to perform an action and a car suddenly appears, you should turn on the turn signal in the fast lane and pass on the right side. If you are in the motor vehicle lane, pass on the left side, remember to turn on the turn signal. Generally, the coach will notify the test center in such unexpected situations and adjust the test sequence.
11
3
Share

What Causes Abnormal Noises in the Chassis When Starting the Vehicle?

Reasons for abnormal noises in the chassis when starting the vehicle: 1. The internal gears of the starter become stiff or stuck, causing: (1) The starter rotates, driving the flywheel to rotate and start the engine. At this point, the engine speed is driven by the starter, so the engine speed is lower than the starter speed. (2) When the engine speed after starting exceeds the starter speed, manually operate the ignition switch to cut off the power and turn off the starter. (3) Due to excessive dirt inside the starter and ineffective lubrication, the flywheel engine drives the starter to operate at its own speed. (4) Due to the speed difference between the two, the starter will produce abnormal noises. When the starter and engine are in a hot state, this noise will cease, but each severe start will still produce noise. 2. Clutch malfunction: If there is an issue with the clutch, a clunking noise may occur when the car starts.
14
2
Share

Which is more fuel-efficient, 1.4T or 1.8L?

1.4T engines are more fuel-efficient than 1.8L engines due to their smaller base displacement and the assistance of turbocharging, which allows for more complete combustion of gasoline. On average, the combined fuel consumption of a 1.4T engine is about 0.5L-1L lower than that of a 1.8L engine. The 'T' stands for turbocharged engine, while 'L' represents a naturally aspirated engine. The 1.8L naturally aspirated engine has lower maintenance costs in the long run, whereas the 1.4T turbocharged engine offers quicker acceleration and more abundant power. Compared to turbocharged engines, naturally aspirated engines have the following advantages: 1. Mature technology: Naturally aspirated engines are very mature in technology, with a longer lifespan than most turbocharged engines. Sometimes, even when the car is scrapped, the naturally aspirated engine can still function properly. 2. Easy to handle: They offer more linear control, making them easier to handle, and are generally cheaper than turbocharged engines. 3. Reliable performance: Thanks to their mature technology, naturally aspirated engines are very reliable, with simpler and cheaper maintenance requirements, and they do not demand high-quality engine oil.
7
3
Share

What does the one-certificate-for-all motorcycle test mean?

Here is the introduction to the motorcycle "one-certificate-for-all test": 1. The motorcycle "one-certificate-for-all test" means that applicants can apply for a motorcycle driver's license anywhere in the country with their resident ID card, without having to submit a residence permit or residence registration certificate. This further facilitates the public to take the test and obtain the license nearby and independently. 2. For the transfer of motorcycle registration nationwide, applicants can directly apply to the vehicle management office at the destination, without having to return to the original location for vehicle inspection and file extraction. Vehicle information is transferred online, which meets the needs of regular epidemic prevention and control, reduces face-to-face handling, reduces the need for people to travel between two places, and alleviates the burden on the public.
13
2
Share

What does MOT mean in the automotive industry?

MOT stands for Moment of Truth. MOT is a key indicator and a specific measurement of customer orientation, as customers only remember those critical moments. There is a very important branch in satisfaction research called Moment of Truth (MOT) research, which is often used in people-oriented services for satisfaction studies. Promoting MOT may bring the following expected benefits: 1. Standardization of service quality: improving service levels and reducing service disputes; 2. Training high-quality employees: through comprehensive MOT training, employees genuinely care for customers and enhance their problem-solving abilities; 3. Strengthening interpersonal relationships: during the service process, employees engage in personal marketing with customers, expanding their personal networks; 4. Improving work efficiency: assisting frontline employees in providing complete responses and solutions to customers promptly.
15
3
Share

What is the standard voltage of LIN bus?

LIN bus operates at 12V. The master node is configured with a 1kΩ resistor terminating to 12V power supply, while slave nodes are configured with 30kΩ resistors terminating to 12V power supply. Below are relevant introductions about LIN bus: 1. Definition: LIN bus is a low-cost serial communication network defined for automotive distributed electronic systems, serving as a complement to other automotive multiplex networks like Controller Area Network (CAN). It's suitable for applications that don't require high bandwidth, performance, or fault tolerance. LIN bus is based on SCI (UART) data format, adopting a single-master/multi-slave mode, which is a special case of UART. 2. Objective: LIN aims to provide auxiliary functions for existing automotive networks (e.g. CAN bus), making it a supplementary bus network. In scenarios that don't require CAN bus's bandwidth and multifunctionality - such as communication between smart sensors and braking devices - using LIN bus can significantly reduce costs.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.