Where is the diagnostic port located on the Peugeot 2008?

How to Open the Hood of a Leiling?

First, locate the hood release lever on the left side of the driver's compartment near the door pillar. Pull it, and you will hear a click from the front. Then, go to the front of the car where you will see a gap of about 1cm between the hood and the body. With one hand lifting the hood, use the other hand to reach in from the top of the grille and pull the hood release latch. Then, push the hood up and secure it with the support rod. Below are the functions of the car hood: 1. Airflow guidance: For objects moving at high speed in the air, the air resistance and turbulence generated around the moving object directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and reduce the resistance force, minimizing the impact of airflow on the car. 2. Protection of the engine and surrounding components: Under the hood are critical parts of the car, including the engine, electrical circuits, fuel lines, braking system, and transmission system.

17

0

Share

How many kilometers should the timing belt of a Volkswagen be replaced?

Volkswagen timing belts should be replaced every 60,000 to 80,000 kilometers. The timing belt, also known as the timing belt, is an important component of the engine's valve train. It connects the camshaft timing pulley at the top of the cylinder head to the crankshaft timing pulley at the bottom. The timing belt is a crucial part of the engine's valve system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific transmission ratio. Taking the Volkswagen Tayron as an example, it is a mid-size SUV with dimensions of 4589mm in length, 1860mm in width, and 1660mm in height, and a wheelbase of 2731mm. In terms of suspension, the Volkswagen Tayron features a MacPherson strut front suspension and a multi-link rear suspension.

5

Share

At what temperature does the Geely Emgrand thermostat open?

Geely Emgrand thermostat opens at 85 to 90 degrees. The thermostat is a valve that controls the flow path of the coolant, serving as an automatic temperature-regulating device. It typically contains a temperature-sensing component that opens or closes the flow of air, gas, or liquid through thermal expansion or contraction. The Geely Emgrand is a compact car with dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm. It features a MacPherson strut front suspension and a torsion beam rear suspension. The car is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80kW and a maximum torque of 142Nm, paired with a 5-speed manual transmission.

12

0

Share

Where is the fuel filter of the Magotan located?

The fuel filter of the Magotan is located inside the fuel tank, together with the fuel pump. The function of the fuel filter is to remove harmful particles and moisture from the engine fuel system, protecting the fuel pump, injectors, cylinder liners, and piston rings from excessive wear and clogging. It filters out iron oxide, dust, and other solid impurities contained in the fuel, reducing mechanical wear and ensuring stable engine operation. The Magotan has a length of 4865mm, a width of 1832mm, and a height of 1471mm, with a wheelbase of 2871mm. In terms of power, the Magotan is equipped with a 1.4T turbocharged engine, delivering a maximum torque of 250Nm and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.

8

2

Share

What Causes Car Wipers to Stop Working?

When car wipers stop working, it indicates a malfunction. You can try opening the hood to check if the transmission linkage is dislocated or inspect whether the fuse is intact. For more professional diagnosis, you can disconnect the motor wire plug, turn on the power, and use a multimeter to measure if there is voltage. If the fuse is intact but there's no voltage at the motor, check the wiring and the turn signal combination switch. If normal voltage is detected at the wiper motor when the power is on, the motor may be faulty. When car wipers fail to move, you can check the following possible causes: 1. Open the hood to check if the transmission linkage is dislocated (this is the most common cause). 2. Check if the fuse is intact. 3. Disconnect the motor wire plug, turn on the power, and use a multimeter to measure if there is voltage. If the fuse is intact but there's no voltage at the motor, check the wiring and the turn signal combination switch. 4. Check if the motor is burnt out—a burnt motor usually emits a scorched smell. If normal voltage is detected at the wiper motor when the power is on, the motor may be faulty.

20

3

Share

How to Remove the Rear Seat of a Santana?

The method to remove the rear seat of a Santana is as follows: First, detach the right-side fixing buckle of the rear seat, then remove the left-side fixing buckle, followed by separating the rear seat safety belt buckle, and the rear seat can then be removed. The Santana has dimensions of 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm, a fuel tank capacity of 52.8 liters, and a body structure of a 4-door, 5-seat sedan. In terms of power, the Santana is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 82kW and a maximum torque of 145Nm, paired with a 5-speed manual transmission.

9

2

Share

Where is the diagnostic port located on the Peugeot 2008?

How to Open the Hood of a Leiling?

How many kilometers should the timing belt of a Volkswagen be replaced?

At what temperature does the Geely Emgrand thermostat open?

Where is the fuel filter of the Magotan located?

What Causes Car Wipers to Stop Working?

How to Remove the Rear Seat of a Santana?

How to Repair Cracked Car Glass?

What to Do When the Car Key Won't Open the Door?

What kind of tires does the Haval H6 use?

Is It Okay to Buy a Car That Has Been in Inventory for 6 Months?