Where is the Comforser tire brand produced?

What is the meaning of BMW's 17-digit VIN?

The meaning of BMW's 17-digit VIN is as follows: 1. The meanings are as follows: The first digit identifies the country/region of origin: L stands for China, J stands for Japan. The second digit identifies the vehicle manufacturer. The third digit identifies the manufacturer's internal division or conventional vehicle type. The fourth digit represents the code for vehicle weight or horsepower. The fifth digit identifies the vehicle's chassis type. The sixth digit is a special code used by the manufacturer and can also identify the specific model of the vehicle. The seventh digit can be used to identify the body type. The eighth digit provides information about the engine. The ninth digit is always a check digit. The tenth digit is the model year code. The eleventh digit is the plant code, indicating the assembly plant of the vehicle. The last six digits (i.e., 12-17) are the production sequence number. 2. Additional information: Illegal characters in the VIN include O, Q, I, 0. The letter Z is invalid in the year position. The ninth digit can only be a number from 0-9 or the uppercase letter X. The last four digits must all be numbers and cannot be letters.

14

0

Share

Where is the tire pressure monitoring button for the 2018 Sagitar?

The tire pressure monitoring button for the 2018 Sagitar is located inside the glove compartment. The button features a tire pressure monitoring indicator symbol and the letters SET. The Sagitar's tire pressure monitoring system is a passive type (also known as an indirect tire pressure monitoring system, referred to as WSB in English, short for Wheel Speed Based TPMS). It does not display the actual tire pressure values but will automatically illuminate the tire pressure monitoring indicator light when abnormal tire pressure is detected. To reset the tire pressure warning light on the 2018 Sagitar, follow these steps: 1. Keep the vehicle stationary for one minute without moving it. 2. Press and hold the tire pressure reset button inside the glove compartment. 3. A confirmation sound will indicate that the tire pressure reset is complete. If the tire pressure warning light comes on, it is advisable to stop and check the tires when safe to do so. If no visible issues are found, promptly visit a 4S store or a professional auto repair shop for inspection.

16

4

Share

Does a new vehicle need to undergo inspection in the sixth year?

A new vehicle requires inspection in the sixth year. New vehicles enjoy a six-year exemption from inspection. During the first six years, in the second and fourth years, the owner only needs to complete some related procedures, which require the owner to handle them personally. In the sixth year, the owner must take the vehicle to an inspection station for an on-site inspection, and only after passing the inspection can the inspection label be obtained. Regulations regarding the annual inspection time for motor vehicles: 1. Small and micro non-operational passenger vehicles must be inspected once every two years within six years, once every year after six years, and twice every year after 15 years; 2. Operational passenger vehicles must be inspected once every year within five years and once every six months after five years; 3. Trucks and large or medium-sized non-operational passenger vehicles must be inspected once every year within 10 years and once every six months after 10 years; 4. Motorcycles must be inspected once every two years within four years and once every year after four years; 5. The annual inspection time for motor vehicles is determined based on the initial registration date of the new vehicle. For example, if the initial registration date on the vehicle's license is June 2007, the annual inspection time is every June.

2

4

Share

Why does the motorcycle emit blue smoke after changing the engine oil?

Motorcycle emits blue smoke after changing the engine oil for the following reasons: Oil level too high: First, check whether the oil level is too high, as excessive oil level can easily cause oil to rise. When checking the oil level, do not do so immediately after the engine stops. Wait for 10 minutes after shutdown before checking. If the oil level is too high, the excess oil should be drained promptly. Increased piston clearance: If the oil level is normal, for engines that have been in use for a long time, check the cylinder compression pressure and the possibility of increased clearance due to wear of the piston, piston rings, and cylinder, which can cause oil to rise. If the cylinder pressure is found to be below the specified value, further check whether the piston has carbon deposits causing it to stick, excessive wear, or loss of elasticity. If any of these conditions are present, the piston rings should be cleaned or replaced. If the cylinder liner is severely worn and the clearance between the piston and cylinder exceeds the specified value, the cylinder should be rebored, and the piston should be replaced.

5

4

Share

How many liters of engine oil should be added to the Buick LaCrosse 2.0t?

The Buick LaCrosse 2.0t requires 5.5 liters of engine oil, but at least 5 liters are needed for a gravity oil change as it cannot be completely drained. Method to check engine oil level: Park the car and turn off the engine, open the hood, locate the oil dipstick, wipe it clean with a cloth, reinsert the clean and dry dipstick, wait for three minutes, then pull it out and observe the oil level on the dipstick. Typically, the dipstick has two marks, H (High) and L (Low). If the oil level is between these two marks, it indicates sufficient oil for normal driving. Precautions when adding engine oil: Ensure that the additional oil is of the same brand and type; mixing different oils is not recommended. Additionally, opened oil bottles can be used for topping up if they are less than one year old. Oil that has been opened for over a year is generally ineffective and not recommended for use.

12

1

Share

Are new motorcycles more fuel-consuming?

New vehicles of the same model consume more fuel than those that have completed the break-in period because new motorcycles are not yet broken in, and the internal components of the engine have not been properly seated. Break-in period mileage for motorcycles: The break-in period for a newly purchased motorcycle is generally 1,500 kilometers. There are various methods for changing the engine oil within these 1,500 kilometers. It is recommended to change the oil at intervals of 300 kilometers, 600 kilometers, 1,000 kilometers, and 1,500 kilometers. This is because the meshing of gears, pushrods, or chains in a new engine generates debris, so frequent oil changes are necessary to promptly flush out such waste. Driving precautions during the break-in period: For the first 600 kilometers, avoid carrying passengers or climbing very steep slopes. Do not overwork the motorcycle. When refueling, add less fuel each time to reduce the vehicle's weight. For the first 600 kilometers, maintain the following gear speeds: first gear at 10 km/h, second gear at 20 km/h, third gear at 30 km/h, fourth gear at 35 km/h, and fifth gear at 40 km/h. Shift gears repeatedly while riding, moving from first to fifth gear and then back down to first.

5

2

Share

Where is the Comforser tire brand produced?

What is the meaning of BMW's 17-digit VIN?

Where is the tire pressure monitoring button for the 2018 Sagitar?

Does a new vehicle need to undergo inspection in the sixth year?

Why does the motorcycle emit blue smoke after changing the engine oil?

How many liters of engine oil should be added to the Buick LaCrosse 2.0t?

Are new motorcycles more fuel-consuming?

Is the Mercedes-Benz C260L four-wheel drive or two-wheel drive?

What is the minimum size of a fire truck turnaround area?

Why is there no sound when playing music after successful Bluetooth connection in Honda CRV?

Why is the Mercedes-Benz car not responding when starting?