···
Log in / Register

Where is the electronic driver's license located in the 12123 app?

4 Answers
MacOmar
07/29/25 1:16pm

The electronic driver's license is located in the upper left corner of the 12123 app's homepage. On the driver's license interface, you can see the electronic driver's license and complete the operation of opening it. Below is relevant information about forgetting to bring your driver's license: 1. Save the electronic driver's license: Present the electronic driver's license on your phone. After verification, if it is genuine, you can avoid the fine for forgetting to bring your driver's license. 2. Legal penalties: Driving without a driver's license or vehicle registration certificate results in a one-point deduction and a fine. According to Article 95 of the 'Road Traffic Safety Law of the People's Republic of China,' motor vehicles driven on the road without displaying license plates, inspection qualification marks, insurance marks, or without carrying the vehicle registration certificate or driver's license will be detained by the traffic management department of the public security organ. The party involved will be notified to provide the corresponding certificates, marks, or complete the necessary procedures, and penalties may be imposed in accordance with Article 90 of this law.

Was this review help?
2
2
Share
Leanne
08/14/25 3:22am

I recently checked my electronic driver's license on the 12123 App, which is located on the homepage or under the 'Driver's License' tab in the bottom menu. Just tap in and you can see the electronic version directly, with the QR code and all details clearly displayed. As a long-time driver, I find it super convenient—no need to carry the physical card when going out, and even if I forget it, I don’t have to worry about traffic police checks since it’s recognized nationwide. The binding process is simple: just verify your identity in the personal center, and it will be automatically generated. For temporary inspections or parking payments, just open your phone and it’s done, saving the hassle of rummaging through your bag. Some cities even support quick violation handling via QR code scanning. The electronic version is safer than the paper one, as it’s less likely to be lost or damaged. I recommend new drivers set it up when downloading the App—developing this habit can help avoid a lot of trouble.

Was this review help?
18
5
Share
Expand All
PenelopeAnn
10/10/25 2:05am

Every time someone asks where the 12123 electronic driver's license is, I tell them to log in and click on the 'Driver's License Services' or 'Electronic Documents' section, which is usually prominently displayed on the homepage. The electronic driver's license is valid and convenient—just bring your phone when traveling or on road trips. Traffic police can quickly confirm your identity by scanning the QR code. Remember, the interface might slightly adjust after an app update, but the core path remains the same. If you can't find it, check the help menu. For someone like me who often drives long distances, it reduces the burden of carrying a physical card and provides peace of mind, especially during nighttime checks when poor lighting makes it easier to present. I recommend regularly checking if your electronic license is about to expire—the app will automatically remind you, which is quite hassle-free. By the way, regarding security, make sure to bind your vehicle information to ensure a match and prevent information leaks.

Was this review help?
15
3
Share
Expand All
DeRuby
11/23/25 3:16am

To find the electronic driver's license, go to the 'Driver's License' section in the 12123 App. It will be visible upon logging in. Click to open it on the main page to display complete information, and you can scan the QR code at checkpoints when going out. The electronic license is practical and lightweight, so you don't have to worry about forgetting your physical card. After binding your driver's license, the validity period is automatically updated, making it convenient and reliable. For some drivers, the app also includes navigation features, which can be used in combination for greater efficiency.

Was this review help?
18
3
Share
Expand All
More Forum Discussions

How many electric motors does the Ferrari SF90 have?

The Ferrari SF90 is equipped with three electric motors, distributed on both the front and rear axles, and utilizes a ternary lithium-ion battery. These three motors, combined with a 3.9T twin-turbocharged engine, deliver a combined power output of 735 kW and a combined torque of 900 Nm. The drivetrain features a mid-engine layout with all-wheel drive (AWD), specifically an electric all-wheel-drive system. The Ferrari SF90 is a sports car introduced by Ferrari, with dimensions of 4704 mm in length, 1973 mm in width, and 1191 mm in height, and a wheelbase of 2650 mm. Both front and rear brakes are ceramic ventilated discs, and the body structure is of a unibody design. The front tire specification is 255/35R20, while the rear tire specification is 315/30R20.
12
4
Share

Do You Need to Press the Accelerator When Reversing in an Automatic Transmission Car?

When reversing in an automatic transmission car, you generally do not need to press the accelerator. Simply shift into the R (Reverse) gear and release the brake, and the car will move backward automatically. However, in certain situations such as when on a slope or when the wheels are on a speed bump, the idle power of the engine may not be sufficient to overcome the resistance. In such cases, you may need to lightly press the accelerator to assist in reversing. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions. Typically, automatic transmission cars have six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
16
4
Share

Where is the tire pressure reset button on the Great Wall Pao?

The tire pressure reset button for the Great Wall Pao is the SET button on the central dashboard. Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing a tire pressure fault. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are required. Failure to reset the tire pressure monitoring: After inflating the tires, if the tire pressure is not reset promptly, the monitoring system will retain the previous data, causing the tire pressure warning light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new component.
13
5
Share

Can Green and Red Antifreeze Be Mixed?

Whether green and red antifreeze can be mixed depends on the brand and composition of the antifreeze. Antifreeze of different brands or compositions should not be mixed. This is because the production formulas of antifreeze from different brands may vary, and mixing them could lead to chemical reactions between various additives, rendering them ineffective. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. It also prevents the coolant from freezing and expanding in cold winters, which could otherwise crack the radiator or damage the engine cylinder block or head. The main components of antifreeze are: 50% pure water, 40% methanol, and 10% other substances. It is generally categorized into three types: ethanol-water, glycerol-water, and ethylene glycol-water.
18
1
Share

Is Braking Distance the Same as Stopping Distance?

Braking distance is indeed stopping distance, so the faster the vehicle speed, the longer the braking distance (stopping distance). Braking distance is one of the key parameters to measure a vehicle's braking performance, consisting of two parts: reaction distance and braking distance. Below are the relevant explanations: Reaction Distance: The distance traveled by the vehicle from the moment the driver notices a situation and intends to stop until the brake pedal is pressed and braking action begins is called reaction distance. Reaction distance depends on the driver's level of concentration, technical proficiency, and the vehicle's speed. Higher concentration and better technical skills result in a shorter reaction distance, while the opposite leads to a longer reaction distance; the faster the vehicle speed, the longer the reaction distance, and vice versa. Braking Distance: The distance traveled by the vehicle from the moment the driver presses the brake pedal and braking action begins until the vehicle comes to a complete stop is called braking distance. The length of the braking distance is related to the vehicle's speed, braking force, coefficient of friction, etc. The faster the speed, the longer the braking distance—for example, doubling the speed increases the braking distance by four times. The greater the braking force, the shorter the braking distance, and vice versa.
18
5
Share

Why is there a hump in the middle of the back row in some cars?

Some cars have a hump in the middle of the back row because: for the flatness of the chassis, as the car's underbody is equipped with an exhaust pipe or drive shaft, usually rear-wheel-drive cars must transmit the engine's power to the rear wheels through the drive shaft, so structurally, such a hump is necessary. The hump between the front and rear seats from front to back is a structural design intended to enhance the longitudinal rigidity of the cabin, while also providing space for the exhaust pipe to run backward without affecting the chassis's ground clearance. If the chassis were a flat steel plate, it would easily "fold" upon impact. However, if the chassis is designed with a semi-circular hump, its ability to withstand impact can be many times stronger than a flat steel plate, and it is less prone to deformation. This is similar to adding a steel beam to the chassis.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.