Where is the drainage hole location for the Focus car door?

2 Answers
OCharlotte
07/28/25 2:19pm
The drainage holes are all located at the bottom of the door. Below is relevant information about the Focus: 1. Introduction: The Changan Ford Focus was launched at the Guangzhou Auto Show on November 20, 2020. The Changan Ford Focus family released a total of eight models. The Ford Focus family is built on Ford's new mid-size car platform, combining Ford's strong R&D capabilities and the collective wisdom of the global engineering design team to set a new benchmark for driving pleasure in the mid-size car segment. 2. Performance: The Ford Focus is equipped with the "high-performance CP" combination of an EcoBoost180 turbocharged dual-injection engine and the only 8AT in its class, delivering a maximum power of 128Kw and a peak torque of 243N·m, with a 0-60Km/h acceleration time of just 4.5s.
Was this review help?
12
0
Share
VanJackson
08/11/25 10:28pm
I drove a Focus for several years and paid special attention to the location of the door drain holes. They are hidden in the gap at the very edge of the bottom of the door, specifically beneath the weatherstrip. You need to bend down and look closely at the bottom of the door frame, where several small holes are distributed. If not cleaned regularly, leaves or mud can block these holes, causing rainwater to accumulate inside the door, which can corrode the metal structure or damage the wiring. Once, I neglected to check, and water accumulated inside the door, leading to rust—repairs cost me quite a bit. Now, after every car wash, I use a small wire or toothpick to gently clear the holes. I recommend new owners develop this habit, especially during humid seasons. For specific Focus models, the holes might be slightly different in position—some years may have them in the middle or rear of the door—but the general location remains the same. Simple maintenance can significantly extend the door's lifespan.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What to Do When the Car Battery Is Dead and the Car Won't Start?

Here are the solutions for when the car won't start due to a dead battery: 1. Charge the battery. 2. Replace the car battery. 3. Push-start the car: When using this method, be sure to maintain a safe distance. 4. Jump-start the car: When connecting jumper cables, ensure the positive terminal is connected to positive and negative to negative. 5. Towing: Use another vehicle to tow-start the car. Below are the impacts of a dead car battery: 1. It shortens the battery's lifespan; 2. It prevents the car from starting and causes electrical devices inside the car to malfunction; 3. It may cause data loss in the vehicle's control modules during startup, leading to operational issues; 4. It can overheat the starter motor, reducing its lifespan; 5. Prolonged battery depletion can damage the alternator.
8
1
Share

How are car classes divided?

Sedans are classified into A00 class (micro cars), A0 class (subcompact cars), A class (compact cars), B class (mid-size cars), C class (executive cars), and D class (luxury cars). A00 class sedans have a wheelbase between 2 meters to 2.2 meters and an engine displacement of less than 1 liter; A0 class sedans have a wheelbase of 2.2 meters to 2.3 meters and a displacement of 1 liter to 1.3 liters; Generally, A class cars have a wheelbase ranging from about 2.3 meters to 2.45 meters and a displacement of about 1.3 liters to 1.6 liters; B class mid-range sedans have a wheelbase of about 2.45 meters to 2.6 meters and a displacement from 1.6 liters to 2.4 liters; C class premium sedans have a wheelbase of about 2.6 meters to 2.8 meters and an engine displacement of 2.3 liters to 3.0 liters; D class luxury sedans generally have a wheelbase greater than 2.8 meters and a displacement mostly above 3.0 liters. China's vehicle classification standards: The main categories of vehicles in China include trucks, off-road vehicles, dump trucks, tractors, special-purpose vehicles, buses, sedans, and semi-trailers. Trucks are mainly divided into micro trucks, light trucks, medium trucks, and heavy trucks; Off-road vehicles include light off-road vehicles, medium off-road vehicles, heavy off-road vehicles, and ultra-heavy off-road vehicles; Dump trucks include light dump trucks, medium dump trucks, heavy dump trucks, and mining dump trucks; Tractors include semi-trailer tractors and full-trailer tractors; Special-purpose vehicles include box trucks, tank trucks, crane trucks, van trucks, special structure vehicles, and specialized dump trucks.
16
2
Share

What documents are required for 2021 vehicle annual inspection?

For the 2021 vehicle annual inspection, you need to bring the original vehicle license, duplicate of compulsory traffic insurance, and a copy of your ID card. Notes for annual inspection: During the inspection, the vehicle management office will check the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the inspection. If the lights are too dim, check the lighting circuit and whether the bulbs are aged, replacing relevant parts if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the inspection to pass the test. Annual inspection procedure: First, after submitting the inspection application, an online inspection will be conducted. Drive the vehicle into the automatic inspection area to sequentially check whether the exhaust, speed, lights, side slip, and chassis meet the standards. All items must pass to proceed. Next is the appearance inspection, verifying the vehicle's license plate, type, body color, engine number, VIN code, and frame number for accuracy. Then inspect the body appearance, checking details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all items pass, you can proceed to pay the inspection fee and collect the vehicle license and certification label. If any items fail, the owner must repair them and participate in a re-inspection until all items pass before proceeding with the visa procedures.
9
5
Share

What Causes the Paint Surface to Appear Hazy and Dull After Polishing?

This layer of white haze may be caused by not promptly wiping off the polishing wax with a cloth after polishing. You can try using wax and a damp cloth to see if it can be wiped off. If that doesn't work, it is recommended to visit a 4S store for professional polishing by a technician. Here is some additional information: 1. Other causes of haze: The construction process and environment may have excessive humidity, or there may be moisture in the air compressor. If the environmental humidity is too high, a small amount (not exceeding 15%) of white water can be added for spraying. Ensure all moisture is drained from the compressor before spraying. The use of inappropriate thinners that evaporate too quickly can cause the surface temperature of the paint film to drop sharply, leading to moisture condensation on the film. 2. Prevention methods for whitening, hazing, and blurring after painting: Whenever possible, avoid painting in rainy, cold, or humid weather and allow the paint film to dry naturally. Otherwise, use a non-hazing thinner. Use high-quality thinners or thinners of the appropriate grade. Reduce the pressure of the compressed air to minimize the cooling effect, ensure proper ventilation and heating in the painting room, and avoid drafts.
14
4
Share

Is It Serious If a Car Is Flooded Up to the Foot Mats?

If the car is flooded up to the foot mats, it is quite serious. It is recommended that the owner take the car to a professional auto repair shop for thorough cleaning and drying. The following two flood heights can help determine whether the car can continue to be driven: 1. Exhaust Pipe Height: Many car owners worry that water reaching the exhaust pipe will backflow. In fact, the pressure generated by the engine during exhaust is very high, enough to expel any water that backflows into the exhaust pipe. Therefore, as long as the car does not stall and maintains sufficient and stable power, it can prevent water from backflowing into the exhaust pipe and safely pass through flooded areas. 2. Half-Wheel Height: Cars are equipped with various electronic components and sensors. If water enters the interior, it is highly likely to damage these electronic components or sensors.
2
0
Share

What is the difference between an intercooler and a radiator?

The differences between an intercooler and a radiator are as follows: 1. Essential difference: The intercooler is actually an accessory for turbocharging, whose function is to reduce the temperature of the high-temperature air after pressurization, thereby reducing the thermal load on the engine, increasing the intake volume, and consequently enhancing the engine's power. For turbocharged engines, the intercooler is a crucial component of the turbocharging system. The radiator, on the other hand, is an important component in hot water (or steam) heating systems. 2. Different classifications: Intercoolers are generally made of aluminum alloy materials. Depending on the cooling medium, common intercoolers can be divided into two types: air-cooled and water-cooled. Radiators are classified by heat exchange method into radiant radiators and convective radiators.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.