Where is the computer board of Volkswagen Lavida located?

2 Answers
PrestonLynn
09/02/25 5:12am
Volkswagen Lavida's computer board is located in the engine compartment, inside the black plastic box near the left front wiper. Here are some relevant details: 1. Taking the 2021 Volkswagen Lavida Comfort Edition as an example, it is a compact car with body dimensions of: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, and a fuel tank capacity of 51l. 2. The 2021 Volkswagen Lavida Comfort Edition is equipped with a 1.4t turbocharged engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum power speed of 5000rpm, and is paired with a 7-speed dual-clutch transmission.
Was this review help?
7
0
Share
LydiaDella
09/14/25 7:20am
The ECU (Engine Control Unit) of the Volkswagen Lavida is typically located in the engine compartment. Based on my years of experience in car repair, this component is primarily responsible for controlling the engine's operation. It's usually positioned at the front-left corner of the engine or below the windshield, near the firewall. The design takes into account heat dissipation and safety to prevent water damage or overheating. To locate it, simply open the hood and look for a black plastic box. However, avoid attempting to dismantle it yourself, as tampering with the circuits could cause malfunctions—it's advisable to seek professional assistance for inspection. Additionally, if your car has trouble starting or experiences a sudden increase in fuel consumption, it might indicate an issue with the ECU. Ensuring it's securely fixed in place prevents displacement, which could affect signal transmission.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

How many types of car chassis armor are there?

There are four types of car chassis armor, namely: 1. Asphalt-based chassis anti-rust glue; 2. Oil-based solvent chassis anti-rust glue; 3. Water-soluble chassis anti-rust glue; 4. Composite polymer resin paint. Car chassis armor is a high-tech adhesive rubber asphalt coating used for anti-collision, anti-rust, and sound insulation of the car chassis. The functional characteristics of car chassis armor are: 1. Chassis anti-corrosion; 2. Preventing stone impacts on the bottom plate during driving; 3. Eliminating resonance generated by the engine, wheels, and bottom plate, providing shock absorption; 4. Reducing noise generated between the vehicle and the ground during driving; 5. Preventing underbody scraping and reducing the degree of damage to the chassis.
9
4
Share

Why Do Cars Catch Fire Spontaneously?

Cars may catch fire spontaneously for the following reasons: 1. Electrical leakage: When the engine is running, the high temperature of the ignition coil can soften, age, or crack the insulation layer of the high-voltage ignition wires. This makes it easier for the high-voltage electricity to penetrate the insulation layer, leading to electrical leakage. The temperature at the leakage point continuously rises, igniting leaked gasoline from the engine or carburetor, ultimately causing a fire. 2. Grounding: Among self-ignition accidents caused by wiring faults, grounding is the primary cause. This is especially true for many new car owners who, out of affection for their newly purchased vehicles, install anti-theft devices, upgrade to high-end audio systems, or modify the car's appearance. These actions can potentially cause wiring to ground, leading to vehicle self-ignition.
3
5
Share

Which country does Venucia belong to?

Venucia is a Chinese automobile brand under Dongfeng Motor Co., Ltd. Taking the Venucia D60 as an example: The exterior dimensions are 4756mm in length, 1803mm in width, and 1487mm in height, with a wheelbase of 2700mm. It features a 50-liter fuel tank capacity, a 525-liter trunk capacity, and a front/rear track width of 1550mm, making it a 4-door, 5-seater compact sedan. The vehicle is equipped with a 1.6L naturally aspirated engine paired with a manual transmission, delivering a maximum power of 93kW and a maximum torque of 168Nm, with peak power achieved at 5600 rpm. It comes with MacPherson strut independent front suspension and a torsion beam semi-independent rear suspension.
18
2
Share

What Impact Does a Faulty Camshaft Sensor Have on a Car?

A faulty camshaft sensor can have the following impacts on a car: 1. Difficulty in accelerating; 2. Ignition problems; 3. Idling and illuminated fault light; 4. Sudden engine stalling when the car is warm. The camshaft sensor is a sensing device, also known as a synchronization signal sensor. It serves as a cylinder identification and positioning device, inputting camshaft position signals to the ECU and acting as the primary control signal for ignition. The camshaft sensor consists of a signal disk, signal generator, distributor, sensor housing, and wiring harness connector. Its functions include: 1. Timely control of the ignition system, issuing ignition commands based on the actual conditions of the cylinder; 2. Performing emergency ignition operations.
17
0
Share

Is the accelerator pedal operated by the left foot or the right foot?

The accelerator pedal is operated by the right foot. The accelerator pedal, also known as the throttle pedal, is part of the vehicle's fuel supply system. By controlling the amount of pedal depression, it regulates the opening of the engine throttle, which in turn controls the air intake. The engine control unit (ECU) then adjusts the fuel injection accordingly to control the engine speed. The throttle position is manipulated by the driver via the throttle lever in the cockpit, which transmits the command through a series of linkages, rocker arms, torque tubes, cables, pulleys, and sector wheels to the carburetor or fuel regulator on the engine. When the driver needs to accelerate, pressing the accelerator pedal sends a signal from the pedal position sensor to the ECU via a cable. The ECU analyzes, interprets, and sends commands to the drive motor, which then adjusts the throttle opening to regulate the flow of the air-fuel mixture.
14
0
Share

How to Deal with Paint Stains on a Car?

Methods to deal with paint stains on a car: 1. Use banana oil for cleaning; 2. Use gasoline for cleaning; 3. Use tar remover or adhesive remover for cleaning; 4. Use carburetor cleaner for cleaning; 5. Use car wash clay for cleaning; 6. Use fine sandpaper or a blade to remove the paint. Car paint is a protective film sprayed onto the car, which is a type of coating. The main car paint processes include: 1. Electrophoretic paint, which serves to prevent rust and corrosion; 2. Primer paint, which resists UV rays and stone chipping, providing a base for the color paint; 3. Color paint layer, which enhances aesthetics; 4. Clear coat layer, which gives the car body a glossy finish and resistance to stone chipping.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.