Where is the Corolla's Daytime Running Light Located?

1 Answers
Rosalie
07/29/25 2:05am
Toyota Corolla's daytime running lights are automatically activated when the vehicle is started and do not have a manual switch, so there is no way to turn them off. Additional information: The purpose of daytime running lights is to make the vehicle more visible during daylight driving. These lights provide illumination in rainy or foggy conditions and are used in conjunction with headlights and hazard lights to enhance visibility and alert surrounding vehicles. Nowadays, the use of daytime running lights has become increasingly widespread. In some countries, equipping vehicles with daytime running lights has even become a mandatory automotive production regulation.
Was this review help?
4
5
Share
More Forum Discussions

What does it mean when the EPC light appears on the car dashboard?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other circumstances. The power-on self-test is a pre-driving check of all vehicle sensors. Typically, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light remains on after the vehicle starts or illuminates under other conditions, the possible causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will activate if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: This may include substandard fuel, fuel degradation, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with components like the intake valves can also cause the EPC light to illuminate. ECU control unit fault: Examples include interference with the vehicle computer signals or false alerts from the computer. Brake light fault: This could involve non-functional brake lights, faulty brake switches, or brake circuit issues. Solutions for the EPC light illumination: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle body, etc. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains illuminated. If it turns off, there may be no issue, and the light might have been triggered by external factors. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions to regulate the powertrain. The EPC indicator light typically appears in two colors: yellow and red. A yellow EPC light indicates a fault, but the vehicle can still be driven cautiously to a repair shop. A red EPC light signifies a serious issue, and the driver should pull over immediately and contact a technician for repairs. Continuing to drive with a red EPC light can damage core components or compromise safety.
13
1
Share

What does the auto switch in a car indicate?

The auto switch in a car refers to the automatic headlight switch, which means the headlights will automatically adjust to turn on or off based on the ambient brightness without manual control. Automatic headlights are controlled by a light sensor installed on the vehicle. When the light becomes dim, the headlights automatically turn on; when the light becomes bright, the headlights automatically turn off. They can also automatically switch between high and low beams during encounters with other vehicles. The working principle of automatic headlights involves a photosensitive sensor generating a voltage signal in response to external light changes, which is then fed back to the automatic headlight control module. After data analysis, the module determines whether the lights should be turned on. The system consists of components such as a photoresistor, control module, headlights, and speed sensor.
15
5
Share

What to Do If the Trunk Lock Won't Open?

Solutions for a trunk lock that won't open: 1. If you frequently use the key to open the trunk, the linkage rod may be broken—take it to a repair shop to open the trunk. 2. If you always use the remote control to open the trunk, the lock cylinder may be dirty or rusted—spray some rust remover into the lock cylinder a few times to open it. 3. If the remote key isn't used to unlock the trunk, it may be difficult to open—press the unlock button on the key first or check if the key battery is dead. 4. Mechanical failure of the trunk itself, such as a broken wire or other issues, may also prevent the trunk from opening.
5
0
Share

What Causes the Ticking Noise When Accelerating but Not When Releasing the Throttle?

Reasons for the ticking noise when accelerating but not when releasing the throttle: 1. If the sound is not very clear inside the car, it is generally not a major issue. Vehicles often produce corresponding ticking noises, which can be from the fuel injector working or the valve area. 2. Most cars will have slightly louder engine noise during cold starts compared to when the engine is warm. As long as the sound is uniform, smooth, and not harsh, it is usually not a problem. 3. Oil-related issues, such as using low-quality oil or not changing the oil for an extended period, can increase friction between the valves and guides or hydraulic lifters, making various engine noises more pronounced.
11
3
Share

What does pause mean?

pause: The cruise control system of the motor vehicle is paused. Specific introduction is as follows: 1. It is necessary to resume the cruise control system, or turn off the cruise control system, and then this indicator on the dashboard will turn off. 2. Once a fault indicator appears on the dashboard of the motor vehicle, the vehicle must not be driven, and the relevant parts must be checked. 3. The cruise control system of the motor vehicle can also be called the cruise control device or speed control system. It can be turned on or off according to the driver's requirements. The driver first needs to set the speed. After turning it on, the driver does not need to step on the accelerator pedal, and the vehicle will automatically maintain the speed, allowing the vehicle to travel at a fixed speed.
4
3
Share

What does the maximum torque speed of 1500-4500 mean?

The maximum torque speed of 1500-4500 means that the engine will produce its maximum torque within the speed range of 1500 to 4500 revolutions per minute. Maximum torque refers to the highest torque value across the entire engine speed range, typically measured in N·m (Newton meters). The engine speed at which this maximum torque occurs is called the maximum torque speed, measured in rpm (revolutions per minute). Relevant information about maximum torque speed is as follows: 1. Torque is an important parameter of engine performance, representing the average moment output from the crankshaft during engine operation. 2. Maximum torque generally occurs in the medium to low speed range of the engine, and tends to decrease as the speed increases.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.