···
Log in / Register

Where is the computer diagnostic connector of Fengguang 330 located?

4 Answers
CamilaRose
07/29/25 2:56pm

The computer diagnostic connector of Fengguang 330 is located behind the glove box on the passenger side. You can see it after removing the glove box. Dongfeng Fengguang 330 is a microvan under Dongfeng, equipped with two types of engines: a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine. The Fengguang 330 is a practical model launched by Dongfeng Xiaokang, with well-designed storage space. There are multiple storage compartments inside the car, enhancing the humanized concept. The car features a 2+2+3 seating design, with the armrests on the second-row seats improving passenger comfort, and the third-row seating space is satisfactory.

Was this review help?
9
2
Share
Karla
08/13/25 7:30am

I remember when driving the Fengguang 330, the computer diagnostic port was located right under the steering wheel. Just look down and you’ll find a small 16-pin black socket, usually designed at the lower left edge of the dashboard in the footwell area for easy connection to diagnostic tools. I often use a Bluetooth OBD interface to monitor fuel consumption and engine status, as it can quickly read fault codes like fuel system issues or sensor abnormalities. If you can’t find it, try feeling around the nearby fuse box area, as some cars may hide it slightly deeper. Checking this port during maintenance is crucial, especially when the engine light comes on, as it can help avoid bigger repair costs. It’s best to keep an inexpensive diagnostic tool at home for self-checks—saving both money and time.

Was this review help?
8
3
Share
Expand All
McMariana
10/11/25 5:25am

I found that the diagnostic port of the Fengguang 330 is quite easy to locate near the driver's seat, just below the steering wheel on the left side. That small port is usually gray or black and tucked away in an inconspicuous spot. As a female car owner, I love using my phone app to connect to it for real-time monitoring of the car's performance, such as tire pressure or engine efficiency—it's super convenient. If it fails to connect, it might be due to port aging or dust accumulation, requiring a simple clean. Safety first—always ensure the car is parked when operating to avoid straining your back. Making it a habit to scan every three months can prevent minor issues from escalating and save fuel, making it much more eco-friendly.

Was this review help?
8
5
Share
Expand All
Aaliyah
11/24/25 6:32am

During vehicle maintenance, the OBD interface of the Fengguang 330 is typically located in the lower left corner of the dashboard under the steering wheel. It features a standard 16-pin design, allowing tools to read fault codes such as excessive emissions or electrical defects. When operating, bend down and search slowly to avoid damaging the wiring. Common issues may include false alarms caused by loose connectors, so it's recommended to tighten them regularly. For safety, complex diagnostics should be performed by professional shops to ensure accuracy and avoid wasting your time and effort.

Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Deal with Scratches on a Sedan?

Methods for dealing with scratches on a sedan: 1. Hairline scratches: For fine scratches resembling hair strands, polishing or applying a rubbing compound can easily remove them with gentle wiping. 2. Light scratches: Applying toothpaste to shallow scratches on the car's primer can yield very noticeable results. 3. Moderate to deep scratches: These cannot be repaired by polishing. For small dents not exceeding 5mm, apply filler putty to level the surface, then proceed with touch-up painting. If the metal is exposed, clean the surface of any rust or welding residue, sand it smooth, apply a rust-proof oxidizer neutralizer, spray a primer, and repeat the painting, drying, and sanding process to repair. 4. Deep scratches: Severe deformations require bodywork treatment. Handling such scratches demands relatively high technical skills from the technician.
4
5
Share

How Many Kilometers Should Vehicle Clutch Plates Be Replaced?

Generally speaking, clutch plates can be replaced every 100,000 kilometers. However, due to different driving habits of drivers, the road conditions they encounter daily, and the mileage they travel, the replacement cycle may vary. Some vehicles may not require replacement even after exceeding 100,000 kilometers, while others may need replacement once a year. Therefore, when replacement is needed depends on the degree of wear. Extended Information: The clutch three-piece set: The working process of the clutch can be roughly divided into the separation process, the slip grinding process (semi-engagement process), and the engagement process. Every time the clutch is used, the clutch plates are worn during the slip grinding process. Proper use of the semi-engagement process can ensure smooth vehicle starting and reduce gear shift jerks; abuse of the semi-engagement process will lead to excessive wear of the clutch plates and the need to replace the clutch three-piece set.
5
4
Share

What is Lane Change Assist?

Lane Change Assist is an intelligent automotive safety technology that alerts drivers to obstacles or approaching vehicles within the safe range behind them through installed electronic control systems, typically via indicators on the side mirrors or other locations. Whether you're a novice driver or an experienced one, blind spots during lane changes are inevitable while driving. Additional information: 1. Forms of Lane Change Assist: It alerts drivers to approaching vehicles from behind via indicators on the side mirrors or other locations. This system automatically activates only when changing lanes at speeds above 60 km/h and won't function at lower speeds. 2. Vehicle Detection: It can detect vehicles approaching from the side or rear up to 50 meters away. If the system detects another vehicle, it notifies the driver via an LED indicator on the side mirror. If the driver activates the turn signal while preparing to change lanes but fails to notice vehicles in adjacent lanes, the system will warn the driver by flashing the LED signal.
5
2
Share

What are the symptoms of a problematic car transmission?

Issues such as transmission slipping, oil leakage, and jerking may occur. The following are symptoms of a problematic transmission: 1. Transmission slipping: While driving, if you hear the engine revving without a noticeable increase in speed, experience weak acceleration, or notice poor uphill performance with inexplicably high engine RPM while normal on flat roads. 2. Transmission jerking: Symptoms include noticeable jerking or shaking during gear shifts while driving. Possible causes include excessively high transmission fluid temperature, stubborn dirt and impurities inside, or valve body blockage leading to transmission jerking. Please visit a 4S shop or repair shop for inspection and maintenance. 3. Transmission noise: This manifests as inexplicable noises from the transmission during driving, with no identifiable source, sometimes loud, and intermittent or very dull during gear shifts. The causes of transmission noise are complex, possibly due to long-term high temperatures reducing the anti-wear and lubricating properties of transmission fluid, leading to wear or damage to components like bearings and gears.
2
1
Share

What are the requirements for gear shifting in the Subject 3 driving test?

The gear shifting requirement in the Subject 3 driving test is to be completed within 100 meters, with the gear sequence being 2nd gear, 3rd gear, 4th gear, and then back to 3rd gear. First, shift from a lower gear to a higher gear, and then shift back from the higher gear to the lower gear. Below are some mnemonic tips for gear shifting: 1. Right before left: The right side is for the accelerator and brake, while the left side is the clutch pedal. Whether shifting up or down, always start with the accelerator or brake on the right side, and after matching the speed, press the clutch pedal. 2. Act immediately: After pressing the clutch pedal, act immediately. Use your left hand to steady the steering wheel and your right hand to shift gears quickly. 3. Left up, right down like a seesaw: Coordinate the accelerator and clutch. Slowly release the clutch, pause slightly at the semi-engaged position, and gently press the accelerator without stepping too hard—up and down like a seesaw.
5
3
Share

Where to Adjust the Headlight Height of the Elysion?

The headlight height of the Elysion is automatically adjusted. The vehicle can automatically adjust the headlight height based on changes in light or external environment. Below is a detailed introduction to the classification of car lights: 1. Headlights - The combined headlights are located at the front of the vehicle, primarily serving the purpose of illumination and signaling. The light emitted by the headlights can illuminate the road conditions ahead of the vehicle, enabling the driver to drive safely at night. 2. Taillights - The combined taillights are located at the rear of the vehicle, mainly serving the purpose of illumination and signaling. 3. Turn signals - Used to indicate left or right turns to other road users. Regulations require them to be amber in color. 4. License plate light - Primarily illuminates the license plate, allowing people to identify the vehicle's license plate at night.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.