Where is the electronic parking brake for Mercedes-Benz's column shifter located?

What is the Key to Assessing Damage After a Vehicle is Flooded?

The key to assessing damage after a vehicle is flooded is whether a secondary start-up was attempted, because according to insurance regulations, if the engine is damaged due to a secondary start-up, the insurance company may refuse to cover the claim. Here is a detailed introduction to the insurance claim situation for water-damaged vehicles: If a vehicle is parked and gets flooded, the insurance company will fully compensate if the vehicle has comprehensive insurance. If a vehicle is flooded while driving, this involves whether the vehicle has flood insurance or comprehensive insurance. If insured, the insurance company will fully compensate. If a vehicle is flooded while driving and there is a secondary ignition after the engine stalls, it is not covered by insurance. If the vehicle does not have comprehensive insurance, the insurance company will not provide compensation, and the owner will need to pay for repairs after the vehicle is flooded.

5

4

Share

What are the three scenarios of half-turn reversal in right reverse parking?

"There are three scenarios where you don't need to straighten the wheel during a half-turn reversal in right reverse parking: when seeing the right corner of the garage entrance to straighten, and when the right rear wheel enters the garage. When reversing, you need to engage the reverse gear and slowly back up. When the lower edge of the left rearview mirror aligns with the control line, quickly turn the steering wheel fully to the right. The key to the half-turn reversal in reverse parking lies in observing the right rearview mirror. When the car body covers the middle dashed line in front of the garage, turn the steering wheel half a turn to the left. First scenario: No need to straighten, keep turning fully right to enter the garage, then straighten the wheel when the car body is aligned. Second scenario: After seeing the right corner of the garage entrance and straightening the wheel, maintain the direction until the right rear wheel enters the garage (i.e., the bumper enters the garage, which is considered entering as long as it's within the garage entrance), then quickly turn fully right and straighten the wheel when the car body is aligned. Third scenario: Similarly, maintain the direction until the right rear wheel enters the garage (i.e., the bumper enters the garage, which is considered entering as long as it's within the garage entrance), then quickly turn fully right and straighten the wheel when the car body is aligned."

9

5

Share

What is the total loss standard for water-damaged vehicles?

Water-damaged vehicles are deemed a total loss when the vehicle is completely destroyed and cannot be repaired, or the cost of repair reaches or exceeds the actual value of the vehicle. Below is relevant information about total loss of vehicles: Actual Total Loss: This refers to the vehicle being completely destroyed and beyond repair. Constructive Total Loss: Although the vehicle can still be repaired, the cost of repair reaches or exceeds the actual value of the vehicle, making the repair neither valuable nor necessary. Therefore, it can be treated as a total loss. 3. Total Loss Calculation Formula: Total Loss Amount = [New Vehicle Purchase Price at the Time of Incident - Market Price of Intact New Parts] × (1 - Depreciation Period × Depreciation Rate) - Residual Value.

4

0

Share

What Causes the Squealing Noise in a Newly Replaced Belt?

Newly replaced belts may produce a squealing noise due to the presence of metal, stones, or other impurities on the friction surface, or because the belt tension is inappropriate. Reasons for Replacement: To ensure the normal operation of the engine and extend its service life, reliable and regular maintenance is essential. For ordinary vehicles, the engine belt should be replaced after one and a half to two years of use. If the mileage reaches 60,000 kilometers, replacement is necessary. Hazards of Belt Breakage: If the belt breaks while driving, it poses a significant safety risk. In such cases, the owner cannot replace the belt themselves and must rely on a repair shop. Considering various factors, replacement is recommended when the total mileage reaches 80,000 kilometers. Solutions for Belt Noise: If the belt makes unusual noises, first check the assembly. The noise may be caused by friction between the timing belt and the timing cover. Loosening the screws on the timing cover by half a turn can help determine if the noise disappears. Additionally, inspect the condition of the generator belt. If the noise comes from the accessory belt, it might be due to the timing belt being adjusted too tightly. Removing the generator and air conditioning power steering belts can help identify if the issue lies with these belts.

1

4

Share

How Much Water in the Passenger Seat is Considered Serious?

A small amount of water in the passenger seat is not a major concern, but if standing water forms, it becomes more serious and needs to be drained as soon as possible. Additional information is as follows: Hazards: If not addressed promptly, it can lead to mold inside the vehicle and damage to wiring harnesses or control units. Treatment: Depending on the severity of the water ingress, remove all seats from the cabin. Take out floor mats, carpets, and other components. Remove any moisture inside. Dry the carpets and floor mats in the sun. Replace any damaged control units. Electrical wiring that has been exposed to water must be cleaned to remove moisture and dampness. While addressing the interior water, always check the cause of the water ingress.

2

Share

How long does it take for fuel consumption to return to normal after adding fuel additive?

After using up the tank of fuel with the fuel additive, the fuel consumption will gradually decrease. Here are the specific details about fuel additives: Function: Fuel additive, commonly known as the third generation gasoline detergent (also referred to as gasoline detergent or fuel additive), is designed to address carbon deposits in the fuel system of fuel injection vehicles, quickly restore the engine to optimal working conditions, and compensate for certain deficiencies in gasoline while imparting new beneficial characteristics (such as improving atomization, reducing wear, protecting the engine, lowering emissions, etc.). Composition: Fuel additives mainly consist of more than ten components, including nano-molecules, cleaning activation factors, antioxidants, anti-corrosion agents, and demulsifiers. These are specifically developed to target harmful substances in fuel, such as sulfur, gum substances, and engine carbon deposits, thereby enhancing power, promoting combustion, providing anti-oxidation, anti-wear, cleaning, dispersing, demulsifying, anti-corrosion, and lubricating effects.

9

1

Share

Where is the electronic parking brake for Mercedes-Benz's column shifter located?

What is the Key to Assessing Damage After a Vehicle is Flooded?

What are the three scenarios of half-turn reversal in right reverse parking?

What is the total loss standard for water-damaged vehicles?

What Causes the Squealing Noise in a Newly Replaced Belt?

How Much Water in the Passenger Seat is Considered Serious?

How long does it take for fuel consumption to return to normal after adding fuel additive?

What does the ECO indicator on the car mean?

What to Do If Driving License Renewal Is Overdue?

What are the hidden features of the 2021 CR-V?

How to deal with water entering the car through an open window without causing standing water?