···
Log in / Register

Where is the cigarette lighter located in the Magotan?

4 Answers
DeCarlos
07/30/25 12:51am

The cigarette lighter in the Magotan is located below the center console. Here is some relevant information about the cigarette lighter: 1. Overview: The cigarette lighter is a device in a car. In the traditional sense, the cigarette lighter draws power from the car's electrical system to heat a metal heating element, such as a heating plate or wire, to provide a flame source. With the development of automobiles and changing consumer needs, the cigarette lighter socket can often be equipped with a car inverter to charge mobile electronic devices, among other uses. The central spring-loaded contact in the socket is the positive pole, while the side clips are the negative poles. The power supply is directly connected to the car battery, with the same current and power output as the battery. 2. Precautions: Due to prolonged use and repeated insertion and removal, the spring clips may loosen, preventing the cigarette lighter from locking in place when pressed, which means it won't heat the heating element. Another issue is that repeated plugging and unplugging, as well as improper use, can cause a short circuit in the wiring, blowing the fuse.

Was this review help?
9
2
Share
Winter
08/15/25 6:15am

I've been driving for over 20 years and have memorized the cigarette lighter positions of various car models. The typical location of the Volkswagen Magotan's cigarette lighter is in the central area of the center console, right below the gear shift lever. The design is very user-friendly, allowing easy access to that round socket with just a reach. This area tends to accumulate dust or dirt, so I recommend regularly cleaning the contacts with a soft cloth to prevent oxidation from affecting power conductivity. The cigarette lighter isn't just for lighting cigarettes; it's more commonly used for connecting phone chargers. However, avoid connecting high-power appliances like mini fridges, as they can easily blow the fuse. The car's fuse box is located either below the steering wheel or in the engine compartment, with numbered positions for quick reference and replacement according to the manual. The layout follows standard automotive styling. If the position has changed, it might be due to previous wiring modifications during repairs, requiring a careful search. Maintaining the cigarette lighter is simple—just wipe it regularly during daily use to avoid oil contamination that could cause short-circuit issues.

Was this review help?
4
1
Share
Expand All
VonConnor
10/20/25 3:42am

In everyday driving, the cigarette lighter position is just like my friend's Magotan, located in the middle of the center console, next to the gear lever. You can plug in devices by finding the small socket. The position is very convenient, allowing operation without bending over. I often use it for phone charging or powering navigation devices. If it stops working, it's mostly due to a blown fuse, which can be replaced for just a few dollars—the fuse box is located near the cockpit. The design is quite thoughtful, though sometimes it can get blocked by clutter, so remember to check regularly to prevent dust buildup from affecting contact. For safety, don't let children touch it randomly—while the 12V voltage isn't highly dangerous, water splashes could cause issues. Most cars have a similar position, and the Magotan is no exception—it's easy to use without compromising the aesthetics of the space.

Was this review help?
11
1
Share
Expand All
MacJohn
12/03/25 4:13am

From an electrical perspective, the cigarette lighter is typically located in the driver's safety zone. In the Magotan, it's positioned near the gearshift lever as a small socket under the center console panel, with a standard voltage of 12V. Its placement avoids interference with steering operations. When connecting devices, be mindful of power limitations to prevent fuse burnout. The related circuit has protective designs and stable positioning—avoid unauthorized modifications that could compromise safety features. Safety first: keep contact surfaces clean to prevent corrosion and short circuits.

Was this review help?
18
4
Share
Expand All
More Forum Discussions

What are the hazards of glazing?

After a vehicle undergoes glazing treatment, other beauty treatments cannot be used to protect the paint surface, and only glazing can be continuously applied. Explanation: Glazing involves covering the car's paint surface with a layer of glaze, whose main components are derived from petroleum. Through the high-speed vibration and friction of a polishing machine, the glaze penetrates into the paint to form a protective layer, effectively safeguarding the paint. Benefits of glazing: The non-stick properties of glaze make the paint surface less prone to contamination, keeping it clean. After glazing, the glaze layer increases the hardness and brightness of the paint surface, effectively protecting it from minor scratches. It also provides some resistance to temperature effects on the paint, along with UV protection, acid rain resistance, oxidation resistance, anti-static properties, corrosion resistance, and wash durability. It effectively reduces the roughness of the paint surface, minimizes friction with the external environment, and better protects the paint.
10
2
Share

Can Motorcycle Tubeless Tires Get Damaged?

Tubeless tires won't leak air as long as puncturing objects are not removed. Advantages and disadvantages of tubeless tires: Tubeless tires are more durable than traditional pneumatic tires, making them more suitable for long-distance and high-speed driving. They offer better dynamic balance performance and improved driving comfort. However, poor quality, damaged tire casings, weak sidewalls, and low lateral tolerance can lead to reduced load capacity, potentially causing some tires to lose air suddenly. Tubeless tires: Except when punctured, tubeless tires generally do not deflate on their own. Therefore, it's essential to use a pressure gauge to check and maintain the required pressure during inflation, rather than relying on the feel of regular tires to determine if inflation is needed. The chassis is specifically designed to accommodate jacks and clamps in appropriate positions. Then, by using a torque wrench in a counterclockwise direction, the nuts can be loosened at an angle to replace the tire. When using sharp objects with tube tires, avoid punctures, stabs, and contact with acids, alkalis, or oil stains, as these can accelerate rubber degradation.
10
0
Share

Why does the automatic transmission keep staying in third gear?

It may be caused by internal failure of the gear shift assembly preventing gear engagement. Transmission module abnormality: This could be due to a malfunction in the transmission's internal control module. Another possible cause is a faulty gear position switch in the transmission. While depressing the clutch pedal again, quickly shift the transmission into a lower gear (these two actions should be performed simultaneously). As you press the accelerator pedal, slightly faster lift the clutch pedal. Shifting techniques: Avoid incomplete gear shifting - forcing the gear lever when shifting incompletely can easily damage gears. This not only damages components but may also lead to vehicle accidents. After moving the gear lever to neutral, avoid rocking it back and forth. Many people habitually rock the gear lever after shifting to neutral, unaware that the unstable neutral position can cause wear on components like shift forks.
1
0
Share

Do You Need to Replace the Oil Filter When Changing Motorcycle Oil?

Replacing the oil filter is not mandatory when changing motorcycle oil. Oil Filter: The oil filter, also known as the oil filter element, does not need replacement if it uses a mesh screen. The oil filter is designed to remove impurities such as dust, metal particles, carbon deposits, and soot from the oil, thereby protecting the engine. Oil filters can be categorized into full-flow and bypass types. A full-flow filter is connected in series between the oil pump and the main oil passage, filtering all the lubricating oil entering the main passage. A bypass filter, on the other hand, is connected in parallel with the main oil passage and only filters a portion of the oil delivered by the pump. Cleaning and Replacement Intervals: The air filter should be cleaned or replaced based on the motorcycle model and road conditions. For scooters, it is recommended to clean the filter every 1,000 kilometers and replace it every 3,000 kilometers. If road conditions are poor, these intervals should be shorter. For standard motorcycles, cleaning is generally required every 5,000 kilometers, making maintenance more convenient.
2
2
Share

What is the speed limit during heavy rain?

When driving in rainy conditions, the speed should not exceed 60 kilometers per hour. Damage to the vehicle body: Driving in heavy rain can cause damage to the vehicle. After being soaked in the rain, water not only remains on the surface of the vehicle but also seeps into the gaps beneath the body. While driving in the rain, mud and dirt from the road can also splash into these gaps. When rainwater mixes with this dirt, it forms sticky residues that adhere to the gaps and hide in hard-to-reach areas. If not cleaned properly, this can lead to rust on the vehicle body. Engine stalling in the rain: If the car stalls while driving in the rain, do not attempt to restart it immediately. If the water level has submerged the exhaust pipe when the car stalls in water, restarting the engine can cause water to be sucked into the engine, leading to hydro-lock and severe engine damage. In such cases, the engine may need to be replaced entirely rather than repaired. Always remember: if the car stalls in water, do not attempt to restart it a second time.
11
0
Share

What is the problem when the Geely Boyue suddenly stalls and fails to start?

Geely Boyue fails to start possibly due to damaged spark plugs. Battery dead or faulty: In low temperatures, the battery's output power decreases due to increased electrolyte viscosity, reduced permeability, and heightened resistance, making it difficult for the starter to drag the engine and reach the minimum starting speed, affecting engine ignition. Check the battery voltage with a multimeter or directly test with a new battery. Insufficient fuel: Discovering no fuel in the car due to incorrect dashboard display. Some vehicles have inaccurate fuel gauge pointers; when the fuel warning light comes on, promptly add fuel. Otherwise, the vehicle may struggle to start, especially in winter when temperatures are very low. You can press the fuel pipe while starting to feel for fuel pressure.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.