Where is the Cullinan VIN located?

3 Answers
KadenFitz
07/23/25 5:04pm
Cullinan's VIN is located in the center of the engine compartment. Method to check the VIN: Find the engine compartment lock switch and pull it to release the lock. Once unlocked, lift the front cover of the engine compartment hood and use the hydraulic strut to support it. You will then see the layout of the engine compartment, where the VIN (also known as the engine number or stamped number) is located. Vehicle Identification Number: Abbreviated as VIN, it is a unique 17-character alphanumeric code used to identify a vehicle's manufacturer, engine, chassis number, and other specifications.
Was this review help?
6
4
Share
LeSarah
08/10/25 12:48pm
I remember checking the VIN (Vehicle Identification Number) for the Cullinan is quite common. It's usually located at the lower right or left corner of the windshield, near the driver's side, and needs to be viewed clearly from outside the car through the glass. Sometimes, it might also be placed elsewhere, such as on the label inside the passenger door frame or near the shock absorber under the hood. When I first bought my Cullinan, it took some effort to find it—the garage lighting was dim, and I had to use my phone's flashlight to capture the complete number. The VIN is like a car's ID card, used for identification, insurance, or maintenance records. Luxury brands often set it up this way to prevent damage. I recommend being careful not to scratch the label when looking for it and keeping a photo of it on your phone for easy communication during repairs. The general location is similar to BMW or Mercedes SUVs, but the Cullinan's design is more refined, so the position might be slightly more hidden. Checking a few spots will eventually lead you to it.
Was this review help?
20
4
Share
Expand All
DiJeremiah
09/22/25 7:08am
From a technical perspective, the Rolls-Royce Cullinan's frame number, also known as the VIN, is primarily located in two places: first, at the bottom of the windshield, usually on the right side from the driver's view—this spot is easy to see but not frequently touched; second, on the door frame of the passenger side, where a small sticker label can be spotted upon opening the door. Personally, I prefer using a vehicle information app to assist—after scanning or entering the number, it automatically records the location diagram. If you can't find it, sometimes it's hidden on the firewall under the hood—just be careful not to touch any hot components. Checking it is quite simple: bring a flashlight or lighting tool to avoid searching on cloudy days. The frame number is crucial for preventing forgery or handling accidents. High-end cars like the Cullinan have standardized locations, unlike ordinary cars where the label under the hood is more obvious. So be patient—getting it right the first time saves a lot of hassle.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What are the main impacts of muddy roads on safe driving?

The main impacts of muddy roads on safe driving are frost boiling or subgrade collapse, which reduce the road surface adhesion coefficient, making vehicles prone to skidding, spinning, and side slipping. Additionally, due to the deteriorated road conditions, driving resistance increases, which can easily damage mechanical components and even lead to accidents. Safe driving techniques on muddy roads: 1. When driving on muddy roads, choose routes with solid texture, higher terrain, and shallower mud. On cambered roads, drive in the middle as much as possible. If there are ruts, follow them. 2. Before passing through muddy or frost-boiled sections, shift to the required gear early to maintain sufficient power, and avoid shifting or stopping midway if possible. 3. When driving through muddy sections, try to maintain a straight path. If you need to move to the side, first slow down in the middle of the road and gradually steer toward the edge. 4. When turning, slow down in advance and gently adjust the required steering angle. Avoid sudden and sharp turns.
15
3
Share

Where is the fuel tank cap switch on the Cruze?

The fuel tank cap switch on the Cruze is located on the rear right side of the vehicle, which is the passenger side. To open the fuel tank cap, first turn off the engine, then approach the fuel tank cap and press the rear side of the cap, facing the rear of the vehicle. A gentle press should suffice; if it doesn't open, try pressing a few more times. If the fuel tank cap is damaged, you can use the emergency manual switch located on the right side of the trunk to open it. The Cruze is a new-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources. It is positioned as a compact car, with dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 700mm. This model is available in two variants, equipped with a 1.4T turbocharged engine and a 1.5L engine, respectively.
16
5
Share

What is the minimum ground clearance of the Touran L?

The minimum ground clearance of the Touran L is 120mm, which prevents the chassis from scraping when going over speed bumps. However, when driving on rough or mountainous roads, it is advisable to maintain a low speed and avoid using high gears. Minimum ground clearance refers to the shortest distance between the car's chassis and the ground when the vehicle is fully loaded. The chassis affects the car's off-road capability, and the heavier the load, the smaller the ground clearance becomes. The Touran L is an MPV model under SAIC Volkswagen, with dimensions of 4527mm in length, 1829mm in width, and 1659mm in height, and a wheelbase of 2791mm. The Touran L offers six major value-added optional packages, including popular configurations such as a panoramic sunroof, seven-seat layout, and integrated child safety seats. Based on the 1.4TSI and 1.8TSI engines, the Touran L is available in seven different models with varying configurations, offering both five-seat and seven-seat versions for consumers to choose from.
16
1
Share

What does exceeding exhaust emission limits mean?

Exceeding exhaust emission limits means that a vehicle's emissions surpass the established standards. Currently, the primary reason for penalties during annual vehicle inspections is failing the exhaust emission test. As environmental challenges continue to intensify, China has been implementing increasingly stringent regulations on exhaust emissions, leading to a growing number of private vehicles failing their annual emission inspections. If a vehicle fails a random exhaust emission test, the relevant authorities will temporarily confiscate the vehicle's driving license. The owner must then carry out repairs and rectifications within 7 days and can only retrieve the license upon presenting a passing re-inspection certificate. Those who refuse to comply with the necessary corrections within the deadline will face penalties. It is recommended that vehicle owners enhance their knowledge and skills in professional vehicle maintenance.
3
4
Share

How to Deal with Extreme Nervousness During the Subject 3 Driving Test?

Methods to alleviate nervousness during the Subject 3 test are as follows: 1. Recall the test procedures: The most crucial aspect of the test is familiarity with the procedures, as they guide the subsequent operations and how to handle unexpected situations. Having a clear set of procedures and solutions in mind can bring more peace of mind. Nervousness often stems from unfamiliarity with the procedures and the unknown, so recalling them can help clarify thoughts and ease tension. 2. Divert attention: The more one fixates on something, the more nervous they become. In such cases, diverting attention away from the source of stress is helpful. Chatting with fellow students is a great method, as it not only shifts focus but may also provide insights from other test-takers, highlight common mistakes, or positively influence one's mindset. 3. Consult the instructor: As the test approaches, candidates may suddenly become concerned about details they previously overlooked, such as whether to shift gears or release the handbrake first when starting, or whether making a wrong turn signal will result in point deductions. Clarifying these points with the instructor over the phone can eliminate uncertainty and make the test go more smoothly. 4. Psychological self-suggestion: Nervousness during the test is largely psychological, primarily due to fear of failing. One effective strategy is to mentally accept the possibility of failing, treating the test as practice, and approaching it with a relaxed attitude. Remind yourself that it's okay if you don't pass this time—there's always another chance. Lowering expectations for the test can reduce emotional fluctuations, leading to a more stable performance.
17
0
Share

How long does it take to fully charge the battery after starting the car?

It takes about 4 hours of driving to fully charge the battery after starting the car. The alternator in the vehicle needs to operate at over 2000 RPM to reach full load capacity, at which point its power generation reaches the standard value indicated on the nameplate. However, it is not recommended to use the car's alternator to charge a completely dead battery. Daily precautions for battery usage: 1. Turn off all lights before shutting down the engine; 2. Turn off the air conditioning and audio system before shutting down the engine. The air conditioning system involves the compressor and blower, and the audio system is a high-power electrical device. If not turned off before shutting down the engine, they will automatically start the next time the car is started, placing a heavy burden on the battery and potentially causing damage; 3. Avoid leaving the vehicle parked for extended periods. It is recommended to drive the car at least once a week for a trip lasting more than 20 minutes to facilitate battery charging while driving; 4. Close all windows before shutting down the engine.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.