Where is the Cruze Flasher Relay Located?

1 Answers
RyanLynn
07/30/25 12:02am
The flasher relay of the Cruze is located under the engine hood, inside a fuse box which can be accessed by opening it. Below is some information about the flasher relay:1. The flasher relay, also known as a turn signal relay, functions to generate intermittent current that powers the turn signal lights, causing them to flash on and off to indicate the vehicle's direction of movement.2. When the vehicle is braking without turning, the flasher relay controls the circuit to illuminate the left and right rear lights as well as the trailer lights, signaling braking.3. When the vehicle is both turning and braking, it controls the circuit to make the front, rear, and trailer lights on the turning side flash to indicate direction, while the rear and trailer lights on the opposite side remain steadily lit to indicate braking.
Was this review help?
10
2
Share
More Forum Discussions

What are the manifestations of charging failure in Wuling Hongguang Mini?

Wuling Hongguang Mini charging failure manifests as the battery continuously displaying a charging state, and the power level remains fixed at a certain value. Generally, this situation can only be resolved by handing it over to a 4S shop. Below are precautions for charging the Wuling Hongguang Mini: Correct charging time: Electric vehicles require longer times to replenish energy. If using a home charging pile, it takes nearly 8 hours to fully charge, while a fast charging pile takes about 40 minutes to charge up to 80%. Develop a habit of frequent charging and avoid waiting until the battery is too low before charging. Avoid over-discharging the battery: Over-discharging the battery can reduce its lifespan. Although the battery pack is designed with a protection system, frequently driving the vehicle until the "red light" appears will affect the battery pack's longevity.
1
0
Share

Will the steering gear be damaged if the left front wheel is hit?

If the left wheel of a car is hit severely, it may affect the steering gear. Symptoms of steering gear failure: Difficulty in steering wheel returning to center, shaking or deviation of the steering direction, uneven steering effort (heavy on one side and light on the other), oil leakage from the steering gear, and abnormal noises from the steering gear. Function of the steering gear: The steering gear, commonly known as the steering box, is a crucial component for the steering function of a car and an important guarantee for driving safety. The role of the steering gear is to amplify the force transmitted from the steering wheel to the steering linkage and to change the direction of force transmission. The function of the car's steering system is to control the driving direction according to the driver's intention. The steering system is vital for the driving safety of the car, hence all components of the car's steering system are referred to as safety-critical parts.
9
4
Share

What is the problem when the door is closed but the system indicates it is not?

The reasons why the system indicates the door is not closed when it is actually closed are as follows: Door not properly closed: It may be that one of the doors is not properly closed. If the door is properly closed, the status light should not be on. Please check if the door is properly closed and if the door position switch is functioning well. Trunk not tightly closed: It could also be that the trunk is not tightly closed. Even if other doors are tightly closed, the system may still indicate that a door is not closed. In this case, check if the trunk is tightly closed. Door closure sensor damaged: Another possibility is that the sensor switch for door closure is damaged and needs to be replaced. Or the sensor may be faulty; try opening the door and closing it again with more force.
11
5
Share

Why is the air conditioning not cooling at idle speed?

The reasons why the air conditioning is not cooling at idle speed are: 1. The refrigerant in the air conditioning system has leaked completely, resulting in insufficient refrigerant, so the air conditioning does not cool. 2. Some components in the air conditioning system, such as the pipelines, air conditioning pump, condenser, and evaporator box, may be damaged, causing refrigerant leakage. Internal damage to the air conditioning pump can prevent it from starting the cooling effect. Generally, a damaged air conditioning pump will produce abnormal noises, so check the air conditioning pump and replace it if it is damaged. 3. The condenser fins in the air conditioning system are too dirty, causing the pressure and temperature of the air conditioning system to be too high. To protect the air conditioning system, the air conditioning pump stops working, so the air conditioning does not cool. You can use a high-pressure water gun to clean the condenser fins and then dry them with a high-pressure air gun.
11
4
Share

Should I Replace the Battery at a 4S Shop or a Repair Shop?

Replacing the battery can be done at either a 4S shop or a repair shop. More details are as follows: 1. The functions of the battery are: a. When starting the engine, the battery supplies power to the starting system, ignition system, and electronic fuel injection system. b. When the engine is stopped or idling, it provides power to the vehicle's electrical equipment. c. When the generator's output is insufficient, it can assist in supplying power to the electrical equipment. d. It mitigates the impact voltage of the motor, protecting the vehicle's electronic devices. e. It can store excess electricity generated by the alternator. The maintenance methods for the battery are: a. Start the car regularly to charge the battery. b. When the electrolyte is low, replenish it with distilled water or a dedicated replenishment fluid. c. During daily driving, frequently check whether the small holes on the battery cover are ventilated. d. Inspect the positive and negative terminals for signs of oxidation. e. Check all parts of the circuit for aging or short circuits. f. Turn off electrical equipment when leaving the car.
18
1
Share

How long should you park before turning off the engine?

You should turn off the engine if you park for more than two minutes, as it is more fuel-efficient and appropriate to do so after parking for over 2 minutes. Effects of parking without turning off the engine: When a vehicle remains parked with the engine running for an extended period, the engine continuously operates at low RPM. This condition makes the pistons and valves more prone to carbon buildup, leading to unstable idling and other adverse effects on the engine's performance. It may even impact the engine's lifespan. Precautions when turning off the engine: Check if the headlights are turned off, as they are directly powered by the battery and will remain on as long as the switch is activated, regardless of whether the key is inserted or not. Also, ensure the turn signals are reset. In some vehicles, the turn signals also function as parking lights. When the turn signal is activated with the engine off, the corresponding bulb will stay lit, serving as a warning to pedestrians when parked on the roadside at night.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.