Where is the computer port of the Peugeot 408 located?

1 Answers
ColemanLee
07/30/25 1:19am
The computer port of the Peugeot 408 is located under the cover beneath the buttons on the left front side of the driver's seat. Open the cover to find the green connector, which is the OBD port, also known as the computer port. Detailed information is as follows: 1. There are Jack and USB ports under the cover inside the front center armrest box. 2. The OBD port is generally a 16-pin female connector, trapezoidal in shape, making it easy to identify. 3. Some models have a protective cover over the OBD port, and the visible OBD port is usually black, white, or blue. 4. OBD stands for On-Board Diagnostics, an onboard automatic diagnostic system, displayed on the dashboard as a symbol resembling a faucet.
Was this review help?
20
2
Share
More Forum Discussions

Can Bird Droppings Corrode Car Paint?

Bird droppings can corrode car paint as they contain highly acidic substances. These strong acids can quickly corrode the car's paint, forming an oxidized layer on the surface, which may lead to cracking of the paint. Over time, this can leave permanent marks. It is advisable to avoid parking under trees or near streetlights and power lines, and using a car cover can help prevent this. Below are methods to handle bird dropping corrosion on car paint: Method 1: Address the root cause by avoiding parking under trees or near streetlights and power lines, and use a car cover. Method 2: If bird droppings are found on the car, clean them promptly. Regular car maintenance is essential, including paint protection treatments such as glaze sealing, crystal coating, or film application. Method 3: If the car paint has been corroded by bird droppings, leading to oxidation or cracking, consider polishing and waxing the paint surface. In cases of severe cracking, repainting may be necessary.
7
3
Share

What are the models and specifications of hydraulic cylinders?

Common standards include Φ140/100-800, which means the cylinder bore is 140, the rod diameter is 100, and the stroke is 800. For three-stage and four-stage hydraulic cylinders, the rated working pressure is 19MPa, the stroke ranges from 3880 to 6200mm, the maximum extending sleeve diameter is 195mm, and the cylinder thrust is 20-56 tons. The structural composition of hydraulic cylinders is introduced as follows: Introduction 1: The hydraulic cylinder of a hydraulic press consists of a cylinder head (guide sleeve), cylinder body, piston rod, piston head, sealing device, buffer device, and exhaust system. The hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy for linear motion. The hydraulic cylinder has a simple structure, smooth movement, and reliable operation. Introduction 2: The cylinder body of the hydraulic cylinder is made of high-quality carbon structural steel forgings to ensure material uniformity. The inner hole of the cylinder is subjected to strong rolling to improve surface smoothness, precision, hardness, and high rigidity, with good wear resistance. The hydraulic cylinder has a long service life. The piston rod and piston head of the hydraulic cylinder are made of carbon structural steel forgings, with chrome plating and fine grinding on the surface, providing high hardness and strong pressure resistance. Introduction 3: The sealing device of the hydraulic cylinder uses imported high-quality sealing rings, which have excellent wear resistance and heat resistance, low friction, avoiding cylinder leakage, ensuring reliable operation and extending the service life of the sealing rings. Introduction 4: The buffer device of the hydraulic cylinder can slow down the piston at the end of the stroke and bring the speed close to zero, reducing the inertial force of the piston moving parts and preventing collisions between the piston parts and the cylinder body, thereby reducing noise and vibration, avoiding damage to the hydraulic cylinder body, and extending the service life of the hydraulic cylinder. The exhaust system of the hydraulic cylinder ensures the smooth operation of the hydraulic cylinder and prevents intermittent impact forces and vibrations.
16
0
Share

Can a Motor Vehicle Driving License Be Used to Ride a Motorcycle?

Having a motor vehicle driving license does not permit one to ride a motorcycle. The traffic management department of the public security authority should establish a supervision system for the vehicle management office's handling of motor vehicle driving license services. Additionally, they should strengthen the supervision and management of driver examinations, the issuance of driving licenses, and their use. The following driving licenses allow one to ride a motorcycle: Introduction 1: The driving licenses that permit motorcycle riding are types D, E, and F. Among them, a D license allows the holder to drive all types of motorcycles, including both three-wheeled and two-wheeled ones, regardless of the engine displacement or model. Introduction 2: The D license covers the vehicle types permitted by the E and F licenses. An E license allows the holder to drive all two-wheeled motorcycles, regardless of engine displacement, and also includes the vehicle types permitted by the F license. An F license only permits the holder to ride light motorcycles with an engine displacement below 50CC (excluding 50CC). No car or other type of driving license allows one to ride a motorcycle.
19
4
Share

What Causes the Corolla's Locking Horn Not to Sound?

Corolla's locking horn not sounding is usually caused by the vehicle not being locked or the anti-theft system's battery running out. Here are the relevant details: Reasons why the locking horn does not sound: The vehicle is not locked, and the anti-theft system will only work after locking; the movement is slight, and lightly touching the vehicle will not activate the anti-theft system; the anti-theft system's battery is depleted, and replacing the power source will solve the issue; the anti-theft system is damaged, such as a short circuit in the circuit, and requires repair at a service center. Activating the locking horn: Locking and unlocking are divided into hazard light indicator and horn modes. By simultaneously pressing the lock (LOCK) and unlock (UNLOCK) buttons on the smart key for more than 2.5 seconds, the hazard light will flash once, and the horn will sound once, indicating that the horn mode has been activated.
4
0
Share

What are the precautions for overtaking a car?

Here are the precautions for overtaking a car: 1. Observe the road conditions: Before overtaking, observe the road conditions ahead and try to choose a flat and straight road. Before overtaking, observe the situation of the lane you intend to use. Check the left rearview mirror to see if there is a car behind you attempting to overtake. Wait for the car behind to complete its overtaking maneuver before proceeding with your own. 2. Use of lights: When the conditions for overtaking are met, turn on the left turn signal, then alternately flash the high and low beams and honk the horn to alert the car in front. Confirm that the car ahead has signaled to yield before turning left. 3. Driving in the borrowed lane: If you are already in the borrowed lane, downshift and press the accelerator deeply to increase the engine speed and boost power. The reason for downshifting is that when accelerating, downshifting and pressing the accelerator provides a quicker response, allowing for faster acceleration.
13
4
Share

Why don't 4S shops allow the installation of cruise control?

When purchasing a vehicle, some owners request 4S shops to install cruise control functionality, but some 4S shops advise against it. This is because installing a cruise control system differs from installing other vehicle accessories. The cruise control system needs to be connected to the engine control circuit, car airbags, and the central console. Such modifications can alter the original vehicle's circuitry and wiring, and improper installation may even damage the car. Cruise control systems, also known as speed control systems or autonomous driving systems, function by automatically maintaining the speed set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a constant speed. Drawbacks of cruise control systems: They may malfunction, which can be extremely dangerous during high-speed driving. Cruise control is only suitable for use on highways or long-distance routes with light traffic and cannot be used on roads with complex conditions. When using cruise control, the driver's foot is freed from the accelerator pedal, leading to relaxation and reduced concentration. In emergency situations, this may delay braking response, resulting in untimely braking.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.