Where is the emergency P-gear release button for the Volvo S90?

3 Answers
DiGrant
07/28/25 12:27pm
The emergency P-gear release button for the Volvo S90 is located at the head of the vehicle's gear lever. P-gear release switch: At the head of the vehicle's gear lever, there is a large button. Pressing it will unlock the P-gear of the automatic transmission vehicle, allowing you to move the gear lever out of the P-gear position. Introduction to the Volvo S90: The Volvo S90 currently has 5 models on sale, featuring 1 type of engine displacement (2.0T) and 1 type of transmission (manual-automatic). The engine has a maximum power of 187.0kW, maximum horsepower of 254PS, and maximum torque of 350.0N·m.
Was this review help?
17
1
Share
LaGabriel
08/11/25 5:14pm
I remember driving a Volvo S90 for several years. The emergency P-release button is usually located in a small hole on the right side of the gear lever. You can release it by inserting a thin rod, such as the tip of a key, and pushing it. The hidden design is to prevent accidental contact while driving, and it is only used in emergencies, such as when the battery runs out and the gear gets stuck. Once, while driving on a mountain road, my car suddenly stalled and couldn't move. I relied on this button to get out of trouble. Later, I also found it to be a great helper for temporary malfunctions, but it's recommended to go to the shop immediately to check the circuit after using it. The button is located on the central console near the driver's side. For the exact position, refer to the user manual illustration for accuracy. Don't underestimate this button—it can save you towing fees at critical moments. During regular car maintenance, I often glance at its location to develop a habit for peace of mind. After all, driving safety is the most important thing; don't wait until something happens to figure it out.
Was this review help?
17
4
Share
Expand All
VanJosiah
09/28/25 7:01am
As an average car owner, finding the P-gear emergency release button on the Volvo S90 isn't difficult—it's located in a small recess next to the gear shift lever, usually covered by a small plastic flap. You can manually release the P-gear by poking it with a toothpick or hairpin. This is a common design point in the center console area, easily reachable from the driver's side. Once, when my car was parked in the garage and the battery suddenly died, locking the gear in place, knowing the button's location beforehand saved me. It's simple to operate but should only be used in emergencies to avoid potential damage from unnecessary testing. It helped me avoid extra repair costs, and I recommend new owners familiarize themselves with it upon delivery, cross-referencing the owner's manual for precise details. If you're unsure about the location, checking the official owner forums for shared diagrams can provide a clearer visual aid, reducing panic in unexpected situations.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

Which Volkswagen model starts with the letter S?

Volkswagen models starting with S include: Sagitar, Scirocco R, Scirocco, Santana, and Santana Vista. The Scirocco R is the high-performance version of the Scirocco. The relationship between the Scirocco R and Scirocco is similar to that between the Golf and Golf R. The Scirocco is an imported model that has been discontinued. Production of the Santana Zhijun ceased in 2014. In the first half of 2014, a batch of rental versions of the Zhijun was produced as a temporary measure. On March 18, 2019, the third-generation Sagitar (2019 model) was launched. Official guide price: 128,900~191,900 RMB. The Sagitar is positioned as a compact car, with body dimensions of 4753/1800/1462 mm (length/width/height) and a wheelbase of 2731 mm.
11
3
Share

How to Apply for a Temporary Vehicle License Plate?

Original vehicle certificate and one copy. For imported vehicles, it's the import certificate, along with a copy of the third original copy of the compulsory traffic insurance policy. Original and copy of the first page of the vehicle purchase invoice, original and copy of the owner's ID card. If applying through an agent, the agent's original ID card and a copy are required. Non-local vehicle owners need to provide the original and a copy of the owner's temporary residence permit. The process for applying for a temporary license plate involves bringing all the required documents to the traffic management department, filling out the temporary license plate application form, then submitting the application at the counter to receive the temporary license plate. The entire process takes about twenty minutes and costs only a little over ten yuan.
3
1
Share

Where is the air filter of the Qashqai located?

The air filter of the Qashqai is located behind the glove box on the passenger side. Additional information: Function of the air filter: The air filter serves a filtration purpose, cleaning the air entering the cabin from outside, thereby improving air purity. The typical filtration targets include impurities in the air, such as tiny particles, pollen, bacteria, industrial exhaust, and dust. The air filter prevents these substances from entering the air conditioning system, protecting the system from damage, providing a good air environment for passengers, safeguarding their health, and preventing window fogging. Cleaning tips: If the filter is dirty, clean it by blowing compressed air from the opposite side. Hold the air gun about 5 cm away from the filter and blow at a pressure of 500 kPa for approximately 2 minutes. The air filter tends to accumulate a lot of dust, and blowing compressed air can remove the loose dust.
16
2
Share

How to use the Nissan Sylphy igniter?

Directly press the one-touch start button and keep the brake pedal depressed to start the vehicle. Additional information is as follows: Igniter: An igniter refers to a device that can provide sufficient energy in an instant to ignite pulverized coal, oil (gas) fuel and stabilize the flame. The automobile igniter is a system for starting the vehicle's engine. The igniter mainly consists of a power source, ignition coil, distributor, ignition switch, spark plug, additional resistor and its short-circuit device, high and low voltage wires, etc. The causes of igniter failure are as follows: Poor contact in the circuit, circuit damage causing grounding, etc.; The igniter chip has a high-speed misfire phenomenon; The red and black wires of the sensor are connected in reverse.
6
3
Share

How Many Kilometers Between Each Maintenance for the 10th Generation Accord?

The maintenance interval for the Accord is every 5,000 kilometers. Additional information is as follows: First Maintenance for the Accord: The first maintenance for the Accord is performed at 5,000 kilometers. This free maintenance can be done at any GAC Honda 4S store nationwide. The main tasks include checking the vehicle's condition and replacing the engine oil and oil filter. Subsequent maintenance services will be based on this, with decisions made on whether to replace or clean/add various fluids and parts depending on their wear and tear. Transmission Fluid Replacement Cycle for the Accord: The transmission fluid replacement cycle for the Accord varies by model. The 2.0L and 2.4L models, which use a CVT transmission, require transmission fluid replacement every 40,000 kilometers. The 3.0L model, equipped with a 6AT transmission, has a transmission fluid replacement cycle of every 60,000 kilometers.
1
3
Share

How Many Cylinders Does the Lynk & Co 03 Engine Have?

Lynk & Co 03 engines come in both three-cylinder and four-cylinder configurations. The 1.5-liter turbocharged engine is a three-cylinder, while the 2.0-liter turbocharged engine is a four-cylinder. Additional Information: Power Performance: The Lynk & Co 03 is a compact car that utilizes three different engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. All 1.5T models of Lynk & Co use three-cylinder engines. Characteristics of Three-Cylinder Engines: Three-cylinder engines are lightweight and compact. Using this type of engine can reduce exhaust emissions and save fuel. The crankshaft of a three-cylinder engine is also shorter, making the engine very compact and lightweight. Using a three-cylinder engine can reduce the overall weight of the vehicle, which helps improve fuel economy.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.