Where is the computer diagnostic port of Chery QQ located?

1 Answers
AliyahMarie
07/29/25 7:10pm
Chery QQ's computer diagnostic port is located either under the glove compartment on the passenger side or beneath the driver's instrument panel, both of which are standard OBDII ports. OBD stands for On-Board Diagnostics, a system that continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. If any situation that might lead to excessive emissions is detected, it will immediately issue a warning. The dimensions of the Chery QQ are 3564mm in length, 1620mm in width, and 1527mm in height, with a wheelbase of 2340mm. The Chery QQ is equipped with features such as remote central locking, power windows, power mirrors, aluminum alloy wheels, and an automatic window closing system.
Was this review help?
19
3
Share
More Forum Discussions

What are the differences between the 2016 Civic and the 2019 Civic?

The differences between the 2016 Civic and the 2019 Civic are: 1. Different emission standards: The 2016 Civic meets the China V standard, while the 2019 model meets the China VI standard. 2. Different body lengths: The 2016 Civic has a body length of 4649 mm, while the 2019 model is 4658 mm long. 3. Different transmissions: The 2016 Civic is equipped with a 6-speed manual transmission, while the 2019 model comes with a continuously variable transmission (CVT). The similarities between the 2016 Civic and the 2019 Civic are: 1. Same body structure: Both are 4-door, 5-seater sedans. 2. Same powertrain: Both are powered by a 1.0T turbocharged engine, delivering a maximum horsepower of 125 hp and a maximum power output of 92 kW.
20
0
Share

What to Do When the Rear Window Defroster Wire Breaks?

When the rear window defroster wire breaks, it cannot be repaired and requires replacement of the entire glass. Methods for maintaining car glass include: 1. Proper use of glass cleaner; 2. Applying a protective film to the car glass; 3. Insuring the car glass; 4. Thoroughly removing dirt from the car glass; 5. Regularly replacing the rubber seals. Methods for cleaning car glass effectively are: 1. Wet the glass with water, apply toothpaste evenly, gently scrub with a sponge, then rinse clean; 2. Dilute glass cleaner with water, pour into a spray bottle, spray onto the glass, and wipe clean with a soft, lint-free cloth; 3. Spray a small amount of water on the glass and wipe with old newspapers back and forth.
7
0
Share

How often should the spark plugs of a Teana be replaced?

The spark plugs of a Teana are recommended to be replaced after driving more than 40,000 kilometers or approximately every three years. Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is advisable to follow the user manual. The following standards can be referenced for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for external debris such as leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Install the removed high-voltage distributor wires in the firing order and secure the cover.
20
0
Share

What Causes Engine Abnormal Noise During Cold Start?

The causes of engine abnormal noise during cold start are: 1. Low oil pressure or wear in hydraulic lifters allowing air to enter; 2. Wear in valve rocker arms resulting in excessive valve clearance; 3. Throttle valve contamination due to accumulated sludge and carbon deposits; 4. Operational noise from carbon canister solenoid valve; 5. Malfunctioning fuel tank vent valve; 6. Fluid impact inside the recirculation pump; 7. Partial blockage in the fuel filter. Engine maintenance methods include: 1. Using high-quality engine oil; 2. Using qualified coolant; 3. Regularly cleaning radiator scale; 4. Periodic carbon deposit removal; 5. Timely replacement of three automotive filters; 6. Maintaining appropriate engine RPM.
1
2
Share

Where is the Audi A4 Body Control Module Located?

For older models, it is located under the driver's footwell, while for newer models, it is on the right side of the trunk. Below is relevant information: 1. Definition of the control module: The automotive engine control module is the core component of engine control. Based on input from various sensors, it controls fuel injection and ignition timing, and provides optimal control commands to other output devices. 2. Fault detection: Additionally, the ECM detects faults in itself, various sensors and actuators, serial data lines, and the malfunction indicator lamp (MIL) circuit. When a fault is detected, the ECM records the corresponding fault code and takes appropriate measures. 3. Replacement: The engine control calibration program is stored in an electrically erasable programmable read-only memory (EEPROM), which is a permanent memory soldered onto the ECM and cannot be replaced separately.
1
0
Share

Tire Specifications for the 2020 BMW X3?

BMW X3 Leading Edition front tire specifications are 245/45R20, rear tire specifications are 275/40R20. Other models have front and rear tire specifications of 245/50R19. Extended knowledge about automotive tires is as follows: Classification: Automotive tires can be divided into pneumatic tires and solid tires based on the carcass structure. The vast majority of modern vehicles use pneumatic tires. Depending on the internal air pressure, pneumatic tires can be categorized into high-pressure tires, low-pressure tires, and ultra-low-pressure tires. Low-pressure tires are commonly used in various types of vehicles. Pneumatic tires can also be divided into tube tires and tubeless tires based on their structural composition. Passenger cars generally use tubeless tires. Markings: Depending on the arrangement of the internal cord plies and cushion layers, tires can also be classified into radial tires and bias tires. Radial tires are widely used in vehicles. These markings are indicated on the tire sidewall.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.