Where is the cigarette lighter in the Baojun RC6?

1 Answers
MaggieDella
07/30/25 10:03am
The cigarette lighter in the Baojun RC6 is located inside the center armrest box. Introduction to the cigarette lighter: The cigarette lighter is a device in a car. In the traditional sense, the cigarette lighter draws power from the car's electrical system to heat a metal heating element or wire, providing a flame source for lighting cigarettes. With the development of automobiles and changing consumer needs, the cigarette lighter socket can often be equipped with a car inverter to charge mobile electronic devices, among other uses. The center elastic contact of the socket is the positive pole, while the side clips are the negative poles. The power supply is directly connected to the car battery, with the same current and power output as the battery. Maintenance of the cigarette lighter: Adjust the angle of the retaining spring so that it can lock the cigarette lighter in place and allow it to heat properly. Avoid setting the angle too wide, as this may affect the insertion and removal of the cigarette lighter.
Was this review help?
19
1
Share
More Forum Discussions

Where is the clutch in a manual transmission?

All motor vehicles follow international conventions in pedal placement design. The clutch pedal is located on the left side and is operated by the left foot, the brake pedal is in the middle, and the accelerator pedal is on the right side—both operated by the right foot. In China, all manual transmission cars have the clutch, brake, and accelerator pedals positioned below the left side of the driver's cabin, arranged from left to right as clutch, brake, and accelerator. Here are manual transmission operation tips: Step 1: Press the clutch and release the accelerator. This step may cause a jerking sensation, which occurs due to incorrect sequence—if the accelerator is released before pressing the clutch, the engine stops fueling while the clutch remains engaged, potentially causing "engine braking" or a "jerking" sensation. Step 2: Shift gears. This is the core step in the shifting process. Normally, due to the synchronizer's function, the two gears to be engaged won't contact until their speeds synchronize, preventing gear clash. Once synchronized, the gears engage smoothly, so this step typically doesn’t cause any jerking. Step 3: Release the clutch and press the accelerator. This is the stage most prone to jerking. Controlling the clutch release is crucial, involving two key aspects: the timing of releasing the clutch and the manner of doing so.
5
5
Share

What is the reason why the Audi A6 does not respond when starting?

The reason why the Audi A6L does not respond when starting is: the ignition switch is not in place or is damaged, or the wire from the ignition switch to the starter relay is disconnected. You can go to an Audi 4S store to replace the ignition switch. More information about the ignition switch is as follows: 1. The ignition switch is a crucial switch in the car's circuit, regulating various circuit components of the car. It can automatically turn on or off the ignition coil and generally has 4 positions. When the ignition switch malfunctions, the car cannot start normally. Its main function is to lock the steering wheel and connect the ignition instrument indicator light. 2. A malfunctioning ignition switch can cause serious consequences, and the malfunction is likely due to the driver's long-term improper operation. If instant power is applied, it can cause a load on the car's battery, and over time, it will affect the car's ignition switch, leading to malfunctions.
20
0
Share

Where is the rearview mirror heating button on the MG5?

The rearview mirror heating switch on the MG5 is located on the air conditioning control panel, marked by a rectangular button with a wavy line. The rearview mirror heating function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thus reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as there is a control button on the driver's side. Principle of the rearview mirror heating function: After rotating the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees. The heat is then distributed to both left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively clearing the mirror of frost and mist. However, if the rainfall is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the car is running. Avoid activating the rearview mirror heating while the car is stationary to prevent draining the battery and potentially leaving insufficient power to start the car. Other methods for defogging rearview mirrors include: Opening windows for air convection: Slightly open both side windows to allow air exchange between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also help by blowing warm air to defog the mirrors.
12
1
Share

What is the solution for Honda CR-V P2647?

Honda CR-V P2647 solution is as follows: The Honda P2647 trouble code means the A rocker arm actuator system is stuck in the open position. You need to open the valve cover to check if the VTEC is stuck or malfunctioning, and replacing the solenoid control valve can solve the problem. Extension: 1. In the variable valve timing system, the rocker arm is a device connecting the camshaft and the valve. The electronic control module can adjust the angle of the camshaft by changing the oil pressure to the rocker arm actuator to ensure that the valves open and close at the optimal time, thereby optimizing the engine's efficiency and power across all speed ranges. 2. The normal working state of the VTEC system is that the VTEC solenoid valve is not working, the mechanical valve is not activated, the oil pressure sensor does not detect oil pressure, and the intake valve is driven by the rocker arm connected to the normal intake camshaft.
6
3
Share

What does SVS mean when displayed on the car dashboard?

When the SVS light appears on the car dashboard, it indicates the engine fault warning light, which is shaped like an engine. This light will illuminate when the ignition key is turned on and should turn off after the vehicle starts. If the engine ECU detects a fault, the SVS light will remain on. If it lights up while driving, it means there is an issue with the vehicle's engine. The SVS fault indicator is a warning light that appears when the ECU (Engine Control Unit) or TCU (Transmission Control Unit) of an electronically fuel-injected vehicle detects problems with the engine or automatic transmission. All electronically fuel-injected cars have an SVS fault indicator—manual transmission vehicles show it as an engine fault light, while automatic transmission vehicles display it as both an engine and automatic transmission fault light. It is recommended to visit a repair shop for inspection as soon as possible.
13
2
Share

When did the Shanghai National V emission standard come into effect?

Shanghai's National V emission standard was implemented on May 1, 2014. Starting from April 30 (excluding the 30th), Shanghai began to implement the fifth phase of the national motor vehicle emission standard in advance, while ceasing the registration of National IV standard vehicles. However, there are three exceptions for National IV standard vehicles purchased by users before April 30. Starting from May 1, the registration of National IV standard vehicles will be discontinued, except for vehicles meeting one of the following three conditions: 1. National IV vehicles purchased by users on or before April 30. 2. National IV vehicles in stock that have been registered with the local environmental protection department and for which a sales contract was signed or a unified motor vehicle sales invoice was issued on or before April 30. 3. National IV vehicles transferred from other provinces to Shanghai on or before April 30, with the registration time (including transfers from other provinces) subject to the acceptance time of the local public security vehicle management department.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.