···
Log in / Register

Where is the cigarette lighter located in the Tiida?

5 Answers
Londyn
07/25/25 4:00am

The cigarette lighter in the Tiida is located below the center console, marked with a cigarette symbol on a button-like component. The cigarette lighter is a standard feature in all vehicles, designed to provide a convenient ignition source for smokers. Here are some relevant details: 1. The typical maximum power capacity of a cigarette lighter is 120W. Exceeding this limit may overload the lighter, leading to potential hazards such as overheating or burning. Therefore, when using external devices, always check the maximum power rating and ensure usage remains below 120W. 2. It's important to note that some cigarette lighters remain powered even after the vehicle is turned off, so it's advisable to unplug devices when not in use. When inserting or removing devices, avoid excessive force or shaking, as this may cause poor contact during subsequent use. More severely, it could lead to a short circuit, resulting in blown fuses or damage to external devices. Always remove devices vertically to prevent such issues.

Was this review help?
14
4
Share
McChristian
08/11/25 12:11pm

The cigarette lighter in the Tiida is located in the small round recess below the center console, right in front of the gear shift. You can easily spot it by just looking down. I always use it to charge my phone when driving the Tiida—the position is super convenient, and your fingers can naturally touch the cover when shifting gears with your right hand. In newer models, the cigarette lighter might be hidden inside the center armrest; just lift the lid and glance at the lower right side. Be careful not to spill drinks into the socket—I once caused a short circuit by spilling cola, and disassembling it for cleaning was a hassle. It’s best to keep a dust plug handy since this spot tends to collect dirt, especially for snack-loving car owners. Also, remember to regularly check all power outlets in the car for wear and tear, or you might suddenly lose power and even the navigation won’t work.

Was this review help?
11
5
Share
Expand All
JoshuaMarie
09/27/25 3:37am

As a five-year owner of a Nissan Tiida, the cigarette lighter is located in the silver round hole on the center console in front of the gear lever, easily identifiable by the cigarette butt icon on the cover. Last year when I was coaching a novice driver, she couldn't find it at first until realizing the spring-loaded cover to the right of the handbrake was it. This 12V power outlet is extremely practical - besides lighting cigarettes, it can power car vacuum cleaners. However, using high-power devices with the heater on in winter may blow the fuse. I recommend avoiding simultaneous use of dash cams and power banks, having learned this the hard way when I had to visit a repair shop for fuse replacement. The position is ergonomically designed - easily reachable without arm stretching, far more reasonable than some cars that place it inside the glove compartment.

Was this review help?
10
0
Share
Expand All
LaBrody
11/10/25 5:37am

The cigarette lighter in the Tiida is located below the center console air conditioning panel, which is the round socket with a metal cover. Recently, I helped my neighbor aunt find it—she thought it was a standalone lighter, but in fact, modern car cigarette lighters are all integrated power sockets. It's positioned near the driver's knee, and you can see it by bending down from the driver's seat, though it might be less noticeable in dark interior models. It can be used to connect emergency equipment like air pumps, but the cigarette lighter socket has a self-locking mechanism, so inserting or removing requires some finesse—applying too much force may break the clip. Remember to wait three minutes after turning off the engine before using it to protect the vehicle's electrical system.

Was this review help?
15
4
Share
Expand All
Jon
12/31/25 7:22am

The cigarette lighter is located about ten centimeters in front of the Tiida's gear lever, with a lightning symbol on the metal cover. Last week, my cousin borrowed my car for a road trip and called saying he couldn't find it. Later, through a video call, he discovered it was hidden to the left of the cup holder. This design is much more convenient than the old Sunny model, eliminating the need to bend over to reach the passenger seat. Actual measurement shows the socket depth is about 4 cm, so when buying an adapter, choose one with a spring clip. I once bought a low-quality product that caused poor contact. As a reminder, for models with a USB port next to the cigarette lighter, it's better to use the USB for charging to avoid overloading the 12V socket. When not in use for extended periods, remember to close the dust cover tightly, as sand and dust can cause oxidation of the contact points.

Was this review help?
3
0
Share
Expand All
More Forum Discussions

What Causes a Gasoline Car to Emit Black Smoke?

When a car emits black smoke, it is often due to uneven or excessive fuel supply from the high-pressure fuel pump across the cylinders. This can cause unstable engine speed and intermittent black smoke emissions. The issue should be addressed by adjusting the fuel supply to achieve balance or keep it within the specified range. Additionally, malfunctioning or damaged fuel injectors can lead to insufficient fuel atomization, resulting in black smoke. In such cases, the injectors need to be inspected and replaced. Below are the reasons and solutions for a car emitting black smoke: 1. Check if the air filter is clogged, if there is any leakage in the intake pipe (which may cause the engine to produce a sharp whistling sound under increased load), or if the turbocharger is damaged. 2. The solution involves inspecting whether the turbine wheel and compressor wheel blades are damaged and ensuring they rotate smoothly and flexibly.
1
4
Share

What is the ground clearance of the Zotye Z500?

The minimum ground clearance of the Zotye Z500 is 15cm. The Zotye Z500 is a mid-size car featuring a popular integrated lower grille design. The entire lineup is equipped with a 1.5-liter turbocharged engine, paired with either a 5-speed manual transmission or a CVT transmission. The front suspension of the Zotye Z500 utilizes a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The torsion beam suspension has a simple structure and occupies minimal space, allowing for expanded rear passenger space and trunk capacity.
12
3
Share

What brand of tires does the Boyue use?

The Boyue uses two types of tires. The mid-to-low trim models are equipped with Giti Comfort-SUV520 tires, while another option is the Cooper Discoverer-HTS tires. Both tires share the same size: 225/65-R18. Here are the details: 1. The Giti Comfort SUV520 is a high-performance SUV tire that balances handling, comfort, and safety. It features 3B stiffness balancing technology, combined with an optimized shoulder tread block and transverse groove configuration, ensuring even tread contact pressure distribution for improved handling stability and grip performance. The use of high-grip synthetic rubber with nano-reinforced carbon black and high-performance silica materials, along with four wide longitudinal grooves on the tread, effectively enhances wet braking performance, reduces braking distance, enables rapid water drainage at high speeds, and improves tire grip. 2. The Cooper Discoverer-HTS is a tire developed for mid-to-high-end urban SUV models and is the most affordable option in Cooper's urban SUV tire lineup. This tire emphasizes handling comfort and quiet performance, excelling in both handling and comfort/noise reduction, making it a well-balanced SUV tire.
13
1
Share

Why Does the Car Clutch Become Lower?

Reasons why a car clutch becomes lower: 1. There is air inside the clutch system, or leakage in the clutch master or slave cylinder; 2. The clutch cable is low, and there is an adjusting screw at the front end of the clutch cable—sometimes if it loosens, the clutch becomes lower; 3. The impact of a low car clutch: if adjusted too low, it can affect the separation gap, causing the car to start in a semi-clutch state, leading to clutch wear, and making gear shifting difficult. The clutch functions like a switch, engaging or disengaging power transmission. The clutch mechanism allows the driving and driven parts to temporarily separate and gradually engage, with the possibility of relative rotation during transmission. A rigid connection cannot be used between the driving and driven parts of the clutch.
8
1
Share

Reasons for Detected Misfire in Cylinder 4 (P0304)

p0304 detected misfire in cylinder 4 can be caused by the following reasons: 1. Spark Plug: Poor spark plug firing. 2. Piston Ring: Damaged piston rings leading to low cylinder pressure. 3. Ignition Coil: Internal damage to the ignition coil. 4. Timing Mechanism: Incorrect timing or skipped teeth in the timing mechanism. 5. Engine: Engine computer damage or fault code issues. The troubleshooting methods are: Check the cylinder pressure of each cylinder to ensure it is normal; most vehicles have a cylinder pressure of around 1300 kPa. Address any cylinders with abnormal pressure. Inspect the spark plug firing condition, the size of the free gap, whether the ceramic area has cracks, and if it has been punctured. Replace any damaged spark plugs. Check if the timing marks on the timing belt or timing chain align correctly. If misaligned, disassemble the timing mechanism and realign the timing marks. Try replacing the ignition coil to see if the issue is resolved.
18
4
Share

What to Do When the Braking System Malfunctions?

Solutions for braking system malfunctions: 1. If you notice that the brake pedal does not rise when pressed and there is no resistance, check if the brake fluid is low and top it up promptly. It could also be due to a malfunction in the brake wheel cylinder, pipelines, or connectors, which requires repair. 2. If the braking effect is poor when the brake pedal is pressed all the way down or during continuous braking, it indicates the presence of air in the braking system, necessitating bleeding. 3. If the pedal position is very low and does not rise after being pressed, and it feels stiff, this is caused by a blockage in the master cylinder, which needs to be cleared.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.