Where is the engine number located on a Cadillac ATS?

3 Answers
SanEloise
07/29/25 5:54am
The engine number of a Cadillac ATS is located between the engine and the transmission, typically consisting of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle's driving license displays the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will specify the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and engine models can be the same. The engine number, however, refers to the production serial number of the engine. Each engine can only have one engine number, and every engine's number is unique.
Was this review help?
9
2
Share
VonXavier
08/12/25 8:33pm
I've been driving a Cadillac ATS for several years, and finding the engine number is quite straightforward. After opening the hood, the engine is right in front of you. The specific location is on the right front side of the engine block, where a serial number is stamped. If it's hard to see, you can use a flashlight or wipe off the dust, as these numbers might be covered by oil stains. You'll often need this number for vehicle registration or repairs, so it's best to note its location for future reference. I once forgot where to find it, and the mechanic laughed at me for being careless—since then, I've remembered to look for that small label area from the top of the engine. In short, checking it regularly is good for car maintenance, so you don't waste time searching for it in a hurry.
Was this review help?
12
4
Share
Expand All
StMiguel
10/03/25 8:06am
When I bought my used Cadillac ATS, I had to locate the engine number myself for the ownership transfer. It's located in the engine compartment, on the upper part of the engine near the fan, engraved on a metal plate. The spot isn't particularly hidden—you can spot it as soon as you pop the hood—but don't mix it up with the VIN. Since you'll need to photograph or jot it down for registration, I recommend cleaning any debris off the engine first. I snapped a photo with my phone and saved it, which made things much easier. Though it might sound technical, it's actually simple enough for anyone to handle—just remember to look near the main engine block.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What does 'Insufficient Cleaning Fluid, Please Add' mean?

It indicates that the windshield washer fluid has been depleted. Below is relevant information about windshield washer fluid: 1. Types of windshield washer fluid: Windshield washer fluid is a cleaning product that does not contain abrasive substances and can quickly remove dirt from glass, leaving it clear and bright. It is suitable for general automotive glass, as well as acrylic and plastic windows, such as windshields and sunroofs. Commonly known as 'glass water,' windshield washer fluid in China's automotive retail market can generally be divided into three types: one is the commonly used cleaning fluid in summer, another is the antifreeze type specifically for winter use, and the third is a special antifreeze type. 2. Transportation and storage: Handle with care during transportation to prevent collisions. The product should be stored in a cool, dry, and well-ventilated place.
18
5
Share

What are the effects of a faulty Buick camshaft solenoid valve?

Buick LaCrosse camshaft solenoid valve failure has the following effects: 1. Difficulty starting: When the camshaft solenoid valve fails, it cannot automatically open and close, leading to difficulties in starting the car. 2. Weak acceleration: A faulty camshaft solenoid valve may cause the oil drain hole to close, preventing effective fuel transfer and combustion, resulting in weak acceleration. 3. Engine stalling after starting: If the solenoid valve suddenly closes or fails to operate properly when the car starts, it can cause the engine to stall. 4. Illuminated malfunction indicator light: There are many reasons for the malfunction indicator light to come on, and a faulty camshaft solenoid valve is one of them. It can cause symptoms such as difficulty starting and weak acceleration.
5
2
Share

What Causes the Humming Sound in Audi A5?

Audi A5 may produce a humming sound due to damaged wheel bearings or loose screws. Below are the possible causes and solutions for the humming sound in Audi A5: Damaged Wheel Bearings: First, inspect the wheel bearings. To check, lift the car on a stand, put it in neutral, and release the handbrake. Then, quickly rotate each of the four tires by hand while placing your ear close to the tire to listen for any humming sound. If a humming sound is detected, the wheel bearing is damaged and needs to be replaced. Loose Screws: It could also be due to loose screws. It is recommended to check if the engine oil level is normal. The A5 is a high-quality car as it is an import, and most chassis noises are engine-related, likely due to low oil levels. Adding engine oil may resolve the issue.
15
4
Share

What is the normal RPM for a Corolla when the AC is on?

Corolla's normal RPM with AC on is 600-800. Car Idling: Idling is an operational state of a car where the engine runs in neutral gear. The engine speed during idling is called idle speed, which can be adjusted by modifying the throttle opening size. Idling means the engine is "producing power without doing work". Normal Car Idling: When starting the engine in parked condition, the minimum stable operating speed is called parking idle speed. For engines in good working condition, the idle speed is generally 550-800 RPM.
1
2
Share

How many years of history does the Land Rover Range Rover have?

Land Rover Range Rover has been in production since June 1970, with a history of over fifty years. Land Rover Range Rover: The Land Rover Range Rover is a luxury SUV under the Land Rover brand. Meticulously designed, it has become the most refined and robust Land Rover ever, utilizing the latest body and chassis technologies. Whether it's the breadth of its off-road capabilities and passability, or its on-road handling and comfort, the vehicle's all-terrain performance has been elevated to another level. Advantages of the Land Rover Range Rover: The overall design continues the classic boxy appearance, with the greatest advantages being its spacious interior, excellent handling, and fuel efficiency. It is equipped with three different engines, each with its own strengths, providing ample power performance overall and enhancing the experience for both passengers and drivers.
11
0
Share

What Causes the Clicking Sound When Braking in a Lynk & Co?

The reasons for the clicking sound when braking in a Lynk & Co are as follows: 1. Foreign objects adhering to the brake disc: Fine sand brought by water adheres to the brake disc, or in humid weather or large temperature differences between day and night, condensation or rust forms on the brake disc after rain, acting like tiny particles. Car brake pads come in hard and soft varieties. Hard pads are more wear-resistant, but if there are tiny particles between the hard pad and the gray cast iron brake disc, it can cause a sharp noise and a clicking sound when braking. 2. Missing screws: Loose or damaged screws fixing the brake disc can also cause abnormal brake noise. 3. Brake system malfunction: If the brake system malfunctions, it is necessary to visit a 4S shop or repair shop for inspection and repair.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.