Where is the cigarette lighter socket of the Dongfeng Nissan Sylphy?

1 Answers
VeraLee
07/30/25 10:00am
The cigarette lighter socket of the Dongfeng Nissan Sylphy is located on the center console panel, where most car cigarette lighters are positioned. The Nissan Sylphy has only one cigarette lighter socket, which is the USB port, and the original vehicle does not come with a cigarette lighter. If needed, you can request one from a 4S dealership. More details about the cigarette lighter are as follows: 1. The cigarette lighter is a component found in all cars, designed to provide a flame source for smokers, but it can also be used as an external device power source. 2. The cigarette lighter operates at a voltage of 12 volts, matching the vehicle's battery voltage. It typically has a dedicated power line connected to it, separate from other circuits, and thus has its own fuse. 3. The correct method of use is to insert and remove it vertically without shaking, as frequent wiggling during removal can cause loosening, short circuits, and damage to the fuse or external devices.
Was this review help?
2
1
Share
More Forum Discussions

How to Transfer an Out-of-Town Driver's License Back to Local?

Here are the steps to transfer an out-of-town driver's license back to local: 1. Bring the original ID card and one copy of the ID card; 2. Two latest one-inch color photos without a hat; 3. Fill out the "Motor Vehicle Driver's License Application Form" (undergo a physical examination at the driver adaptability testing station); 4. Submit the original driver's license and file for approval by the business leadership post. The clerk will unseal the file and verify whether the file materials are complete, true, and valid; 5. After online verification and passing the road driving test (Subject 3), proceed with the transfer procedures; 6. Retain the "Motor Vehicle Driver's License Application Form," "Motor Vehicle Driver's License Registration Item Form," and "Motor Vehicle Driver Transfer Notice" from the original driver's license file.
1
1
Share

What are the causes and solutions for car air conditioning not cooling?

Here are the causes and solutions for car air conditioning not cooling: 1. The air conditioning compressor belt is too loose. If you turn on the air conditioning in the car and hear a "squeaking" sound, you should pay attention - the likely cause of poor cooling is a loose compressor belt. In this case, the compressor belt needs to be tightened. Additionally, since these belts are made of rubber, they have a limited lifespan. If the belt has aged and become unusable, it needs to be replaced. 2. Insufficient refrigerant. The common refrigerant code is R134A. Insufficient refrigerant affects the cooling performance of the air conditioning system, resulting in inadequate cooling. Generally, the refrigerant operates in a relatively closed environment. However, after prolonged use of the vehicle, components in the air conditioning system may age or wear out, potentially causing refrigerant leaks and insufficient refrigerant levels.
4
0
Share

Where is the BMW 730 Air Filter Located?

BMW 730 air filter locations vary depending on the model: 1. For older BMW 730 models, the air filter is located under the windshield wipers in the engine compartment. 2. For newer BMW 730 models, the air filter is inside the glove compartment on the passenger side. Here are some relevant details: 1. Taking the BMW facelifted 730 as an example, it is a 4-door, 4-seater large sedan with body dimensions of 5273 mm in length, 1902 mm in width, 1498 mm in height, and a wheelbase of 3210 mm. 2. The BMW facelifted 730 is equipped with a 4.4T twin-turbocharged engine, delivering a maximum power of 390 kW and a maximum torque of 750 Nm. It features a front-engine, four-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link independent rear suspension.
9
3
Share

What does the 'A' symbol in a car mean?

The 'A' symbol represents the auto start-stop function. There is an auto start-stop indicator light on the car's dashboard, as well as an auto start-stop switch inside the vehicle. Both the indicator light and the switch feature the letter 'A'. Below is relevant information: 1. Many modern cars are equipped with the auto start-stop function, which can reduce exhaust emissions and save fuel. Cars with this function have an indicator light on the dashboard. If the auto start-stop system is functioning properly, the indicator light is usually green. If the system is not working correctly, the indicator light typically turns yellow or red. 2. Many car enthusiasts worry that the auto start-stop function may harm the vehicle, but there is no need for concern. The auto start-stop function only activates when the engine coolant reaches normal operating temperature and the battery has sufficient charge. The primary purpose of the auto start-stop system is not just to save fuel but to reduce exhaust emissions. With environmental protection becoming increasingly important, major automakers are employing various methods to minimize vehicle emissions.
18
2
Share

Can charging piles be installed by oneself?

Charging piles can be installed by oneself. The following are the installation steps for new energy vehicle charging piles: 1. Contact the property management company to determine the community's charging pile installation policy: Currently, the general requirement for installing a charging pile is to have a privately owned parking space. Some properties, due to being built earlier, may not be suitable for installing charging piles. If additional technical equipment is required for installation, it is essential to communicate with the property management in advance. 2. Inspect your parking space: This inspection refers to the owner personally conducting an on-site inspection. This step is very important for cost savings. Generally, there are many power distribution rooms in a community, and the owner should choose one that is close to the parking space, which can save a lot of costs during installation. 3. Provide relevant materials: Submit copies of your ID card, proof of parking space ownership (which can be issued by the property management), and a written consent from the property management to the staff. 4. On-site inspection: The power company's engineer will notify the charging pile company. At that time, the property electrician, charging pile company, power company, and the owner must all be present to determine the final construction plan. 5. Installation: After the construction plan is finalized, the installation process begins. Depending on the conditions of each community and the location of the garage, the construction time varies. Some installations may take only 2 hours, while others may require a whole day to complete. 6. Inspection: After the construction is completed, the charging pile company will report to the power company, which will then conduct an on-site inspection. The power company will produce the corresponding electricity card, and the owner can collect it from the power supply bureau.
20
4
Share

Can You Wax a Car After Crystal Coating?

You can wax a car after crystal coating. Here are the reasons why waxing is possible after crystal coating: 1. Crystal coating itself does not have waterproofing functionality; it only forms a relatively hard film on the surface of the car paint. Waxing, however, can provide a waterproof effect to the car paint. It's important to note that crystal coating has hydrophobic properties, which are sufficient for handling general rainy conditions. Unless the weather is extremely harsh, there is no need to wax the car after crystal coating. 2. Of course, if the crystal coating wears off, it's best to reapply the coating or wax the car. After all, minor scratches are inevitable over time, especially for those who frequently park their cars outdoors. Without proper protective measures, the car paint can become noticeably scratched over time.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.