Where is the cigarette lighter in BYD Qin?

Can vehicles undergo annual inspection in other regions?

Currently, the traffic management authorities have fully implemented cross-provincial inspection services for small cars, trucks, and medium-sized buses. Applicants can directly undergo inspection in provinces other than the vehicle's registration location and obtain the inspection qualification mark without needing to apply for an entrusted inspection procedure. However, large passenger buses and school buses cannot be inspected in other regions and must return to the vehicle's registered location for inspection. Annual inspection process: Check whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether the main assemblies have been replaced and match the initial inspection records; whether the vehicle's braking performance, steering control, lights, exhaust, and other safety performance meet the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles". Check whether the vehicle has been modified, remodeled, or transformed; whether the driving license, license plate, and all vehicle file registrations match the actual condition of the vehicle and whether any changes have been made; whether approval and change procedures have been completed. Check whether the license plate, driving license, and the enlarged license plate print on the vehicle are damaged, altered, or unclear, and whether replacement is needed. For large vehicles, check whether the unit name or the name of the street, township, or town where the vehicle is located and the maximum number of passengers allowed in the driver's cabin are printed in Chinese imitation Song font on both sides of the door as required. For trucks, check whether the rear fender (including the trailer's rear fender) has the vehicle number printed in 2~3 times larger size as required; for individual or joint-operation vehicles, check whether the word "individual" is printed on both sides of the door. The print must be clear, and printing unit codes or other patterns is not allowed (special cases require approval from the vehicle management office).

5

Share

What procedures are required for changing the vehicle frame number?

To change the vehicle frame number, the vehicle owner or their agent must submit the following documents and present the vehicle for inspection within ten days after the change: "Application Form for Vehicle Modification/Registration", the original identity proof of the vehicle owner, the vehicle registration certificate, the vehicle license, and the vehicle inspection record form. If the process is handled by an agent, the original and a copy of the agent's identity proof must also be submitted, along with the original and a copy of the handler's identity proof, and a written authorization from the vehicle owner. The vehicle management office should, within one day of acceptance, verify the vehicle, review the submitted proofs and certificates, annotate the modification on the vehicle registration certificate, reclaim the vehicle license, and reissue a new vehicle license. For the modification registration items specified in Article 10, Paragraph 1, Items (3), (4), and (6) of these regulations, the vehicle management office must verify the vehicle identification number imprint. Article 16 of the "Road Traffic Safety Law of the People's Republic of China" prohibits any unit or individual from engaging in the following activities: Assembling a motor vehicle or altering the registered structure, construction, or characteristics of a motor vehicle without authorization. Changing the model number, engine number, frame number, or vehicle identification number of a motor vehicle. Forging, altering, or using forged or altered motor vehicle registration certificates, license plates, vehicle licenses, inspection qualification marks, or insurance marks. Using the registration certificate, license plate, vehicle license, inspection qualification mark, or insurance mark of another motor vehicle.

15

3

Share

What is the maximum wading depth of the Tiguan?

The maximum wading depth of the Tiguan is 580mm. The wading depth of the Tiguan is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Tiguan is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in the water, which could cause severe damage due to water entering the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. For roads prone to water accumulation, observe warning water level markers, trees, or other reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.

3

4

Share

What engine does the Hongqi H7 use?

Hongqi H7 is equipped with engines independently developed by China FAW Group, with model numbers CA6GV and CA4GC20T. The relevant introductions of CA6GV and CA4GC20T are as follows: 1. As a high-end V6 engine, CA6GV adopts VIS variable volume chamber and variable length plastic intake system, combined with VVL technology, ensuring advanced fuel economy and ultra-low emission levels. The perfect combination of an advanced two-stage three-layer silent chain drive timing system and low-noise optimized design creates an extremely quiet experience. 2. CA4GC20T achieves technological breakthroughs in overall layout, structural strength, vibration and noise, fuel supply system, and vehicle matching. The leading multi-point electronic injection and turbocharged intercooling technology significantly enhance horsepower output and fuel utilization while greatly reducing exhaust emissions.

14

2

Share

How to Charge New Energy Vehicles Without Damaging the Battery?

Use the original charger for charging and unplug it immediately after it is fully charged. Here is more information about new energy vehicles: 1. Introduction: New energy vehicles refer to vehicles that use unconventional vehicle fuels to provide power. They can be divided into four main types: pure electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, and other new energy electric vehicles. The advantage they can achieve is zero tailpipe emissions. 2. New energy vehicle license plates: Small new energy vehicle license plates are gradient green, while large new energy vehicle license plates are yellow-green dual-color. Compared to traditional vehicle license plates, new energy vehicle license plates have one more digit, which can effectively distinguish vehicle license plates and avoid duplication.

7

5

Share

Can the car start and drive if water enters the exhaust pipe?

If water enters the exhaust pipe, the car can still start and drive. Here is an introduction to car engines: 1. Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy. 2. History: The first external combustion engine was invented by R. Stirling in the UK (Scotland) in 1816, which was later improved by Watt into a steam engine. 3. Applications: Engines can be used as power generation devices or refer to the entire machine including the power unit (e.g., gasoline engines, aircraft engines). Types include internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), gas turbines (used in racing cars), electric motors, etc.

12

5

Share

Where is the cigarette lighter in BYD Qin?

Can vehicles undergo annual inspection in other regions?

What procedures are required for changing the vehicle frame number?

What is the maximum wading depth of the Tiguan?

What engine does the Hongqi H7 use?

How to Charge New Energy Vehicles Without Damaging the Battery?

Can the car start and drive if water enters the exhaust pipe?

What Do the Blue and Red Colors Represent in Car Air Conditioning?

How Deep Water Can New Energy Vehicles Pass Through?

How to steer when reversing to the right side is wide?

Why does the car's air conditioning have no wind in gears 1-3 but has wind in gear 4?