Where is the coolant located in the Mercedes-Benz SLK230?
1 Answers
Mercedes-Benz SLK230 coolant is located behind the left headlight in the engine compartment. Mercedes-Benz SLK230 coolant location: Mercedes-Benz SLK230 coolant is located behind the left headlight in the engine compartment. Method for adding antifreeze: Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze. Insert a rubber hose connected to a tap into the radiator filler port, turn on the tap, and allow tap water to continuously flow through the engine cooling system. During the flushing process, keep the engine idling and continue the operation until clean water flows out from the radiator. Turn off the tap, wait until all water in the cooling system is drained, then close the radiator drain valve. Add antifreeze from the radiator filler port until the radiator is full. Unscrew the reservoir cap, add antifreeze up to the "Max" mark, being careful not to exceed it. Replace and tighten the radiator cap and reservoir cap. Start the engine and let it idle for 2-3 minutes, then unscrew the radiator cap. At this point, the coolant level will drop as some air is expelled from the cooling system. Add more antifreeze until it reaches the "Max" mark again.