Where is the daytime running light fuse for the Mercedes S350?

2 Answers
DelElla
07/24/25 4:15am
For the 2007 Mercedes S350, all fuses are located in the fuse box on the side of the vehicle's trunk. You can find it by opening the trunk. Fuse: A fuse, also known as a current fuse, is defined by the IEC127 standard as a "fusible link." Its primary function is overload protection. When a fuse is correctly placed in a circuit, it will melt and cut off the current when the current abnormally rises to a certain level and heat, thereby protecting the safe operation of the circuit. PVC Material Car Trunk Mat: In addition to the benefits that all trunk mats offer, the PVC material car trunk mat is the most durable among all materials. It's likely that everyone would prefer a durable trunk mat when making a choice. Secondly, the PVC trunk mat is lightweight and highly flexible, making it very easy to remove and clean off stains and dust after prolonged use. This type of car trunk mat also has strong UV protection, ensuring that items stored in the trunk for extended periods won't develop odors even in the hottest weather.
Was this review help?
2
2
Share
JourneyAnn
08/10/25 11:52pm
The daytime running light (DRL) fuse for the Mercedes-Benz S350 is typically located in the fuse box inside the cabin, specifically above the driver's left footwell or in the passenger footwell area. Open the interior panel to reveal a row of fuses—the DRL fuse number may vary by model year, so consult your owner's manual or online resources for confirmation. As an experienced auto technician, I recommend disconnecting the battery negative terminal before inspecting the fuse to avoid short-circuit risks. Use a multimeter or visually check if the fuse is blown, and replace it promptly with one of the same amperage if melted. Note that DRL failure isn't always due to a fuse; it could involve bulb damage or wiring deterioration. Regular maintenance checks can prevent unexpected outages. Promptly addressing DRL issues is crucial as they significantly enhance daytime driving safety.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to Replace the Battery in a 10th Generation Civic Car Key?

Hold the metal tip of the key with your fingers and pull out the mechanical key from it. Insert the mechanical key into the plastic slot in the key placement area to pry open the back cover of the remote key. Remove the old battery from inside the key, making sure to dispose of the used battery properly. Insert a new battery of the same model into the key, then reassemble the key by reversing the disassembly steps. Do not leave the key exposed in extremely cold environments below 0°C or extremely hot environments above 50°C, as this will significantly reduce the battery's lifespan.
14
0
Share

How to Open the Fuel Tank Cap on a Buick Verano?

Buick Verano's door lock and fuel tank lock are integrated. First, press the brake pedal of the Buick Verano to prevent the car from rolling, and prepare to power up the entire vehicle. Press the one-touch start button located at the lower right corner of the dashboard. Once pressed, the vehicle's electronic systems will be powered on. When the dashboard lights up, it indicates that the entire vehicle is powered on. The fuel tank lock switch is on the fuel tank cap, marked with a fuel tank symbol. Some models may have an indicator light or the switch located directly inside the cabin. With the vehicle powered on, simply press the fuel tank lock, and the fuel tank cap will automatically pop open. Remember to close the fuel tank cap promptly after refueling.
9
4
Share

How to Tow a Buick Excelle from the Rear?

Use a screwdriver to remove the rear cover of the Buick Excelle, where the towing hook is stored along with the vehicle tools. Turn on the ignition to release the steering wheel lock, shift the transmission into neutral, and release the parking brake to allow the vehicle to roll freely. Afterward, screw in the towing hook to the maximum extent, connect the towing rod to the towing hook, and proceed with towing. After towing, unscrew the towing hook, insert the cover, and secure it tightly. The vehicle must be towed slowly in a forward direction, avoiding excessive force to prevent damage from high towing tension.
10
2
Share

How to Remove a Car Sunroof?

Take out a small flat-head screwdriver and gently pry open the trim panel along the gap with the small flat-head screwdriver. Be careful to do it lightly to avoid breaking the plastic clips inside. Remove the right-side screw. Take out a T-20 spline and use it to gently remove the screw. Keep the removed screw safely. There is a screw on the left side securing the sunroof switch. Remove the second screw and keep it safely for reinstallation. Take out the small flat-head screwdriver again and gently pry open the clips on both sides with it. This will separate the sunroof switch from the headliner. Take out the T-20 spline and use it to remove this screw. Disconnect the wiring harness plugs at the sunroof switch—there are three in total—one by one.
15
5
Share

What to Do When a Car's Valve Core Leaks Air?

If you find that the valve core of your tire is leaking air, the cause is likely due to aging of the valve stem. In this case, you need to replace the old valve stem with a new one, which involves cutting off the old valve stem and installing the new one. The rubber washer under the screw is usually the cause of the valve core leaking air. Therefore, before installation, make sure to clean any debris around the installation area of the valve stem on the rim. Then, cut a section from the old inner tube that includes the valve stem, and cut out a circle about 2 centimeters in diameter around the valve stem. Place one rubber circle onto the valve stem and install it onto the rim. Then, fit another rubber circle over the valve stem on the outside of the rim.
10
1
Share

What are the four steps to start a car?

Adjust the front and rear distance. For manual transmission, mainly adjust the left foot. When the clutch is fully depressed by the sole of the foot, there should be a slight margin left. Fasten the seat belt. Insert the key into the ignition lock, turn on the ignition switch, then observe whether all gauges are functioning normally, start the engine, and engage the correct gear. Turn on the left (right) turn signal and honk the horn as a signal, while observing the front, sides, above, and rearview mirrors of the vehicle to check for any obstacles that may hinder starting. Release the handbrake, slowly release the foot brake, and the vehicle will move forward. For manual transmission, gradually release the clutch, move the right foot to the accelerator pedal, and gently apply throttle.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.