Where is the Corolla's cabin air filter located?

Will the Car Stall When Braking from 4th Gear to 20 mph?

Generally, it won't stall, but if you keep the clutch partially engaged while braking to a stop, the car may stall. In any gear (except neutral), if the car comes to a complete stop without pressing the clutch, it will stall. Here is some relevant information: When the gear is in 1st to 5th: If the clutch is not pressed and the speed starts to decrease, the car will stall when the speed drops to a certain point. Additionally, water in the exhaust pipe, engine failure, or running out of fuel can also cause stalling. If the gear is still engaged: Stalling due to not pressing the clutch can damage the car. Forcing the gear shift without fully pressing the clutch can also lead to stalling and may cause the gear teeth to break. Broken gear teeth can result in frequent gear disengagement in the future.

3

Share

What size tire is equivalent to 11r22.5?

11 refers to the tire section width of 11 inches, r stands for radial tire (also known as tubeless tire), and 22.5 indicates the rim diameter (wheel diameter). Below is relevant information: Tire notation: Tire specifications are commonly represented by a set of numbers. The first number denotes the tire section width, while the latter indicates the rim diameter, both measured in inches. For example, 165/70-R14 means a tire width of 165 millimeters, an aspect ratio of 70, and a rim diameter of 14 inches. Symbol meanings: The middle letter or symbol carries specific meanings: "X" represents high-pressure tires; "R" and "Z" denote radial tires; "-" indicates bias-ply tires. Due to their inferior safety, load capacity, and high-speed stability, bias-ply tires are only used in some low-end off-road vehicles and heavy-duty trucks.

9

0

Share

What is the maximum speed in first gear when pressing the accelerator?

When the car is in first gear, pressing the accelerator to 8000 RPM results in a speed of 50 km/h, and at 12000 RPM, the speed reaches 70-80 km/h. Below is relevant information: Speed range: First gear corresponds to a speed of 0-5 km/h. Second gear corresponds to 5-20 km/h, third gear to 20-40 km/h, fourth gear to 40-60 km/h, and fifth gear to 60-100 km/h. Gear shifting timing: For most cars, the optimal shifting point is at an engine speed of 2000 RPM, not exceeding 2500 RPM. For high-displacement, high-power engines, shifting can be done around 3000 RPM.

12

2

Share

Will a Faulty Catalytic Converter Affect Power and Fuel Consumption?

No, if the catalytic converter is damaged, the result would be excessive exhaust emissions and the illumination of the engine fault light, but it would not significantly affect fuel consumption. Below is relevant information: Appearance: The catalytic converter looks like a metal can from the outside, but it contains a 'substrate' inside for purifying exhaust gases. This honeycomb-shaped ceramic substrate is coated with a precious metal slurry, primarily composed of platinum, rhodium, and palladium. Function of purifying exhaust gases: The precious metals act as catalysts, reducing hydrocarbons (HC) and carbon monoxide (CO) in the exhaust into water and CO2, while breaking down nitrogen oxides (NOx) into nitrogen and oxygen. This is the exhaust purification function of the catalytic converter.

19

3

Share

What does acc-laks mean?

ACC refers to the Adaptive Cruise Control system, and LKAS is the Lane Keeping Assist System. Below is relevant information: LKAS: The function of LKAS is to prevent the vehicle from deviating from its lane. When there is a possibility of the vehicle leaving the driving lane, the system alerts the driver through a warning, prompting the driver to consciously maintain the vehicle within the lane. LKAS can be used when the vehicle speed is above 65 km/h and driving on straight roads or curves with a radius of 230 meters or less. ACC: The Adaptive Cruise Control system is an intelligent automatic control system developed from the existing cruise control technology. During vehicle operation, the distance sensor (radar) installed at the front of the vehicle continuously scans the road ahead, while the wheel speed sensor collects speed signals.

6

4

Share

What does the clearance date mean in Traffic Management 12123?

Clearance date refers to the date when the driver's license points start to be recalculated. The clearance date is the dividing line between two scoring cycles. Below is a detailed introduction about Traffic Management 12123: Overview: Traffic Management 12123 is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, with technical support provided by the Traffic Management Research Institute of the Ministry of Public Security. The service targets nationwide vehicle owners, drivers, and other users. Services: It provides comprehensive traffic safety services including personal user registration for the internet service platform, appointment, acceptance, and handling of vehicle/driver's license/illegal activity processing, traffic safety information inquiries, business notification reminders, business guidance, and road access services.

10

2

Share

Where is the Corolla's cabin air filter located?

Will the Car Stall When Braking from 4th Gear to 20 mph?

What size tire is equivalent to 11r22.5?

What is the maximum speed in first gear when pressing the accelerator?

Will a Faulty Catalytic Converter Affect Power and Fuel Consumption?

What does acc-laks mean?

What does the clearance date mean in Traffic Management 12123?

Does a Driver's License Expire?

Which country produces Yamaha?

Can Hazard Lights Be Used During Heavy Rain on Highways?

Can I Renew My Driver's License on 123123 When It Expires?