Where is the dot on the wiper?
3 Answers
The raised dot on the wiper is located at the connection point between the wiper arm and the wiper blade. Below is an introduction to the usage and functions of the wiper: How to use the wiper: Locate the wiper control lever on the lower left side of the steering wheel; push the wiper lever upward one notch to activate the wiper; to turn off the wiper, push the lever downward to the 'off' position. Functions of the wiper: Remove raindrops and dust attached to the vehicle's windshield; improve the driver's visibility; enhance driving safety. The method for replacing the wiper is as follows: lift the wiper up; press the clip below to remove the wiper rubber strip; take off the old wiper; lift the front end of the middle clip; insert the new wiper into the middle clip, pull it tight by hand, and the replacement is complete once you hear a clicking sound.
The dot on the wiper is usually located at the top of the wiper arm or at the arm connection point, featuring a small mark or raised area to help you correctly install new wiper blades. When installing, align this dot with the reference position on the wiper arm to ensure the wiper operates straight without hitting the windshield edges or skipping around, which could obstruct your view. The first time I replaced mine, I didn't align the dot properly, causing the wiper blade to scrape chaotically, making loud noises and nearly damaging the glass. Since then, I always double-check the alignment. It's advisable to replace wiper blades regularly, ideally every six months, especially before the rainy season—check both the dot alignment and overall condition to ensure safe driving with a clear view. When choosing wiper blades, don't just go for the cheapest option; higher-quality ones last longer and work more efficiently when the dot is properly aligned.
There is often a small dot designed at the top or connection point of the wiper arm, which serves as an installation marker for quickly aligning the wiper blade position. When replacing the blade, align the dot and snap it in, ensuring the wiper is correctly fixed at the optimal angle to cover the entire windshield. Misalignment may lead to ineffective wiping or damage, posing driving hazards and incurring additional repair costs. Before operation, remember to clean the arm base and apply silicone-based lubricant to reduce friction and extend lifespan. During each maintenance, check if the marker dot is clear and clean any stains on the windshield to maintain visibility.
