Where is the electronic parking brake control module of the Geely Boyue located?

What type of vehicle can a P-class driver's license drive?

P-class driver's license is a type of driver's license that permits the holder to operate trams. Driver's licenses are divided into 15 classes: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, P, with each class permitting different types of vehicles. Below are the minimum age requirements for each license class: 1. For C1, C2, and F, the applicant must be between 18 and 70 years old. 2. For C3, C4, D, E, or M, the applicant must be between 18 and 60 years old. 3. For A3, B1, B2, N, or P, the applicant must be between 21 and 50 years old. 4. For A2, the applicant must be between 24 and 50 years old. 5. For A1, the applicant must be between 26 and 50 years old.

15

0

Share

Is 19 kilometers normal for a new car?

19 kilometers is generally normal. Typically, the mileage of a new car is considered normal if it is within 50 kilometers. A new car goes through a break-in period, and here are some precautions to take during this period: 1. Try to avoid emergency braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 2. Avoid overloading: If a new car is operated at full load during the break-in period, it can cause damage to the mechanical parts. Therefore, within the first 1000 kilometers of driving, the load should generally not exceed 75%-80% of the rated capacity. 3. High-speed driving: If a new car is driven long distances during the break-in period, the engine's continuous working time will increase, which can easily lead to wear and tear on mechanical parts. It is recommended that when driving at high speeds, the speed should not exceed 120 km/h and the engine speed should not exceed 3000 rpm.

13

0

Share

Will Tubeless Tires Leak Air?

Tubeless tires normally do not leak air. The outer edge of a tubeless tire features a smooth airtight layer. After inflation, the air pressure tightly presses the tire against the wheel rim, preventing air leakage. The higher the air pressure, the tighter the seal, resulting in better airtightness. Safety: The surface of a tubeless tire is made of rubber. After inflation, the surface tension increases, creating internal pressure that enhances its self-sealing capability against punctures. Even if punctured, the tire won't deflate instantly. Durability: With a zero-degree crown angle, tubeless tires experience minimal deformation during high-speed driving, maintaining better stability and reduced friction. This aids in absorbing vibration impacts and improving vehicle speed. Stability: Tubeless tires are sealed as a single unit with the wheel rim, requiring high manufacturing precision. Most use integrated die-cast aluminum wheel rims, ensuring high positioning accuracy between tires and minimal radial runout, thus providing excellent driving stability.

11

3

Share

Can the BMW Display Key remotely start the vehicle?

If the remote start option is installed, the vehicle can be remotely started within the key's operating range. Remote start methods: For traditional remote keys: Press the lock button three times consecutively. For the Display Key: Swipe to unlock, locate the remote control interface, then press and hold the central START/STOP button for approximately 2 seconds until the engine starts (the button will turn green). Via the BMW Connected app on your smartphone: Navigate to the vehicle menu, which displays the vehicle status and control buttons. Locate the ventilation button (fan-shaped icon), tap it to access the remote engine start option, then confirm. Display Key functions: Remotely start the engine. In summer, activate parked car ventilation to precool the interior. In winter, for vehicles equipped with a preheating system, it can warm up the cabin in advance. Check security information such as whether doors, windows, sunroof, or trunk are properly closed. View vehicle data including fuel consumption, tire pressure, remaining range, and other information.

1

3

Share

Should Right-Turning Vehicles Yield to Straight-Going Vehicles?

Right-turning vehicles should yield to straight-going vehicles. Relevant legal provisions: When there are traffic signs or markings indicating priority, the party with the right of way should proceed first; in the absence of traffic signs or markings, vehicles must stop and look before entering the intersection, yielding to vehicles coming from the right; turning motor vehicles must yield to straight-going vehicles; right-turning vehicles from opposite directions must yield to left-turning vehicles. Introduction to travel lanes: A travel lane refers to the highway strip portion designated for various vehicles to align longitudinally and travel safely and smoothly. Travel lanes are composed of individual lanes, which are sections designated for single-file vehicle movement. Travel lanes include only driving lanes and overtaking lanes, excluding other special-purpose lanes such as steep slope lanes or speed-change lanes. Due to their different functions and purposes, these are not counted as part of the travel lanes. Therefore, in China, the width of travel lanes is calculated by multiplying the number of lanes by the lane width.

11

1

Share

What Causes the Clicking Sound in BMW's Chassis After Parking?

There are many reasons for abnormal noises in the chassis of a BMW after parking. Below is a detailed analysis of the specific causes of these noises: 1. Cooling sound of the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is 400-800°C. After the engine is turned off, its operation gradually stops, and the temperature decreases. The metal components inside then undergo thermal expansion and contraction, resulting in abnormal noises. 2. Cooling sound of the exhaust pipe: Typically, the exhaust pipe reaches temperatures above 200°C during cold idling. Under high load or when the air-fuel mixture burns in the exhaust pipe, the temperature can be even higher. Consequently, the exhaust pipe also experiences thermal expansion and contraction, producing abnormal noises, often originating from the front end or flexible joint of the exhaust pipe. 3. Cooling sound of the turbocharger: Under normal conditions, exhaust gases can reach temperatures up to 700°C, accelerating the friction-induced heat in the rapidly spinning turbocharger. After shutdown, the thermal expansion and contraction are quite pronounced, leading to abnormal noises.

19

3

Share

Where is the electronic parking brake control module of the Geely Boyue located?

What type of vehicle can a P-class driver's license drive?

Is 19 kilometers normal for a new car?

Will Tubeless Tires Leak Air?

Can the BMW Display Key remotely start the vehicle?

Should Right-Turning Vehicles Yield to Straight-Going Vehicles?

What Causes the Clicking Sound in BMW's Chassis After Parking?

Should the timing mark on the 474 engine camshaft align with e or i?

What Causes the Jerking Sensation When Releasing the Throttle in a BMW?

How to Replace the Car Air Conditioning Filter?

What do the various lights on a motorcycle dashboard represent?