Where is the drainage hole located on the Touran?

1 Answers
GrahamMarie
07/29/25 5:56am
The drainage hole in the Touran's engine compartment is generally located at the junction between the windshield and the hood. Below are the specific details: 1. Drainage outlets: The main drainage holes in a vehicle include the engine compartment drainage hole, air conditioning drainage hole, door drainage hole, sunroof drainage hole, fuel tank cap drainage hole, and trunk drainage hole. 2. Engine compartment drainage hole: This is the most prone to clogging. Water flowing down from the windshield exits through this location, and debris such as leaves can easily accumulate here. If the engine compartment drainage hole gets clogged, it not only affects drainage but can also breed bacteria. Additionally, since the engine compartment drainage hole is relatively close to the air conditioning intake, it may directly impact the air quality inside the vehicle.
Was this review help?
8
4
Share
More Forum Discussions

What is the ground clearance of a typical sedan?

Generally speaking, the minimum ground clearance of a sedan ranges between 110mm and 130mm. For sedans, a larger ground clearance (exceeding 130mm) provides relatively better off-road performance but poorer high-speed stability; conversely, a smaller ground clearance (below 110mm) offers better high-speed stability but poorer off-road capability. If you frequently drive on mountain roads, it is advisable to choose a vehicle with higher ground clearance. If you mainly drive on urban roads or highways, a vehicle with lower ground clearance is sufficient. Additional Information: 1. The lowest ground clearance of most sedans is only about a dozen centimeters, which refers to the distance between the lowest part of the vehicle and the ground (usually near the suspension close to the tires). Other parts of the vehicle are positioned much higher. Therefore, when driving through rough or uneven terrain, it is important to choose your path carefully. Even when passing through low-lying areas, as long as the area near the tires is not at the lowest point of the depression, the chassis will not scrape. 2. The value of the minimum ground clearance has certain limitations and is related to the vehicle's function and aerodynamics. Arbitrarily increasing or decreasing the minimum ground clearance without considering the vehicle type can affect the car's performance and make the overall appearance look uncoordinated and awkward. The ground clearance of a car is not a fixed value; it depends on the load condition. Therefore, determining the ground clearance also depends on the changes in load, and the maximum load variation should be considered when setting the ground clearance.
6
1
Share

How often should the car air conditioning filter be cleaned?

It is recommended to clean the car air conditioning filter once a month. Regular cleaning can extend its service life. Below are the specific steps for cleaning the car air conditioning filter: 1. Purchase an air conditioning cleaner and prepare a cloth. 2. Remove the air conditioning filter. 3. Clean the air conditioning filter. 4. Lower the car windows, turn on the air conditioning, and increase the airflow. 5. Activate the external circulation mode. 6. Turn on the AC switch and let the air conditioning system run for about 10 minutes. 7. Reinstall the air conditioning filter. Note: If the air conditioning is used infrequently and the usage environment is good, as long as the surface of the air filter does not show severe discoloration (grayish-brown), you can remove the air filter and expose it to sunlight for 2 hours.
1
0
Share

What does an exclamation mark on the dashboard mean?

There are five possible scenarios when an exclamation mark appears on the car dashboard: general fault, automatic transmission fault, brake system fault, abnormal tire pressure, and lighting fault. Below is a detailed analysis of these five situations: General Fault: A triangle with an exclamation mark inside indicates that the car's general performance or components and functions have malfunctioned. This mainly includes parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricant is below the normal range. The transmission oil should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal Tire Pressure: An exclamation mark with a horizontal line below the parentheses represents the tire pressure monitoring warning light. This light will illuminate when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating that a car light has malfunctioned. Solution: Go to a 4S shop for inspection and repair as soon as possible, or you can check it yourself. Focus on commonly used bulbs such as turn signals, fog lights, and interior lighting to see where the problem lies.
4
2
Share

Will Adhesive Remover Damage Car Paint?

Regarding whether adhesive remover will damage car paint, if it is applied for a short time, it will not harm the paint. However, if left on for too long, it can soften the paint, making it easy to scrape off with a fingernail. It is recommended to apply adhesive remover for no more than one minute, ideally around 30 seconds. Here are some car paint maintenance tips: 1. Do not wash your car too frequently. Generally, once a month is optimal. Frequent washing can cause the cleaning cloth to rub against the paint, leading to damage over time. If the car only has dust or similar dirt, washing is unnecessary. 2. Address paint scratches promptly. Over time, small rust spots can form, and if left untreated, rust can spread. In severe cases, it may damage the primer. 3. Avoid parking outdoors for extended periods. If long-term parking is unavoidable, consider using a car cover to protect the vehicle.
11
4
Share

Specific Steps for Evacuating Automotive Air Conditioning System

Below are the specific steps for evacuating an automotive air conditioning system: 1. Connect the high and low-pressure hoses to the compressor's high and low ports respectively, with the middle hose connected to the vacuum pump. 2. Open the high and low-pressure manual valves and start the vacuum pump. 3. Close the high and low-pressure manual valves and observe whether the pressure gauge reading has rebounded. 4. Turn off both the high/low-pressure manual valves and the vacuum pump. Important Notes: 1. Before servicing the AC system, it's essential to remove air and moisture to reduce water content in the system, facilitating fault diagnosis and repair. 2. Creating a vacuum inside the system lowers water's boiling point, allowing moisture to vaporize and be more easily extracted from the AC system.
1
2
Share

Can I Transfer to Another Driving School After Enrollment?

No, you generally cannot transfer to another driving school. You can only cancel the exam and re-enroll for training. However, you may change driving schools if the need arises due to issues caused by the driving school. Example: A student who couldn't take the Theory Test (Subject 1) after two months of enrollment due to the school's fault. In such cases, you can report to the traffic management department or relevant authorities to protect your legal rights. Additional Information: 1. After completing Subject 1, if you want to change driving schools due to the school's issues. Since it's the driving school's fault, the student can negotiate with the school. If negotiations fail, you may contact other relevant authorities for mediation. 2. After completing Subject 1, if you want to change driving schools for personal reasons. The difference between these two scenarios lies in whether the request to change schools is made before or after Subject 1. The solution is to negotiate with the driving school. 3. After enrolling in driving school, if you need to change schools due to personal reasons preventing you from attending. Once you've enrolled, you cannot change driving schools. This is because after enrollment, your information is registered in the vehicle management office's exam system under that school in the national network. While instructors can be changed, the school cannot.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.