Where is the door drain located?

1 Answers
DeAdaline
07/30/25 10:47am
The door drain is located at the lower part of the door panel, with at least two drains per door. The function of the door drain is to discharge water from inside the door during rain. The door consists of the door body, door accessories, and interior trim panel. Its functions are to provide access for the driver and passengers, isolate external disturbances, and to some extent, mitigate side impacts to protect occupants. Other drainage holes in the car are categorized by their locations: 1. Air conditioning drain hole; 2. Engine compartment drain hole; 3. Sunroof drain hole; 4. Fuel tank cap drain hole; 5. Trunk drain hole; 6. Rocker panel drain hole.
Was this review help?
5
0
Share
More Forum Discussions

Does the Lavida belong to the B-segment car category?

The Lavida does not belong to the B-segment car category; it is classified as an A-segment car. Generally, car classifications are divided into six levels: A00, A0, A, B, C, and D, corresponding to micro cars, subcompact cars, compact cars, midsize cars, full-size cars, and luxury cars, respectively. The classification of car segments depends on multiple factors, such as the vehicle platform, wheelbase, body dimensions, vehicle configurations, and powertrain, rather than being determined by a single parameter. The Lavida is positioned as a compact car, available in both hatchback and sedan body styles. In terms of powertrain, it is equipped with three engine options: 1.2T, 1.4T, and 1.5L, paired with manual, automatic, and dual-clutch transmissions.
3
2
Share

How to Pass Vehicle Inspection with an Electronic Insurance Policy?

Methods for passing vehicle inspection with an electronic insurance policy: Print out the electronic insurance policy and follow the procedures to obtain the inspection sticker. The process for obtaining the inspection sticker: 1. If the vehicle is eligible for the six-year exemption from inspection, the vehicle does not need to be driven over. Simply bring the vehicle registration certificate, the ID card of the person named on the registration, and a copy of the valid compulsory insurance policy; 2. Check the traffic management website to see if there are any traffic violations. If there are, they must be resolved before proceeding with the inspection; 3. Upon arriving at the service window, pay the fee and obtain the inspection application form. Fill in the circled sections with the information from the vehicle registration certificate; 4. After filling out the form, submit the copy of the valid compulsory insurance policy, ID card, and vehicle registration certificate to the staff; 5. The staff will review the documents. If all documents are complete and there are no unresolved violations, they will print the inspection sticker for the owner and also note the expiration date of the current inspection on the duplicate of the driving license.
12
4
Share

What are the reasons for the brake light to come on?

Reasons for the brake light to come on include insufficient brake fluid, damaged tail light bulb, and the need to replace brake pads in time. Insufficient brake fluid: Brake fluid is an indispensable part of the automotive braking system. When the driver steps on the brake pedal, the force applied is transmitted by the piston in the master cylinder through the brake fluid to the wheel cylinders located at each wheel, causing the brake pads to contact the wheels and stop the vehicle. If the brake fluid is insufficient, the braking power of the car may be inadequate, potentially leading to failure to brake, and the brake light will come on. Damaged tail light bulb: The brake fluid reservoir has upper and lower lines. When the brake fluid level drops below the lower line, it is detected by the sensor next to the reservoir and reflected by the brake light on the dashboard. If the tail light bulb is damaged, it may indicate a brake fluid leak, causing the brake light to come on. Brake pads need timely replacement: When the brake pads need to be replaced, the brake light will come on to alert the owner to replace the brake pads promptly.
18
4
Share

Why is the vehicle's warning light constantly on?

Automotive safety indicator lights require identification of the specific light type. If it's the red light in the upper left corner, it indicates an oil pressure warning, signaling insufficient engine oil. The orange light at the bottom typically represents an engine malfunction indicator. The top right light is the seatbelt warning, alerting when passengers aren't buckled up, while the bottom right indicates battery issues requiring inspection. Safety indicator troubleshooting methods: Different warning lights require distinct approaches. For low oil pressure, use the dipstick to check levels - if below the 'min' mark, simply add oil. However, if oil consumption is abnormally high within short driving intervals, verify oil authenticity and replace with quality lubricants if counterfeit is suspected. Dashboard warning light explanation: When dashboard warning lights illuminate during operation, immediate diagnosis at authorized service centers is crucial. Certain critical warnings mandate stopping the vehicle immediately to prevent potential severe accidents.
10
1
Share

What does supercar mean?

Supercar is short for super sports car, which mainly refers to sports cars with high-power output and outstanding appearance, with a maximum speed of over 300km/h. Basic characteristics of supercars: Supercars are sports cars with mid-engine layout, high price and excellent performance. Due to the mid-engine layout, most supercars are two-seaters; some supercars also have eye-catching designs such as scissor doors, gull-wing doors, and butterfly doors. Supercars usually launch some racing versions and limited editions, which are rarer and more expensive than standard versions. Representative models: Famous supercars include Ferrari LaFerrari, Ferrari Enzo, Lamborghini Veneno, Lamborghini Reventon, McLaren F1, McLaren P1, Bugatti Veyron, Pagani Zonda, Pagani Huayra, Koenigsegg Agera, Koenigsegg CCXR, Porsche 918 Spyder, Maserati MC12, Aston Martin Vulcan, Honda NSX, etc.
16
5
Share

What Kind of Towel is Best for Washing a Car?

Suitable towels for washing a car include microfiber towels, faux suede towels, and chamois. Microfiber towels: Made from ultra-fine and resilient synthetic fibers, they have a strong structure and are soft yet durable. They do not damage the surface being cleaned and have low dust and ion content. Compared to regular cotton towels, microfiber towels have superior water absorption and minimal linting or fading. Faux suede towels: These towels mimic the soft texture of suede and are made from PVA material. They feature a smooth and fine surface, strong wrinkle resistance, excellent water absorption, easy washing, durability, and remain flexible even at low temperatures. Chamois: Chamois is made from the skin of wild chamois animals. It has a rugged texture with fewer surface imperfections compared to sheepskin, denser connective tissue, no linting, does not trap fine particles, and has excellent water absorption. It is soft, smooth, and does not damage the paint, making it highly suitable for car washing.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.