Where is the Cruze transmission module located?

1 Answers
VonAmelia
07/29/25 2:31pm
The transmission module of the Cruze is located inside the black cover at the lower right corner of the battery. Remove the screws covering it to access the transmission module inside the gearbox. The body dimensions of the Cruze are 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. The exterior design of this model remains sharp and dynamic, featuring a layered network with minimal upper connectivity. The sharp headlights highlight its powerful presence, while the lower central grille and bumper's sharp lines integrate seamlessly, giving the front fascia a more three-dimensional and sculpted appearance. Unlike the simplistic design style adopted by most family cars, the Cruze features richer yet well-organized lines. It also offers both hatchback and sedan variants.
Was this review help?
4
3
Share
More Forum Discussions

Where is the keyhole for the Buick Envision?

The Buick Envision has a keyhole on the driver's side door, but it is located beneath a protective cover. To use the keyhole, you need to pry open the cover. There is no keyhole inside the Buick Envision, as the vehicle is equipped with a push-button start system. Below is some relevant information about the Buick Envision: 1. Engine: The Buick Envision is a midsize SUV under the Buick brand. It is equipped with two engine options: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 169 horsepower and a maximum torque of 250 Nm. This engine features direct fuel injection technology and uses an aluminum cylinder head and block. It is paired with a 7-speed dual-clutch transmission. The 2.0-liter turbocharged engine produces 260 horsepower and a maximum torque of 400 Nm. It also features direct fuel injection technology and uses an aluminum cylinder head and block, paired with a 9-speed automatic transmission. 2. Suspension: The Buick Envision uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
12
3
Share

Can Blue and Green Antifreeze Be Mixed?

Antifreeze of different colors cannot be mixed. Different colors of antifreeze indicate different compositions. Mixing antifreeze with different components can cause chemical reactions, leading to antifreeze failure and sometimes even solidification. Even if the antifreeze is the same color, different brands may use different stabilizers, and mixing them can reduce cooling and cleaning effectiveness. Therefore, it is best not to mix them. It is recommended to use antifreeze of the same brand and color. If antifreeze is accidentally mixed, the antifreeze in the radiator must be completely drained, flushed with pure water, and then refilled. Antifreeze typically comes in colors such as green, blue, and pink, and some even have fluorescent effects. Generally, ethylene glycol is green, propylene glycol is blue, and glycerol is pink. The reasons manufacturers dye antifreeze different colors are as follows: Prevent Mixing: To avoid confusion with other liquids and prevent accidental ingestion, many manufacturers add different color formulations for distinction. Easy Leak Identification: When the engine leaks, the color makes it easy to identify and troubleshoot. Safety Considerations: These chemical components in the engine are toxic, so liquids like windshield washer fluid and antifreeze are dyed to prevent accidental ingestion.
6
1
Share

What is a Single Swingarm?

Motorcycle single swingarm refers to the single-sided rear fork of a motorcycle. The relevant introduction of the single swingarm is as follows: Function of the motorcycle single swingarm: This configuration is only applied to high-end motorcycle models. Apart from the appearance, there is not much difference between the motorcycle single swingarm and other types of swingarms. It still mainly bears the driving force of the engine and the complex forces from various directions brought by the tires during driving, similar to the human waist. Problems with the single swingarm: The single swingarm has many problems, with complex structure and high manufacturing difficulty, making it expensive. To meet strength requirements, the single swingarm is relatively heavier and requires regular maintenance, and chain adjustment is also less convenient.
2
2
Share

Address of Changan Automobile Engine Factory?

Production bases are located in Chongqing, Hebei, Nanjing, Harbin, and other places. Below is an introduction to Changan Automobile engines: Advantages: Changan Automobile engines are all new-generation clean, efficient direct-injection lean-burn engines independently innovated and developed by Changan Company. The intelligent composite combustion direct-injection engine (ICCS) has three major advantages: power, cleanliness, and quietness. Highlights: With a wheelbase and width that surpass those of vehicles in the same class as highlights, it also features high-level precision suspension and front subframe design, along with a high-rigidity sturdy chassis, making the power and handling more flexible.
11
4
Share

How are vehicle types classified?

Vehicles can be categorized into trucks, off-road vehicles, dump trucks, tractor vehicles, special-purpose vehicles, buses, and sedans, among others. Sedans can be classified based on engine displacement, including micro sedans (below 1 liter), light sedans (1-1.6 liters), medium sedans (1.6-2.5 liters), upper-medium sedans (2.5-4 liters), and luxury sedans (above 4 liters). Buses can be classified by length, such as micro buses (not exceeding 3.5 meters), small buses (3.5-7 meters), medium buses (7-10 meters), and large buses (above 10 meters). Trucks can be categorized by load capacity, including micro trucks (below 1.8 tons), light trucks (1.8-6 tons), medium trucks (6-14 tons), and heavy trucks (above 14 tons). The new standard, based on the international standard (ISO3833), divides vehicles into passenger cars and commercial vehicles. Passenger cars are further divided into standard passenger cars, convertible tops, luxury passenger cars, compact passenger cars, and convertibles.
7
2
Share

What are the body dimensions of the Wuling Hongguang?

The body dimensions of the Wuling Hongguang are 4390mm in length, 1660mm in width, and 1750mm in height, according to official data. The length of the Wuling Hongguang refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The Wuling Hongguang is equipped with two engines: a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine. The 1.2L naturally aspirated engine delivers 76 horsepower and a maximum torque of 110 Nm, with peak torque output between 3000 and 4000 rpm, paired with a 5-speed manual transmission. The 1.5L naturally aspirated engine delivers 99 horsepower and a maximum torque of 140 Nm, with peak torque output between 3400 and 4400 rpm, paired with a 6-speed manual transmission. National regulations stipulate specific requirements for vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle excludes side mirrors. The limitation on vehicle width is designed to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring adequate space during overtaking to prevent accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.