Where is the diagnostic port located on the Citroën C4L?

What does the PCS pre-collision system mean?

PCS (Pre-Collision System) is a system that can automatically detect obstacles ahead, calculate the possibility of a collision, and if the system determines that a collision is highly likely, it will sound an alarm to alert the driver. It is also known as the Pre-Safe Protection System. The pre-collision safety system can also help avoid collisions as much as possible by automatically adjusting the pre-collision brake assist system, emergency steering assist system, and vehicle dynamic integrated management system. The working principle of the pre-collision safety system is as follows: 1. After starting the vehicle, PCS automatically activates, and the radar continuously detects obstacles ahead. When the system detects an obstacle within a safe distance and determines that a collision may occur, it will sound an audible alarm and tighten the front seat belts; 2. If the driver does not respond after the warning and the system determines that a collision is unavoidable, it will apply appropriate braking to minimize the damage from the collision.

3

2

Share

What does it mean when the AFS warning light is on?

AFS warning light being on indicates that the adaptive cruise headlights are turned off. If it's not manually turned off by the driver, then it means there's a malfunction in the adaptive cruise headlights, and the specific cause should be checked promptly. The adaptive cruise system is an intelligent automatic control system primarily used to maintain distance from the vehicle ahead and adjust the car's speed during long-distance driving, thereby reducing driver fatigue. Precautions when using the adaptive cruise system include: 1. Avoid using it in rain, snow, fog, or poor road conditions to prevent safety hazards; 2. Regularly inspect the vehicle's sensing radar and cameras to prevent malfunctions that could render the adaptive cruise system ineffective.

9

2

Share

What Does Auto Hold Mean?

Auto Hold refers to an automatic braking function. After activating this feature, there's no need to pull the handbrake when stopping at traffic lights, simplifying operations by avoiding the use of manual or electronic handbrakes. For automatic transmission models, it also eliminates the frequent switching between D to N or D to P gears. The auto brake function is an extension of the vehicle stability control system, which controls the four-wheel braking through ESP. During this process, the ECU computer uses sensors installed on the vehicle to monitor the vehicle's level and wheel torque, determining whether braking is necessary to prevent rolling. The braking force applied to the wheels is minimal, just enough to stop the vehicle from moving, ensuring that when the accelerator is pressed again to move forward, there won't be a severe jerking motion.

10

2

Share

What is Parking Assist?

Parking assist refers to a system that includes ultrasonic sensors embedded in the front and rear bumpers. Each sensor has a diameter of approximately 15mm. The ultrasonic detection signals emitted by the sensors reflect when encountering obstacles. Upon receiving the reflected signals, the sensors promptly relay them to the system for distance calculation, alerting the driver through sound or video about the distance between the vehicle and obstacles outside their field of view. Reasons why the parking assist system may stop functioning include: 1. Use of a temporary spare tire; 2. Damage to the sensors or bumper; 3. Obstruction of the sensors by components installed on the vehicle; 4. The vehicle being used to transport loads exceeding its capacity.

4

1

Share

Is the Zotye T500 compliant with China VI emission standards?

Zotye T500 is not compliant with China VI emission standards, it is a compact SUV. Taking the 2018 Zotye T500 as an example, its body dimensions are: length 4632mm, width 1850mm, height 1695mm, wheelbase 2700mm, fuel tank capacity 55L, and curb weight 1427kg. The 2018 Zotye T500 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 151Nm, and is paired with a 5-speed manual transmission.

11

1

Share

Will an automatic car move when the brake is released?

An automatic car will move when the brake is released. When starting, to prevent the vehicle from lurching forward, it is essential to press the brake and shift gears. Introduction to automatic transmission gears: 1. P gear is the parking gear, used for long-term parking of the vehicle; 2. R gear is the reverse gear, engaged when the vehicle needs to move backward; 3. N gear is the neutral gear, engaged when the vehicle is parked for a short time without turning off the engine; 4. D gear is the drive gear, when the gear lever is placed in D gear, the vehicle will automatically shift gears based on throttle opening and speed data; 5. S gear is the sport mode, making the vehicle drive more sportily; 6. M gear refers to the manual mode, when the gear lever is shifted into M gear, gear shifting is done manually by the driver; 7. L gear is the low gear.

15

1

Share

Where is the diagnostic port located on the Citroën C4L?

What does the PCS pre-collision system mean?

What does it mean when the AFS warning light is on?

What Does Auto Hold Mean?

What is Parking Assist?

Is the Zotye T500 compliant with China VI emission standards?

Will an automatic car move when the brake is released?

Can a Car Designed for 92 Octane Use 95 Octane Fuel?

Is V6 a Six-Cylinder Engine?

What is the fuel tank capacity of the Mercedes-Benz E300 in liters?

How to Set Auto Window Roll-up on Boyue?