Where is the cigarette lighter located in the old Buick GL8?

1 Answers
LondonMarie
07/29/25 9:42pm
The cigarette lighter in the old Buick GL8 is located next to the center console cup holder. Press the handle, and the cigarette lighter will start heating. Cigarette lighter voltage in cars: The voltage is 12 volts, and the general current for a cigarette lighter is 10 amperes. The maximum power is 120 watts. The cigarette lighter socket can also be expanded to a USB interface, allowing for charging mobile phones simultaneously. The cigarette lighter is a standard component in all cars, providing a convenient fire source for drivers who smoke. Essentially, a cigarette lighter is a device used for lighting cigarettes. Precautions for using car cigarette lighters: Be sure not to exceed the maximum load of the cigarette lighter. Avoid overloading electrical devices and drawing power when the engine is off. When using a car inverter, the output through the cigarette lighter typically comes in power specifications such as 20 watts, 40 watts, 80 watts, 120 watts, and 150 watts. It's advisable not to exceed 120 watts for the maximum power of the electrical device. Do not continue to draw power from the cigarette lighter socket when the vehicle is turned off, as this can easily deplete the battery, making it impossible to restart the car. If the power of the car electrical device is too high and causes a circuit overload, the battery may be damaged.
Was this review help?
6
4
Share
More Forum Discussions

What is the actual speed when the speedometer shows 80?

The actual speed when the speedometer shows 80 is approximately 75 kilometers per hour. The speedometer is used to display the vehicle's traveling speed, with units in miles per hour or kilometers per hour. The measurement of vehicle speed is achieved through speed sensors, and the car's speed is closely related to the wheel radius and axle structure. Reasons for the speedometer fluctuating during driving: 1. Charging circuit malfunction: If the battery cannot charge or is undercharged, the engine ECU will increase the engine speed to allow the generator to charge the battery, causing the speedometer to fluctuate during driving; 2. Throttle malfunction: A faulty throttle can alter the engine's air intake; 3. PCV valve or carbon canister solenoid valve malfunction: When the valve body fails, the fuel entering the combustion chamber will deviate from the ECU's settings, leading to fluctuations in the speedometer during driving.
19
0
Share

What is the method to reset the maintenance light for the 2019 Lingpai?

The method to reset the maintenance light for the 2019 Lingpai is: Turn off the ignition switch, then press and hold the trip meter reset button on the car's dashboard. The 2019 Lingpai is a compact car with the following dimensions: length 4756mm, width 1804mm, height 1509mm, wheelbase 2730mm, fuel tank capacity 40L, and curb weight 1266kg. The 2019 Lingpai features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.0L turbocharged engine, producing a maximum horsepower of 122PS, maximum power of 90kW, and maximum torque of 173Nm, paired with a 6-speed manual transmission.
1
0
Share

What Causes a New Tire to Slowly Lose Air?

The reasons for a new tire slowly losing air are: 1. Foreign objects puncturing the tire: Punctures from foreign objects are the most common type of tire damage. Items that easily puncture tires include nails, screws, wires, glass shards, sharp stones, and tile fragments; 2. Damage to the tire sidewall and inner edge: Besides the tire tread being vulnerable to hard objects, the sidewalls and inner edges are also weak points; 3. Damaged tire valve stem: If no abnormalities are found on the tire, the owner can shift their attention to the valve stem. Most household vehicles are equipped with tubeless tires, where the valve stem is mounted on the rim and is mostly made of rubber. Over time, the rubber valve stem, exposed to sunlight, rain, and internal tire pressure, will gradually age, become brittle, and eventually crack, leading to air leakage.
9
2
Share

How to Clear the Anti-Skid Malfunction Light?

The steps to clear the anti-skid malfunction light are: restart the engine and briefly press the ESP OFF button on the vehicle. The reasons for the anti-skid malfunction light to illuminate are as follows: 1. Accidentally pressing the ESP OFF button. 2. Loose or faulty sensor connectors. 3. Short circuit in the wiring or related fuse blown. 4. Software issues causing poor signal transmission. 5. ABS pump failure. The anti-skid system, also known as the vehicle stability system, is a chassis braking technology developed based on the anti-lock braking system (ABS). It mainly consists of a control unit, steering sensor, wheel speed sensor, skid sensor, lateral acceleration sensor, etc. It enables automatic vehicle safety control, effectively improving the driving stability and safety of the vehicle under dynamic conditions such as braking, acceleration, and steering.
3
5
Share

What are the charging methods for new energy vehicles?

New energy vehicle charging methods: 1. Portable charging; 2. Home charging station charging; 3. Public charging station charging. Portable charging: Generally comes with electric vehicle purchases. New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving aspects, forming automobiles with advanced technical principles, new technologies, and new structures. New energy vehicles include four major types: hybrid electric vehicles (HEV), battery electric vehicles (BEV, including solar-powered vehicles), fuel cell electric vehicles (FCEV), and other new energy (such as supercapacitors, flywheels, and other high-efficiency energy storage devices) vehicles. The promotion of new energy vehicles is aimed at addressing environmental protection and petroleum crisis needs, reducing or abandoning the combustion of traditional gasoline or diesel to drive internal combustion engines.
6
2
Share

What is the method to retrieve a card that has fallen into the car door?

The methods to retrieve a card that has fallen into the car door are: 1. Use a wire to hook out the card that has fallen under the door; 2. Remove the door panel to retrieve the card. The car door provides access for the driver and passengers, isolates external interference, and to some extent protects the occupants from side impacts. Car doors can be categorized by their opening methods into: 1. Forward-opening doors; 2. Reverse-opening doors; 3. Sliding doors; 4. Upward-swinging doors; 5. Folding doors; 6. One-piece doors; 7. Split doors. The design requirements for car doors include: 1. The maximum opening angle should be controlled between 65 to 70 degrees; 2. During the opening process, there should be no positional interference with other parts.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.