Where is the emergency trunk release cable in the BMW 5 Series?

1 Answers
JosiahLynn
07/29/25 5:06pm
The emergency trunk release cable in the BMW 5 Series is located inside the trunk, featuring a red pull handle that simply needs to be pulled. Below is a partial introduction to the BMW 5 Series: 1. Background: The BMW 5 Series is a product of the German automaker BMW, classified as a mid-size sedan with a stylish appearance, making it highly favored by young professionals. It holds a significant market share in the domestic mid-to-high-end car market. 2. Exterior Design: The overall styling incorporates BMW's iconic design elements, with a sleek and elegant body, bold and dynamic appearance, and smooth lines. Netizens have commented, "The front end resembles the new 7 Series, very similar to the 7 Series, with an elongated body, and the 535 model features dual exhaust pipes on both sides."
Was this review help?
2
1
Share
More Forum Discussions

How long does it take to receive a temporary license plate when applying online?

When applying for a temporary license plate online, it will be delivered within five working days. Below is the relevant information regarding the placement of temporary license plates for vehicles: 1. One Plate: If there is one temporary license plate, it should be affixed to the lower left or right corner of the front windshield, ensuring it does not obstruct the driver's line of sight. 2. Two Plates: If there are two temporary license plates, one should be affixed to the front windshield, and the other should be placed on the lower left corner of the rear windshield inside the vehicle. If there is no space on the rear windshield, the second temporary license plate should still be carried in the vehicle. Below is additional relevant information: 1. Traffic Law Regulations: Vehicle owners should note that temporary license plates are subject to the same traffic laws as regular license plates. Therefore, do not assume that temporary plates allow for reckless behavior or that they are too small to be captured by cameras. In fact, high-definition cameras can clearly capture temporary license plates. 2. Types of Temporary Plates: There are two types of temporary license plates. One has a light blue background with black characters and black borders, which is only valid for driving within the city (local temporary plate). The other has a brown-yellow background with black characters and black borders, which allows for driving across cities (non-local temporary plate).
14
2
Share

Should the Car Cover Be Removed When It Rains?

After it rains, it is best not to remove the car cover. Wait until the weather clears up, and the cover will dry under the sun. Only after it is completely dry should you take it off and store it. If you remove it before it dries and leave it stored for a long time without drying, the car cover may develop mold and become more prone to damage. Additionally, the car's paint will not fade. Below are the main functions of a car cover: 1. Besides cleaning and sun protection, car covers also have excellent water-repellent properties, preventing damage from freezing in cold weather; effectively protecting against falling objects, fireworks, and other accidental factors that could harm the vehicle; and deterring theft of the vehicle and its accessories. 2. Spring: Protects against windblown sand, corrosive dust, pollen, tree sap, bird droppings, and damage from insects, ants, and animal claws. 3. Summer: Shields against UV rays, radiation, acid rain, and excessive sun exposure, preventing paint from fading, staining, or whitening, as well as keeping the car's interior leather and decorations from drying out. 4. Autumn: Guards against frost and icy dew. 5. Winter: Protects against rain and snow, ensuring the car's cooling system starts easily.
11
4
Share

What Are the Causes of Excessive Engine Oil Consumption in Cars?

Reasons for excessive engine oil consumption: 1. Worn or damaged piston rings, misaligned or incorrectly installed piston rings. When piston rings wear out, their elasticity weakens, reducing the pressure on the cylinder walls and diminishing their oil-scraping function. Additionally, wear between the piston rings and ring grooves increases side and back clearances, leading to more oil leakage, especially if the oil ring is damaged, which can multiply the leakage. Furthermore, misaligned or incorrectly installed piston rings create a pathway for oil splashed onto the cylinder walls to enter the combustion chamber, significantly increasing oil consumption. 2. Excessive clearance between the piston and cylinder wall. If the fit between the piston and cylinder wall is too loose or the cylinder becomes tapered or oval-shaped, the piston rings, piston, and cylinder wall cannot seal properly. This allows splashed oil to enter the combustion chamber and burn, causing a sharp rise in oil consumption. 3. Use of low-viscosity oil. Low-viscosity oil is more prone to entering the combustion chamber and has a thinner oil film, making it easier to burn. Additionally, low-viscosity oil has a higher evaporation rate. 4. High engine speed. The higher the engine speed, the greater the centrifugal force on the crankshaft and connecting rods, which increases the amount of oil splashed onto the cylinder walls. As a result, the oil ring cannot scrape off the oil fast enough, leading to more oil entering the combustion chamber and burning.
14
0
Share

Why does the car suddenly shake when idling?

Car idling shaking is caused by severe engine carbon deposits, ignition system failure, unstable oil pressure, and aging engine components. Severe engine carbon deposits, excessively dirty throttle, or excessive carbon deposits in the fuel injector are the most common causes of engine shaking. Here is a detailed explanation: 1. After a car has been driven for a period of time, a dirty throttle can cause the throttle to not close tightly or the idle stepper motor to get stuck, both of which can result in excessively high engine idle speed. Carbon deposits generated during engine operation can also cause vehicle shaking, especially when starting the vehicle. The engine may shake more than usual, and sometimes it may even fail to start on the first attempt. 2. Ignition system failure: Spark plugs, high-voltage wires, and ignition coils may experience poor ignition system performance after working for a certain period. 3. Unstable oil pressure: Abnormal fuel pump supply pressure or incorrect and poor performance of the intake pressure sensor can cause engine shaking. 4. Aging engine components: Turning on the electrical system when the car engine is idling will increase the engine load, causing the idle speed to drop. To compensate for the shaking caused by the drop in idle speed, the engine will automatically increase the speed slightly. If the shaking during idling does not decrease when the car's air conditioning compressor is running, it may be due to aging engine mounts, which need to be replaced promptly.
16
5
Share

How to Permanently Disable Auto Start-Stop?

Auto start-stop cannot be permanently disabled, it can only be turned off each time. Generally, vehicles equipped with auto start-stop have this function enabled by default. To disable it, the owner can simply press the auto start-stop button, and the instrument panel will usually indicate that the system is turned off. If you want to use this function again, press the button to reactivate it. Auto start-stop refers to the engine automatically shutting off during temporary stops, such as waiting at a traffic light, and automatically restarting when the car begins to move. This is achieved by installing an enhanced motor with idle start-stop functionality in a traditional engine, allowing the engine to completely shut off when idle stop conditions are met.
1
1
Share

What maintenance is required for a sedan at 20,000 kilometers?

Generally, the 20,000-kilometer maintenance for a car is considered a major service, typically the third maintenance session. Routine items include changing the engine oil, oil filter, air filter, cabin air filter, and spark plugs. Below is a detailed explanation: 1. Replacing the engine oil and oil filter is essential. Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, and its performance degrades considerably. Over time, it fails to protect the engine effectively. The oil filter prevents impurities from mixing with the oil, which can cause oxidation, leading to sludge and clogging the oil passages. Both the engine oil and oil filter should be replaced simultaneously. 2. The air filter's role is to block dust and particles that the engine might inhale during the intake process. If the filter is not cleaned regularly, it can lead to dust entering the engine, causing abnormal wear on the cylinder walls. If it wasn't replaced during the 10,000-kilometer maintenance, it must be replaced at the 20,000-kilometer service. 3. If the car uses standard material spark plugs, preparations should be made to replace them at 20,000 kilometers. Spark plugs directly affect the engine's acceleration performance and fuel efficiency. If you notice a lack of engine power while driving, it's time for maintenance. The lifespan of spark plugs varies depending on the material used.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.