Where is the Dongfeng Honda factory located?

How to reset the maintenance light on Geely Borui?

Methods to reset the maintenance light on Geely Borui: 1. With the engine turned off, press and hold the short-distance counter reset button below the tachometer. Turn the ignition switch to the ON position, then release the short-distance counter reset button. The "SERVICE" indicator will appear on the display. 2. Pull out the minute button on the clock and turn it to the right. The mileage will be displayed. Turn off the engine to reset the reminder. Turn the ignition switch to the ON position again, and the "SERVICE" indicator will disappear. If manual reset fails, visit a maintenance facility to reset the maintenance light using professional diagnostic equipment.

13

5

Share

Is it a big deal to buy a 6-month-old stock car?

A 6-month-old stock car depends on the situation. If the car is in good condition, it can be acceptable. Generally, a 6-month-old stock car will be 5%-10% cheaper than a brand-new car. Differences between stock cars and new cars: 1. After leaving the factory, various fluids, electronic components, batteries, rubber seals, and tires of a new car may deteriorate due to prolonged storage without periodic inspection and maintenance, leading to moisture damage and aging. 2. Only a very few dealers perform periodic inspection and maintenance measures. The cost is not high, but it consumes manpower and time. Some 4S stores even have open-air garages, exposing new cars directly to scorching sun, wind, and rain. 3. For stock cars stored for too long, without proper warehouse management, the aging of electronic components and rubber products is almost undetectable. Professional testing equipment is required, and many stock cars may also suffer from insufficient oil or battery power.

4

0

Share

What brand is the audio system in the Emgrand GL?

The premium audio speakers in the Emgrand GL are manufactured by the domestic brand YinDi. Below are some key features of the Emgrand GL: 1. The Emgrand GL adopts Geely's new black logo, maintaining the overall design language of the Geely family while optimizing and upgrading details. The vertical waterfall-style water ripple grille integrates with LED headlights, and the swordfish-inspired chrome trim spans the lower grille, giving the vehicle a three-dimensional and fashionable appearance. 2. The Emgrand GL features an all-black interior theme. The newly designed NAPPA leather multifunction steering wheel is embedded with the updated brand logo. It also comes equipped with an 8-inch HD touchscreen, full-color LCD instrument cluster, 6-way electrically adjustable leather seats, and other premium configurations.

11

5

Share

What does a bulb with an exclamation mark on the car dashboard indicate?

Yellow bulb with an exclamation mark is the lighting fault indicator, indicating a malfunction in the vehicle's lighting system. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. The exclamation mark is a common fault indicator in vehicles. Besides the yellow bulb with an exclamation mark, there are four other forms of exclamation mark indicators: an exclamation mark inside a triangle, an exclamation mark inside a yellow gear, an exclamation mark inside a bracketed circle, and an exclamation mark inside a bracket with a horizontal line below. Here’s a detailed analysis: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a malfunction in the vehicle's general performance or components and functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. A visit to a 4S shop is necessary to diagnose and fix the problem. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a transmission malfunction or transmission fluid level below the normal range. Transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a bracketed circle. This represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Anomaly: An exclamation mark inside a bracket with a horizontal line below. This is the tire pressure monitoring warning light, which illuminates when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range.

19

3

Share

What Causes the Sunroof to Make Strange Noises?

Reasons and solutions for sunroof strange noises: 1. Aging of sunroof rubber seals or gaskets: Sunroof sealing strips are constantly exposed to rain or sunlight, making them prone to aging. Rubber conditioner can temporarily restore the performance of the seals, but the direct solution is to replace the sunroof rubber strips. 2. Loose sunroof screws: Loose screws can cause noises from the roof lining and the sunroof, and may even pose a risk of the sunroof falling off. The solution is simple: locate the sunroof screws and tighten them. 3. Dust particles in the sunroof tracks: Repeated opening and closing of the sunroof inevitably leads to dust accumulation in the track gaps. When enough dust builds up, friction occurs during sunroof operation, resulting in strange noises. You can remove the dust with a cloth.

18

0

Share

How to Park an Automatic Transmission Car on a Slope?

Automatic transmission cars can be parked on a slope by using the following two gears: 1. D Gear: Since some automatic transmission cars come with hill-start assist, when in D gear, you need to master the throttle and coordinate with the brake to achieve a smooth start on a steep slope. 2. On steep slopes, it is recommended to use the manual mode, specifically the S+ gear in the S mode. This gear is the lowest in manual mode, providing the highest torque and force, and when coordinated with the brake, it can help complete the hill start. Here is some related information about automatic transmission cars: 1. Generally, automatic transmission cars have P gear (Park), R gear (Reverse), N gear (Neutral), and D gear (Drive). It's important to use these gears properly to save fuel more efficiently. 2. When using D gear to climb a slope, if pressing the accelerator doesn't provide the same strong power as on flat roads, you should immediately switch to a low-speed gear with high torque for climbing. This not only saves fuel but also reduces engine wear. When encountering an uphill on city roads, avoid suddenly accelerating. Instead, accelerate before the slope to gain speed.

7

0

Share

Where is the Dongfeng Honda factory located?

How to reset the maintenance light on Geely Borui?

Is it a big deal to buy a 6-month-old stock car?

What brand is the audio system in the Emgrand GL?

What does a bulb with an exclamation mark on the car dashboard indicate?

What Causes the Sunroof to Make Strange Noises?

How to Park an Automatic Transmission Car on a Slope?

Which Year's Vehicles Are Considered China III Standards?

How to Adjust High Beam and Low Beam?

Does the Ford Mondeo Have a Panoramic Sunroof?

What kind of oil does Emgrand use?