Where is the electronic parking brake control module of Geely Boyue located?

1 Answers
StDante
07/29/25 5:13pm
Geely Boyue's electronic parking brake control module is located in the central tunnel area or under the left side of the driver's dashboard. Additional relevant information is as follows: Electronic Parking Brake: The electronic parking brake is a technology that achieves parking braking through electronic control. Working Principle: Its working principle is the same as that of a mechanical handbrake, both of which tighten the rear wheel brake shoes through cables for braking. Another type uses an electromechanical caliper, which clamps the brake pads through a motor to achieve parking brake control. Electronic Parking Brake System: The electronic parking brake system integrates the temporary braking function during driving with the long-term braking function after parking, and achieves parking braking through electronic control technology.
Was this review help?
5
3
Share
More Forum Discussions

Where is the Honda Civic factory located?

Honda Civic factory is located at No. 283, Checheng East Road, Wuhan Economic and Technological Development Zone, Wuhan, Hubei Province. Relevant information is as follows: 1. In terms of interior design, it continues the style of previous models, using soft materials for wrapping, complemented by silver or metal decorative pieces and a full-color LCD instrument panel. 2. In terms of power, the domestically produced new Civic will be equipped with 1.0T/1.5T turbocharged engines for selection. The 1.5T engine has a maximum power of 177Ps and a peak torque of 220Nm, paired with a 6-speed manual or CVT transmission.
2
3
Share

How Early Should You Arrive for Subject 2 Driving Test?

It is advisable to arrive at the test center at least half an hour before the scheduled time for Subject 2, as identity verification and test preparation are required upon arrival. Students should bring their ID card and admission ticket. After being organized by the driving school to arrive at the test center, they should check in at the waiting hall 30 minutes in advance according to their scheduled test session by swiping their ID card to obtain a check-in number. Please pay attention to the announcements in the hall and the information displayed on the screens. When your name is called, follow the instructions to the designated test lane and wait for the examiner to board the car for the test. After getting into the car, fasten your seatbelt first, then adjust the seat to the position you used during practice, and adjust the rearview mirror for better visibility. Confirm with the examiner that you are ready to start the test, and then begin according to the voice prompts. The manual transmission test includes items such as reversing into a garage, parallel parking, curve driving, right-angle turns, and stopping and starting on a slope. The automatic transmission test excludes the stopping and starting on a slope item. If you fail the first attempt, you will proceed to a second attempt immediately. The process is the same as the first attempt, using the same car and the same test lane, and fingerprint verification is required again. If you fail the retest, you need to schedule another test after 10 days. Candidates who pass the test should leave the test center promptly without disturbing others, and finally submit the required documents and sign out.
6
4
Share

Is the transmission used in the Audi Q2L dry or wet?

The Audi Q2L uses a 7-speed dry dual-clutch transmission. A 7-speed dual-clutch transmission refers to a dual-clutch gearbox with seven forward gears, also known as a 7-speed DCT, which employs a dry clutch. Dual-clutch transmissions differ from conventional automatic transmission systems as they combine aspects of both manual and automatic transmissions. In addition to offering the flexibility of a manual transmission and the comfort of an automatic transmission, they also provide uninterrupted power output. The Audi Q2L's transmission is supplied by Volkswagen. The Volkswagen Group operates 68 wholly-owned and joint-venture companies worldwide, with business areas covering automotive R&D, production, sales, logistics, services, auto parts, car rental, financial services, auto insurance, banking, IT services, and more. For the Audi Q2L's transmission, the following points should be noted during daily use: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While many experienced drivers may coast in neutral when driving manual transmission vehicles, doing so in an automatic transmission vehicle can cause overheating and result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, may shift into reverse gear while the vehicle is still moving, which can severely damage the transmission gears and lead to grinding or other faults over time. Avoid frequently climbing steep slopes in Drive (D). Automatic transmission vehicles may overheat under high load or shift too early, causing a lack of power when climbing steep slopes. In such cases, using manual mode to lock in a lower gear or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Towing the vehicle directly with a tow rope or similar method should be avoided.
8
5
Share

Is It Allowed to Drive in High Heels?

Driving in high heels is not allowed and is considered illegal. According to Article 49 of the "Road Traffic Safety Law of the People's Republic of China": The owner, manager, or driver of a motor vehicle shall not engage in the following behaviors: 1. Handing over the motor vehicle to someone who does not possess a valid motor vehicle driver's license, whose license has been revoked or temporarily suspended, or who is otherwise unqualified to drive. 2. Driving a motor vehicle barefoot, in slippers, or in high heels. 3. While driving a two-wheeled motorcycle or a light motorcycle, engaging in chasing each other, holding onto other vehicles, zigzag racing, or carrying a passenger in front of the driver.
13
3
Share

How to Remove the Rear Bumper of a Lavida?

Method for removing the rear bumper of a Lavida: Open the rear trunk. The rear bumper is primarily secured by screws and clips. There are fixing screws between the bumper sides and the wheel arch liners, as well as at the bottom of the body. After removing all the screws, pull firmly to detach the bumper. Additional information about the bumper is as follows: 1. The car bumper (also known as the crash beam) is located in most areas at the front and rear of the vehicle. It is designed to prevent external damage from affecting the vehicle's safety systems and has the capability to reduce injuries to passengers during high-speed impacts. 2. The car bumper is a safety device that absorbs and mitigates external impacts, protecting the front and rear parts of the vehicle. In addition to maintaining its original protective function, the front and rear bumpers also aim to harmonize with the vehicle's styling and achieve lightweight construction. 3. The front and rear bumpers of a car are made of plastic and are referred to as plastic bumpers. A plastic bumper consists of three parts: the outer panel, cushioning material, and crossbeam. The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping 1.5mm-thick cold-rolled sheet metal into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is connected to the vehicle's frame longitudinal beams with screws, allowing for easy removal when needed.
10
0
Share

Which country does Land Rover belong to?

Land Rover was originally a brand under Jaguar Land Rover Automotive PLC of the UK, and now belongs to India's Tata Group, but its production bases remain at the Halewood and Solihull plants in the UK. The brand's English name is Rover, which refers to a Nordic ethnic group. Since the Rover people were a brave and warlike pirate nation, the Rover car emblem features a Viking ship with red sails unfurled, symbolizing the company's fearless spirit of braving winds and waves and being invincible. Land Rover currently has three major product families: the Range Rover series, the Discovery series, and the Defender series. Representative models include: Range Rover Evoque 2021, a 5-door 5-seater SUV with body dimensions of 4531*1904*1650mm; Discovery 2022, a 5-door 7-seater SUV with body dimensions of 4956*2073*1888mm; Range Rover Velar 2022, a 5-door 5-seater SUV with body dimensions of 4811*1930*1684mm.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.