Where is the electronic parking brake control module located on the X-Trail?

1 Answers
MacAngela
07/29/25 6:36pm
The electronic parking brake control module of the X-Trail can be seen after lifting the chassis. Below is an introduction about the X-Trail: 1. Overview: The new X-Trail inherits the exterior design of its predecessor, with most lines following a square and powerful style. It features a newly developed Nissan intelligent 4WD system. This 4WD system has three modes: the 2WD mode can effectively reduce fuel consumption during daily driving. 2. Highlights: The X-Trail is equipped with an intelligent all-mode 4WD system, allowing drivers to freely choose between 2WD, automatic, or locked 4WD modes to handle various road conditions. 3. Exterior: The waistline running from the headlights to the taillights gives a smooth texture; the uniform gaps between interior and exterior components, along with the integrated tailgate trim, make the connection between the tailgate and rear bumper of the domestic X-Trail smoother, combining a sense of strength with elegance.
Was this review help?
8
0
Share
More Forum Discussions

How to adjust the time on a Peugeot 301?

Peugeot 301 time adjustment method: Start the engine, press and hold the small stick under the instrument panel for three seconds, the minutes will flash, then you can adjust the minutes. Press and hold for another three seconds, the hours will flash, then you can adjust the hours. More information about the Peugeot 301 is as follows: 1. The Dongfeng Peugeot 301 adopts a new family-style front face. The Peugeot 301 features a sedan design with a body length of 4440mm and a wheelbase of 2650mm. The overall design is compact, with a short and powerful rear styling. The trunk capacity is 506L. 2. Based on the trust of 12 million global users in the 3 Series, Dongfeng Peugeot 301 is meticulously crafted as a new-generation quality pioneer mid-size car, offering French elegant design with pure, smooth, and graceful design language.
14
2
Share

What does the M stand for in an automatic transmission car?

In an automatic transmission car, the M gear stands for manual mode. Only cars equipped with a manual mode in a semi-automatic transmission or a simulated manual mode in a CVT transmission have an M gear; regular automatic transmission cars do not have an M gear. Below are the usage methods for the M gear in an automatic transmission car: 1. The M gear in an automatic transmission is the manual mode, which can be engaged directly. Push up once to shift up a gear, pull down once to shift down a gear, and you can start in 2nd gear. 2. When in a high gear, releasing the throttle without pressing the brake will not downshift. If the speed is too low, it will automatically downshift to the appropriate gear. The transmission will not upshift on its own while driving.
6
4
Share

Is it necessary to use 95 octane gasoline for the Golf?

It is necessary to use 95 octane gasoline for the Golf. Here are some refueling precautions: 1. Choose to refuel when the temperature is relatively low; 2. If the car is not used for a long time or used infrequently, keep the fuel level low; 3. Avoid refueling when a tanker truck is unloading fuel; 4. Turn off the engine when refueling a gasoline-powered vehicle. Taking the 2021 Golf as an example, it belongs to the compact car category, with body dimensions of 4296mm in length, 1788mm in width, 1471mm in height, and a wheelbase of 2636mm. The 2021 Golf is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, a maximum torque of 200Nm, and is paired with a 7-speed dual-clutch transmission.
4
4
Share

Can Strong Magnets Repair Car Dents?

Strong magnets generally cannot repair car dents. Dent repair usually involves using tools to suction out the dented area with a suction cup, then inserting a hook behind the dented area to slowly push it out, and finally using a rubber hammer to smooth out the protruding parts. Car Dent Repair: In general, car dent repair can restore the original state for sharp-angle and obtuse-angle dents. Mainly, dents without paint damage can be fully repaired, hail dents can be repaired, while edges and AB pillars are difficult to restore. Traditional Sheet Metal Repair: Sheet metal repair involves fixing the deformed parts of the car's metal shell. For example, if the car body shell is dented, sheet metal work can restore it to its original shape. Then, by applying specialized paint, the deformed metal surface can be restored to match the undamaged areas, making it look as good as new.
2
2
Share

Can a Non-Independent Suspension Be Converted to an Independent Suspension?

A non-independent suspension can be converted to an independent suspension, but it is not recommended. Such an operation is equivalent to readjusting everything above the wheels, which is too demanding. If not adjusted properly, it can easily lead to safety issues. Here are explanations about non-independent and independent suspensions: 1. A non-independent suspension system connects the left and right wheels via a single axle (or structural component). Due to differences in suspension structure and the way it connects to the vehicle body, non-independent suspension systems come in various forms. 2. The advantages of an independent suspension include: lightweight, reducing the impact on the vehicle body and improving wheel traction; the use of softer springs with lower stiffness to enhance ride comfort; the ability to lower the engine position and the vehicle's center of gravity, thereby improving driving stability; and the fact that the left and right wheels move independently, minimizing body tilt and vibration. 3. However, independent suspension systems have drawbacks such as complex structure, high cost, and inconvenient maintenance. Additionally, their complex structure may encroach on some of the vehicle's interior space.
19
3
Share

How to Correctly Downshift a Manual Transmission Car?

Correct operation for downshifting a manual transmission car: 1. Before shifting, the clutch pedal must be fully depressed, and the gear lever should be operated swiftly, gently, and accurately. 2. When shifting while driving, it's important to choose the right moment. Before upshifting, you must first accelerate (rev up), and when the speed reaches the appropriate level for the higher gear, shift into the higher gear promptly. For downshifting, wait until the speed drops to a certain value before shifting into the lower gear. Under safe conditions and on good roads, try to use the highest gear suitable for the speed to reduce wear on mechanical parts and lower fuel consumption, and adjust the speed in time according to road and traffic conditions. 3. Always ensure the car is completely stopped before shifting into reverse gear. Similarly, after reversing, if you want to move forward, stop the car completely before shifting into a forward gear. 4. Keeping your hand on the gear lever for extended periods while driving can cause premature wear of the transmission shift fork, so after shifting, remove your right hand from the gear lever.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.