Where is the emergency start position for the Equinox key?

What is the difference between 5W20 and 5W30 engine oil?

The differences between 0W20 and 5W30 engine oil are twofold. Here are the specific details: 1. Different low-temperature starting performance: The 'W' stands for WINTER, and the number before 'W' represents the flow performance at low temperatures. The smaller the number, the better the starting performance at low temperatures. This means 0W20 has better starting performance than 5W30 in cold conditions. 2. Different high-temperature stability: The number after 'W' represents the stability of the oil at high temperatures (i.e., the likelihood of thinning). The larger the number, the better the high-temperature stability of the oil. Thus, 5W30 has better high-temperature stability than 0W20.

17

3

Share

Why does the engine fault light come on when the car is not ignited?

The engine fault light may come on when the car is not ignited due to the following reasons: 1. Faulty air flow sensor. If the air flow sensor or its circuit malfunctions, the ECU cannot receive the correct intake air signal, leading to improper fuel control and resulting in either too lean or too rich fuel mixture, causing the engine to malfunction. 2. Spark plug carbon buildup. Carbon buildup on spark plugs can cause poor engine performance, including difficulty starting, unstable idling, poor acceleration, backfiring during sudden acceleration, excessive exhaust emissions, and increased fuel consumption. 3. Engine knocking. When the engine inhales the air-fuel mixture, if the mixture ignites spontaneously before the compression stroke reaches the intended ignition point due to uncontrolled factors, the resulting shockwave opposes the piston movement, causing engine vibration, known as knocking. Symptoms include weak car performance, excessive engine noise, and, in severe cases, knocking sounds. 4. Damaged coolant temperature sensor. The coolant temperature sensor contains a thermistor with higher resistance at lower temperatures and lower resistance at higher temperatures. When the engine is cold, the sensor sends a signal to the ECU to enrich the air-fuel mixture for stable operation. If the sensor fails to send this signal, the mixture becomes too lean, causing abnormal engine operation. 5. Engine misfire. An obvious misfire leads to increased fuel consumption, black smoke emission, poor acceleration, and severe shaking.

6

1

Share

How to Replace the Battery in a Chery Tiggo 5 Remote Key?

Replacing the battery in a Chery Tiggo 5 remote key involves 7 steps. Here are the details: 1. Locate the clip on the car remote and push it outward. 2. Pull out the mechanical key with force. 3. Use the key to pry open the remote's casing. 4. Remove the circuit board with the battery from the remote's casing. 5. Replace it with a new battery prepared in advance. 6. Reinstall the circuit board back into the remote's casing. 7. Press the two halves of the casing together firmly. How the remote key works: First, the key emits a weak radio wave, which is received by the vehicle's antenna. The electronic control unit (ECU) then identifies the signal code, and the system's actuator (motor or electromagnetic coil) executes the lock/unlock response.

6

5

Share

What do the letters on an automatic transmission mean?

Automatic transmission letters include P, R, N, D, L, S, and OD. Below is a detailed introduction to each gear: 1.P: Parking gear, start gear. When you park, you can shift the gear to the P position. At this time, the transmission's parking brake device will lock the output shaft, ensuring the vehicle does not move even on a slope. 2.R: Reverse gear, used when reversing. When parking or reversing into a garage, you can shift into R gear. Vehicles with a rearview camera will display the rearview image when shifted into R. 3.N: Neutral gear. Used for temporary stops (e.g., at a red light). Note that this gear is neutral; to prevent the vehicle from rolling on a slope, always keep the brake pressed. 4.D: Drive gear, also known as the driving gear. The advantage of an automatic transmission is that once you shift into D gear, your speed depends entirely on how much you press the accelerator. 5.L: Low gear. When going downhill or on a long slope, shifting into this gear limits the car to the lowest gear, allowing the engine to assist in braking. This prevents the brake pads from overheating due to prolonged braking, which could be dangerous. 6.S: Sport mode. When shifted into this gear, the transmission can switch gears freely. 7.OD: Overdrive gear, used for high-speed driving to save fuel.

9

2

Share

Will Replacing the Exhaust Header Make the Sound Louder?

Replacing the exhaust header will make the sound louder. Header: The "banana" refers to the header of the exhaust pipe, named for its banana-like shape, hence called "banana" or "header." Modern headers are typically integrated, while some older cars in movies may feature exposed headers, though they are rarely seen in daily life. Mid-Pipe: This connects the header to the tailpipe and can also improve horsepower by 3-4 HP. Usually, the mid-pipe is a long tube linking the header and tailpipe, often equipped with a resonator. Tailpipe: The exhaust tailpipe includes the piping, muffler, and exhaust tip (tailpipe outlet). Its primary functions are noise reduction and decoration, making it the most crucial part of the exhaust system. The exhaust tip is a component installed at the end of the factory exhaust.

13

4

Share

Is it normal to have oil in the exhaust gas valve?

Having oil in the exhaust gas valve is not a normal phenomenon. In such cases, it is necessary to promptly inspect the vehicle at a 4S shop or a repair shop, as it may be caused by a damaged exhaust gas valve that requires immediate replacement. The exhaust gas valve is primarily used in automobiles to reduce tailpipe emissions and minimize the generation of pollutants. Below is relevant information about the exhaust gas valve: 1. The exhaust gas valve, also known as an oil separator or pressure control valve, is installed between the compressor outlet and the condenser inlet. Through separation, it improves the heat transfer efficiency in the condenser and evaporator. Its function is to allow exhaust gases to be recirculated into the cylinder for combustion, which reduces the combustion temperature in the cylinder and lowers the NOX content in the exhaust gases. 2. Working principle of the exhaust gas valve: High-pressure gas from the compressor, along with gaseous working medium and lubricating oil, enters the exhaust gas valve and passes through the guide vanes, flowing in a spiral pattern. The lubricating oil is separated from the working medium gas by centrifugal force and gravity, flowing along the inner wall of the cylinder. The working medium gas is discharged from the center pipe of the exhaust gas valve through a multi-baffle plate. The separated lubricating oil accumulates at the bottom of the oil separator and can be periodically drained or automatically returned to the compressor's crankcase using a float valve. For systems where the lubricating oil and working medium have poor mutual solubility, the oil separator is particularly important.

5

0

Share

Where is the emergency start position for the Equinox key?

What is the difference between 5W20 and 5W30 engine oil?

Why does the engine fault light come on when the car is not ignited?

How to Replace the Battery in a Chery Tiggo 5 Remote Key?

What do the letters on an automatic transmission mean?

Will Replacing the Exhaust Header Make the Sound Louder?

Is it normal to have oil in the exhaust gas valve?

What Causes Abnormal Noises in a Car Engine?

How to Adjust the High and Low Beams of Car Headlights?

Fuel consumption of Geely Vision S1?

What are the hazards of frequently revving the engine in neutral gear?