Where is the engine mount rubber of the Mistra located?

What Causes a Scooter to Have No Idle Speed?

After starting the motorcycle, if the throttle grip cannot be fully released without the engine stalling, it is referred to as the motorcycle having no idle speed. If the idle speed fluctuates erratically with unstable RPM, it is called unstable idle speed. Generally, motorcycles are factory-adjusted to have a proper idle speed. If idle speed issues arise, repeated adjustments should be made according to the manufacturer's instructions. If the idle speed problem persists after repeated adjustments, the following causes may be responsible: 1. Incorrect ignition timing: This affects idle speed performance. The ignition timing should be adjusted as specified to ensure accuracy. 2. Engine air leaks: Check for proper sealing between the carburetor and the engine, as well as the spark plug, cylinder head, and crankcase. Ensure the spark plug is functioning correctly and the gap between its electrodes is properly adjusted. Verify that the idle jet in the carburetor is unobstructed and the air filter is clean to maintain proper airflow.

10

1

Share

At what speed should you shift gears?

1st gear is used for starting; 2nd gear corresponds to a speed of 5-20km/h; 3rd gear corresponds to 20-40km/h; 4th gear corresponds to 40-60km/h; and 5th gear corresponds to 60-100km/h. Introduction to manual transmission: A vehicle that uses a manual shift mechanical transmission (also known as manual transmission, MT) to adjust speed. This means that the gearshift lever must be manually moved to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed variation. The gearshift lever can only be moved when the clutch is depressed. Components of manual transmission: Gear shifting is achieved by switching different gear sets. As a key component in power distribution, the transmission must have two major parts: the power input shaft and the output shaft, along with the gears that make up the transmission, forming the most basic components of a manual transmission.

19

2

Share

Should You Downshift or Brake to Slow Down a Motorcycle?

When a motorcycle is traveling at high speed and needs to slow down, do not pull in the clutch. Simply rolling off the throttle will gradually reduce the speed. For faster deceleration, you can apply the brakes while rolling off the throttle, but it is best to avoid pulling in the clutch. This allows full utilization of the engine's braking capability and maintains optimal vehicle control. Additional Information: Precautions for Stopping a Motorcycle: To bring a motorcycle to a complete stop from high speed, first roll off the throttle while simultaneously applying the brakes. The throttle should be fully closed, but the clutch should not be pulled in. Braking can be applied simultaneously. Due to inertia, the motorcycle will not stall but will continue to coast until the speed drops sufficiently low. When the speed is low enough (no longer coasting), pull in the clutch to shift down to neutral, or hold the clutch and brake until coming to a complete stop before shifting to neutral.

1

3

Share

What causes the accelerator pedal to become stiff when the air conditioning is turned on in an Odyssey during summer?

When the air conditioning is turned on, the engine load increases, leading to a reduction in throttle vacuum, which in turn decreases the brake vacuum assist. However, this should not have such a significant impact that the brake pedal becomes difficult to press. There might be an issue with the brake vacuum system. Turning on the air conditioning consumes a large amount of vacuum, rendering the brake vacuum assist ineffective, resulting in a stiff pedal with no assistance. Relevant information about the Odyssey is as follows: 1. Introduction: The Odyssey is a vehicle launched by Honda, which went on sale nationwide in January 2007. It is equipped with a satellite navigation system, featuring an 8-inch large display screen and voice guidance functionality, and uses a 2.4L i-VTEC high-performance engine with variable valve timing and lift. 2. Configuration: The newly designed rear styling is completely refreshed, with sleek and harmonious lines of the novel rear combination taillights, giving it a more fashionable and dynamic appearance. The durable LED bulbs light up quickly and brightly, enhancing driving safety.

14

5

Share

Is it necessary to step on the accelerator in Subject 3?

Starting in first gear for Subject 3 does not require stepping on the accelerator. The challenging aspects of the Subject 3 test are as follows: 1. Mismatch between speed and gear: Errors related to high gear at low speed or low gear at high speed should be noted during the test. Before shifting gears, it is essential to adjust the speed to match the gear, then proceed with the gear shift. 2. Deviation in straight-line driving: Many trainees intentionally slow down the vehicle due to concerns about not driving in a straight line, which is not advisable. This behavior increases the likelihood of the vehicle deviating from its intended path. Therefore, maintaining a reasonable and consistent speed is recommended. 3. Parking more than 30cm from the curb: In the Subject 3 test, it is explicitly required that the distance from the curb when parking should not exceed 30cm. However, this distance is difficult for trainees to gauge, leading many to park too far from the roadside.

10

0

Share

What do the numbers and symbols on the engine mean?

The numbers and symbols on the engine indicate information such as the number of cylinders and the structure of the engine. Meaning of engine symbols: Front part: Represents the product series symbol and generation indicator symbol, which are designated by the manufacturer using appropriate letters as needed, subject to approval by relevant authorities; Middle part: Consists of symbols for the number of cylinders, stroke type, cylinder arrangement, and cylinder diameter; Rear part: Structural and usage characteristic symbols, represented by letters; Tail part: Differentiation symbol. When differentiation is required within the same product series due to improvements or other reasons, the manufacturer selects appropriate symbols. Meaning of numerical symbols: Common Arabic numerals include 4, 5, 6, and 7, which can be interpreted as the number of cylinders in the engine. For example, 4 represents a four-cylinder engine, 5 represents a six-cylinder engine, 6 represents an eight-cylinder engine, and 7 represents a twelve-cylinder engine.

20

3

Share

Where is the engine mount rubber of the Mistra located?

What Causes a Scooter to Have No Idle Speed?

At what speed should you shift gears?

Should You Downshift or Brake to Slow Down a Motorcycle?

What causes the accelerator pedal to become stiff when the air conditioning is turned on in an Odyssey during summer?

Is it necessary to step on the accelerator in Subject 3?

What do the numbers and symbols on the engine mean?

Does Replacing with an Aftermarket Electronic Throttle Have Any Impact?

How often is compulsory insurance for motorcycles paid?

Which Wire is the Starter Wire on a Motorcycle?

What Do the Numbers on the Back of a Motorcycle Represent?