Where is the Engine Exhaust Pipe Located?

1 Answers
DeCarson
07/29/25 3:47pm
The exhaust pipe of a car is located at the rear right side of the vehicle. Its low position serves to reduce vibration and noise, facilitate installation, and prolong the lifespan of the exhaust muffler system, thereby enhancing noise reduction effectiveness. Function of the Exhaust Pipe: The primary function of the exhaust pipe is to reduce engine noise and emissions of pollutants. Structure of the Automotive Exhaust System: The structure of a car's exhaust system is highly complex and not merely a simple pipe. The core components include the catalytic converter and the muffler. The catalytic converter transforms harmful gases such as CO, HC, and NOx emitted from the vehicle's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction processes.
Was this review help?
7
2
Share
More Forum Discussions

How to Unlock the Car When the Key is Locked Inside?

Methods to unlock the car door using the car key are: Mechanical key: Insert the mechanical key directly into the keyhole on the door to unlock it; Remote key: Press the unlock button to open the door. Method to replace the car key battery: Purchase the original battery for the car key, ensuring the voltage and model are the same; Remove the mechanical key, usually by pressing a small button, then pull it out; Use a small flat-head screwdriver to pry open the car key. There is a small gap in the middle of the key, and a gentle twist will open it; Pry out the old battery, install the new one, and reassemble the car key after installation. Reasons for car key failure: Car key issues: During daily use, the car key may run out of battery. Pay attention to the usage method while driving, keeping the locking and unlocking distance closer, as the farther the remote distance, the more power it consumes. Avoid pressing the remote key multiple times when locking the car; Car issues: When the car battery is low on power, the car key may also become unresponsive. It is necessary to monitor the car battery’s charge during use to prevent it from running out while driving, which could affect normal usage; Environmental issues: When parking, if the car is parked in an area with strong magnetic fields or where thieves may be using signal jammers to steal important items from the car, it may result in the inability to lock or unlock the car door.
5
4
Share

Is Manual Transmission Subject 2 Easier or Subject 3?

Subject 3 is more difficult than Subject 2. It's actually quite straightforward to understand. The pass rates tell the story. Last year during the exam, the pass rate for Subject 2 was approximately between 60-80%, while for Subject 3 it was around 40-50%. Since the end of 2013, the standards have relaxed slightly compared to earlier, leading to an increase in pass rates for both. However, Subject 2 consistently maintains a significantly higher pass rate than Subject 3. With sufficient practice, passing Subject 2 is relatively easy. For Subject 3, even with extensive practice, improvement isn't always guaranteed. Below are the examination processes for Subject 2 and Subject 3: 1. Subject 2: Conducted within the test center. Only requires engaging 1st gear without shifting to higher gears, and doesn't involve using the accelerator pedal. The vehicle is typically adjusted so that releasing the clutch provides enough power to move. Thus, after engaging 1st gear, the entire operation can be completed by simply using the brake and modulating the clutch. 2. Subject 3: Involves actual on-road driving. Requires clutch control, gear shifting, and quick adaptation to situations. The difficulty lies in the unpredictability of scenarios. For instance: a car might suddenly emerge at an intersection, or traffic flow at a roundabout is variable with no fixed pattern—sometimes light allowing smooth passage in 3rd gear, other times heavy requiring stops and shifts between 1st, 2nd, and 3rd gears without disrupting normal traffic. Additionally, navigating traffic lights or pedestrian crossings with jaywalkers or illegal U-turning vehicles can unsettle examinees, testing their ability to drive safely and adapt. Gear changes must be made promptly as needed.
18
1
Share

Can You Change the Oil Filter Without Changing the Oil?

It is not advisable to change only the oil without replacing the oil filter in a car. Here are specific details about the oil filter: 1. Introduction: The oil filter, short for oil cleaner, removes impurities such as dust, metal particles, carbon deposits, and soot particles from the oil, supplying clean oil to moving parts like the crankshaft, connecting rod, camshaft, turbocharger, and piston rings. It plays a role in lubrication, cooling, and cleaning, thereby extending the lifespan of these components. 2. Efficiency: After being used for a period, the filter element accumulates sludge and metal debris, reducing its filtering efficiency and significantly decreasing the oil pressure passing through the filter. 3. Working Principle: When the oil pressure drops to a certain level, the oil filter bypass valve opens, allowing unfiltered oil to enter the oil circuit through the bypass. The impurities carried can increase wear on mechanical parts and, in severe cases, may clog the oil passages, leading to mechanical failures.
6
4
Share

Does the Dash Cam Still Record When the Car is Turned Off?

When the car is turned off, the dash cam will stop recording as it relies on the car's electrical power to operate. Once the vehicle is powered down, the dash cam ceases to function. The purposes of a dash cam include: 1. Recording video and audio of the entire driving process; 2. Serving as a parking monitor; 3. Providing footage to assist in accident resolution. Installation steps for a dash cam: 1. Mount the dash cam rearview mirror; 2. Route the wiring; 3. Install the camera near the rear license plate; 4. Connect the camera wiring harness to the dash cam. How to use a dash cam: 1. Insert the memory card and press the power button to turn it on; 2. Press the mode button to switch between video recording, photo taking, and preview modes; 3. Selecting video recording mode will automatically start recording.
14
4
Share

How to Determine if a Vehicle is Pulling to One Side?

Start the car on a straight road, maintain a straight line during initial movement, and after reaching a certain speed, release the steering wheel. If the car drifts to one side, it indicates a problem with the vehicle. The following are the causes of vehicle pulling: 1. Uneven tire pressure: Mainly caused by inconsistent tire pressure in the drive wheels. Uneven tire pressure on the left and right sides will change the friction between the tires and the ground, so only consistent tire pressure can ensure the most basic requirement of not pulling to one side. 2. Different tread patterns or uneven tread depth on the two sides: It is best to use the same type of tires for the entire vehicle. At the very least, the two tires on the front and rear axles must be the same, and the tread depth must be identical. 3. Condition of the steering system: The condition of the steering system will also affect the straight-line driving of the car. Excessive wear in connecting parts or looseness caused by wear in bearings, kingpins, or bushings will cause the car to sway during driving and fail to maintain a normal trajectory. 4. Uneven cushioning due to deformation of front shock absorber springs on both sides: The condition of the shock absorber springs can be judged by pressing or comparing after removal. 5. Failure of front shock absorbers: After the front shock absorbers fail, the two suspensions will be at different heights during driving, resulting in uneven force distribution and causing the car to pull to one side. 6. Body deformation: Overall deformation of the vehicle, with a significant difference in wheelbase on both sides beyond the maximum allowable range, can be measured with a tape measure. If the range is exceeded, it must be corrected using a correction platform or replaced.
20
1
Share

What is the solution for the maintenance reminder?

The solution for the maintenance reminder is: 1. Turn the vehicle's ignition switch to the ON mode; 2. Press the SEL button until the maintenance prompt appears on the display; 3. Hold the ENTER button for 10 seconds. Maintenance items include: 1. Inspection of the braking system, air conditioning system, charging system, and chassis components; 2. Inspection of the vehicle body; 3. Inspection of the power battery system; 4. Inspection of the cooling system; 5. Inspection of the steering system. The benefits of car maintenance include: 1. Ensuring the vehicle is in optimal performance condition; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle issues; 5. Reducing noise and environmental pollution; 6. Keeping the vehicle's appearance clean and preventing damage.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.