Where is the cruise control button on the new Bora?

How to Cancel the Outlander Maintenance Reminder?

Steps to reset the Outlander maintenance light: 1. Turn the ignition switch to the "OFF" mode. Repeatedly press the indicator selection button at the lower right of the instrument panel until the information display switches to the maintenance cycle reminder. 2. Then, press and hold the indicator selection button for more than 5 seconds to complete the maintenance light reset. Here is more information about the car maintenance light: 1. The function of the maintenance light is to record the mileage of important components, acting like a timer to remind the car owner and maintenance personnel. 2. If related parts are replaced without resetting the maintenance light, it will not affect the vehicle's performance, but it may cause inconvenience for future part replacements, as the exact usage time of the new parts cannot be accurately determined.

5

3

Share

What are the causes of low idle speed?

The causes of low idle speed are as follows: 1. It may be due to inaccurate speed display caused by an inaccurate tachometer sensor. The idle speed is regulated by the computer and generally does not change without reason. 2. A dirty throttle body or a dirty mass air flow sensor can cause inaccurate intake data, leading to low idle speed. The solutions for low idle speed are as follows: 1. Check all intake system pipe connections and hoses for leaks, and whether the air filter is excessively dirty or clogged. 2. Inspect the idle air control valve. If the bypass passage inside the idle air control valve is clogged due to excessive carbon buildup, the intake air volume decreases, and the engine speed drops. For electronic throttle bodies without an idle air control valve, carbon buildup in the throttle body area may reduce idle air intake, causing low idle speed. 3. Check the exhaust gas recirculation (EGR) system. If the EGR valve is open during idle or if there is a hose leak, exhaust gas will enter the intake manifold, potentially reducing the proportion of fresh air in the air-fuel mixture and lowering idle speed. 4. Inspect the fuel evaporation system for leaks. If there is a leak in the hose between the fuel evaporation system and the intake manifold, more fuel will participate in combustion, but the intake air volume does not increase, resulting in an overly rich mixture, reduced combustion efficiency, and unstable idle. 5. Check if the fuel pressure is too low. If the fuel pressure is insufficient, fuel supply will be inadequate, leading to low idle speed. 6. Verify if the fuel injectors are functioning properly. Fuel injectors may become clogged due to excessive dirt, reducing fuel injection volume and causing low idle speed. 7. Check the connection circuit between the fuel injectors and the computer. If there is an open circuit or poor connection in one injector's wiring, causing the injector to fail to spray fuel or spray improperly, idle speed will drop. 8. Inspect the fuel for contamination. If the fuel quality is poor or contaminated, it will affect combustion efficiency, reduce combustion energy, and result in low idle speed. 9. Check the spark plugs for dirt, cracks, or wear. Verify if the spark plug gap is incorrect, if the electrodes are burned or damaged, and if the spark plug heat range is correct. 10. Inspect the spark plug wires for leakage, cross-firing, incorrect routing, and whether the resistance values are within the standard range. 11. Check the ignition coils for cracks, carbon buildup, and whether the primary and secondary coil resistance values are within the standard range. 12. Verify the signal wiring connection between the engine control module and the ignition control module, and ensure the power supply is normal. 13. Check the coolant temperature sensor and intake air temperature sensor. 14. Inspect the cylinder compression. If there is insufficient cylinder pressure or excessive variation between cylinders, engine performance will decline, idle speed will drop, and operation will become unstable.

4

Share

What is the load standard for sedans?

The load standard for sedans does not have a calculation method; it can only be determined based on the load capacity marked on the nameplate when the car leaves the factory. The national standard is 375 kilograms, meaning the production load capacity of the car cannot be less than 375 kilograms. The vehicle's load capacity is indicated by the manufacturer on the nameplate as technical parameters, then verified by the traffic police department, and issued with a driving license. Below are the load standards for trucks: 1. For two-axle trucks, the total mass of the vehicle and cargo exceeds 18 tons. 2. For three-axle trucks, the total mass of the vehicle and cargo exceeds 25 tons; for three-axle articulated vehicles, the total mass exceeds 27 tons. 3. For four-axle trucks, the total mass of the vehicle and cargo exceeds 31 tons; for four-axle articulated vehicles, the total mass exceeds 36 tons. 4. For five-axle articulated vehicles, the total mass exceeds 43 tons. 5. For six-axle and above articulated vehicles, the total mass exceeds 49 tons, among which if the tractor drive axle is single-axle, the total mass exceeds 46 tons.

1

5

Share

Which city does the license plate 'Hei M' belong to?

Hei M belongs to Suihua city. Below are the license plate codes for various regions in Heilongjiang Province: 1. Hei A - Harbin City, Hei B - Qiqihar City, Hei C - Mudanjiang City, Hei D - Jiamusi City, Hei E - Daqing City; 2. Hei F - Yichun City, Hei G - Jixi City, Hei H - Hegang City, Hei J - Shuangyashan City, Hei K - Qitaihe City; 3. Hei L - Songhuajiang Region, Hei M - Suihua City, Hei N - Heihe City, Hei P - Daxing'anling Region, Hei R - Agricultural Reclamation System. Additional information: License plates, commonly known as vehicle plates, are panels hung at the front and rear of vehicles, typically made of aluminum, iron, plastic, or paper, displaying the vehicle's registration number, registration region, and other relevant information.

12

3

Share

Can a car switch from using 95 octane gasoline to 92 octane after burning 95?

A car cannot switch from using 95 octane gasoline to 92 octane gasoline after filling up with 95 octane. The higher the engine's compression ratio, the higher the requirement for gasoline's anti-knock performance. Therefore, engines with high compression ratios generally need to use gasoline with an octane rating of 95 or above and cannot directly switch to 92 octane. Differences in performance between the two types of fuel: The proportion of isooctane in 92 octane gasoline is much lower than that in 95 octane gasoline. The higher the octane rating, the higher the isooctane value. A higher proportion of isooctane means better anti-knock performance of the gasoline. After combustion, it has a significant restraining effect on the formation of carbon deposits. 92 octane gasoline can be directly replaced with 95 octane gasoline, as they only differ in isooctane value. In other words, low-octane gasoline can be directly replaced with high-octane gasoline without any additional maintenance operations. However, 95 octane gasoline cannot be directly replaced with 92 octane gasoline. Hazards of using the wrong fuel: Corrosion of the fuel pump and other components of the fuel system: Fuel provides some lubrication and rust prevention for the fuel pump. If the fuel contains excessive water, it can easily cause internal corrosion of the fuel pump, leading to damage. Water in the fuel may also enter the engine, causing corrosion of other components in the fuel system and resulting in poor engine combustion or even failure to start. Damage to the fuel filter: Water and other contaminants in low-quality fuel can clog the filter paper of the fuel filter. If the filter is clogged, it can lead to insufficient fuel supply pressure to the engine, causing engine failure. If the filter deteriorates, it can cause the fuel filter to lose its filtering effect, allowing impurities in the fuel to directly enter the engine and cause serious harm. Damage to the fuel injector: Impurities in low-quality fuel can easily clog the fuel injector, leading to poor combustion or even misfiring. Impurities in the fuel injector can also form carbon deposits under high temperatures, causing the injector to stick or even fail. If minor clogging of the fuel injector occurs due to occasional use of low-quality fuel, it can be resolved by cleaning the injector without disassembly. However, if the fuel contamination issue is severe, a thorough cleaning of the fuel tank and fuel system is required. Engine knocking and severe carbon deposit issues: Due to poor anti-knock performance, low-quality fuel can easily cause knocking in the cylinders during combustion, worsening engine combustion and reducing power. Severe knocking can even damage the piston, necessitating an engine overhaul. At the same time, low-quality fuel can lead to severe carbon deposit issues, which are the root cause of many engine problems, such as difficulty in cold starts, idle shaking, reduced power, and valve sticking.

16

0

Share

What are the differences between the Leiling Hybrid and Leiling e+?

Hybrid e+ is a plug-in hybrid electric vehicle, while Hybrid is a regular hybrid electric vehicle. Here are more details about the Leiling Hybrid and Leiling e+: 1. Both the Hybrid and Hybrid e+ are equipped with a 1.8-liter naturally aspirated engine and a 92-horsepower electric motor. 2. The 1.8-liter naturally aspirated engine has a maximum power of 92 kW and a maximum torque of 142 Nm. This engine can output maximum power at 5,200 rpm and maximum torque at 3,600 rpm. The engine features VVT-i technology and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 53 kW and a maximum torque of 163 Nm. 3. The Leiling uses a MacPherson independent suspension at the front and an E-type multi-link independent suspension at the rear. The Leiling's exterior design is quite attractive, and the interior design also aligns well with the aesthetic preferences of young consumers.

9

2

Share

Where is the cruise control button on the new Bora?

How to Cancel the Outlander Maintenance Reminder?

What are the causes of low idle speed?

What is the load standard for sedans?

Which city does the license plate 'Hei M' belong to?

Can a car switch from using 95 octane gasoline to 92 octane after burning 95?

What are the differences between the Leiling Hybrid and Leiling e+?

Is Lexus a German or Japanese Brand?

What are the main types of new energy vehicles?

Where is the license plate number starting with Gan B from?

What are the consequences of not replacing the fuel filter?