···
Log in / Register

Where is the daytime running light fuse of Haval H5?

4 Answers
DeElias
07/30/25 12:25am

Haval H5 has two fuse locations: one is located on the side of the glove box on the passenger side, and the other is integrated into the body control module. Method for replacing the light fuse: The fuse box in the cabin is generally located on the side of the dashboard near the door or under the steering wheel. The fuse box in the engine compartment is usually at the edge of the vehicle's engine compartment. With the specific location diagram of the fuse you are looking for, you can refer to the legend to find the actual position of the fuse in the vehicle. Function of the light fuse: Known as a current fuse, it is an electrical component installed in a circuit to ensure safe operation. Also referred to as a fuse, the IEC127 standard defines it as a 'fuse-link'. The fuse will melt and cut off the current when the current abnormally rises to a certain level and reaches a certain temperature, thereby protecting the safe operation of the circuit.

Was this review help?
6
0
Share
PaisleeMarie
08/16/25 4:57am

I've been working with cars for years and know that the daytime running light (DRL) fuse for the Haval H5 is usually located in the fuse box at the lower left corner of the dashboard next to the driver's seat. You'll need to crouch down and look underneath—open that small plastic cover, and you'll find a bunch of labeled fuses. Look for the one marked 'DRL' or 'Daytime Running Lights.' If it's blown, the lights won't turn on, which is often caused by a short circuit or voltage fluctuation. I recommend pulling it out first to check if it's burnt—if you have a spare, you can replace it yourself to save money and hassle. Never mess around in the engine bay; that's mainly for engine-related fuses. Always be cautious when driving, especially at night—lights not working can be dangerous and lead to accidents. Make it a habit to check the fuse box regularly to prevent sudden failures. By the way, Haval models generally have similar layouts, so older H5s follow the same setup—once you locate it, it's an easy fix.

Was this review help?
9
0
Share
Expand All
McAndres
10/19/25 7:50am

As a young driver, I was in a panic a few days ago when my daytime running lights went out. I searched online frantically and found out that the fuse for the Haval H5 is located in the fuse box in the engine compartment, specifically near the battery on the left front side. Open the hood and look for a small black square box—inside, there's a label indicating the fuse for the daytime running lights. If you're replacing it yourself, it's safer to wear gloves, and the tools are easy to find. But honestly, these fuses tend to fail due to moisture or rough driving, and replacements are cheap. I’d recommend just going to the 4S shop—they can professionally test the voltage and wiring to prevent accidents. I once tried DIY and ended up messing up other fuses, wasting a trip to the repair shop. Now, I always keep a few spare fuses in my car for emergencies—safety should always come first.

Was this review help?
4
1
Share
Expand All
Alana
12/02/25 8:29am

From a car enthusiast's perspective, the daytime running light fuse of the Haval H5 is located in the fuse box under the driver's seat, with its position accurately labeled. The principle is to prevent current overload. If the light doesn't work, it might be due to a blown fuse or circuit issues. Simply pull it out and replace it with a new one—it's not complicated. I also enjoy studying how this component interacts with the vehicle's lighting system, such as checking if the relay is functioning properly. Haval's design reliability is commendable. Regular maintenance is key to avoid long-term vibration wear on the fuse. Remember not to confuse its location with other models; using the specific fuse for this vehicle ensures stability.

Was this review help?
3
2
Share
Expand All
More Forum Discussions

What is the ground clearance of the Senova X35?

The ground clearance of the Senova X35 is 170mm. The Senova X35 is a compact SUV launched by BAIC Motor. The minimum ground clearance of a vehicle refers to the height of the chassis, specifically the minimum distance between the bottom of the vehicle and the level ground under maximum load conditions. The minimum ground clearance directly affects the vehicle's off-road capability. The dimensions of the Senova X35 are 4300mm in length, 1815mm in width, and 1640mm in height, with a wheelbase of 2570mm. The Senova X35 is equipped with a fuel-efficient 1.5L naturally aspirated engine, delivering a maximum power output of 85kw and a peak torque of 148nm.
15
2
Share

Should You Pull the Clutch When Going Downhill on a Motorcycle?

When going downhill on a motorcycle, you should not pull the clutch. Depending on the steepness and length of the slope, use the appropriate gear and speed, making full use of engine braking while also using the foot brake to control the speed. Pulling the clutch at this time will cause the bike to coast freely. The clutch should only be used when shifting gears or stopping. Avoid coasting in neutral and instead combine engine braking with the brakes to achieve early deceleration. A motorcycle consists of five main components: the engine, transmission system, running gear, steering, braking system, and electrical instrumentation. The engine is typically a two-stroke or four-stroke gasoline engine with high RPM, usually above 5,000 revolutions per minute. The engine crankcase is integrated with the clutch and gearbox, resulting in a compact design.
10
3
Share

What are the reasons for sudden fuel supply failure while driving?

The reasons for sudden fuel supply failure while driving: 1. Issues with the ignition system; 2. Throttle malfunction or intake manifold air leakage; 3. Fuel pump unable to build sufficient pressure, fuel injector unable to spray enough fuel; 4. Oxygen sensor failure; 5. Fuel line blockage causing poor acceleration; 6. Damaged car filter unable to function properly. Solutions for car fuel supply issues: 1. Remove and inspect the fuel pump. If excessive impurities are found in the car's fuel pump, timely treatment is required; 2. Check whether the car battery has sufficient charge. Insufficient battery power can lead to unstable voltage output, which may also cause car malfunctions.
3
1
Share

What Transmission Does the 10th Generation Civic Use?

The 10th generation Civic uses two types of transmissions: a 6-speed manual transmission and a CVT (Continuously Variable Transmission). The specific details are as follows: Manual Transmission: The manual transmission is also known as an MT transmission. It is currently the most stable transmission in the world due to its long development history and mature technology. Earlier manual transmissions were mostly 5-speed, but with technological advancements, many now feature 6-speed configurations. CVT Transmission: The CVT is a type of automatic transmission. Unlike other transmissions that have fixed gear ratios, the CVT does not have actual gears, resulting in smoother shifting without any noticeable jerking. However, CVTs also have drawbacks, such as limited torque capacity. In the realm of passenger vehicles, CVTs generally have the lowest cost and the least demanding technical requirements.
20
1
Share

How to replace the air conditioning filter in an Audi Q5?

Audi Q5 air conditioning filter replacement method is: 1. If replacing the air conditioning filter under the windshield on the passenger side, open the engine hood, then remove the decorative panel to take out and replace it; 2. If replacing the air conditioning filter under the glove compartment on the passenger side, the glove compartment needs to be removed, and then open the air conditioning filter cover for replacement. The air conditioning filter ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin and has strong moisture absorption. The Audi Q5 has dimensions of 4629mm in length, 1898mm in width, 1655mm in height, and a wheelbase of 2807mm. The vehicle is powered by a 2.0TFSI four-cylinder inline engine, paired with a 7-speed Stronic dual-clutch transmission.
6
3
Share

What are the differences between Ferrari 458 and 488?

Ferrari 458 and 488 differ in the following aspects: 1. Different engines: The Ferrari 458 is equipped with a 4.5L naturally aspirated V8 engine; The Ferrari 488 is equipped with a 3.9T turbocharged V8 engine. 2. Different power outputs: The Ferrari 458 has a maximum power of 570 horsepower and a maximum torque of 540 Nm; The Ferrari 488 has a maximum power of 669 horsepower and a maximum torque of 760 Nm. 3. Different body dimensions: The Ferrari 458 measures 4527mm in length, 1937mm in width, and 1213mm in height; The Ferrari 488 measures 4605mm in length, 1975mm in width, and 1206mm in height.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.