Where is the cigarette lighter fuse located in the Peugeot 301?

Which factory produces Hanteng cars?

Hanteng cars are produced by Jiangxi Hanteng Automobile Co., Ltd. Established in November 2013, Jiangxi Hanteng Automobile Co., Ltd. is a vehicle manufacturing enterprise specializing in both traditional fuel vehicles and new energy vehicles, located in Shangrao City, Jiangxi Province. Here is more information about Hanteng: 1. Exterior: The Hanteng X5 features a stylish and dynamic design overall. The front of the car adopts a hexagonal large-size grille design, while the side profile incorporates a floating roof design, giving it a more youthful appearance. 2. Dimensions: The car measures 4501mm in length, 1820mm in width, and 1648mm in height, with a wheelbase of 2600mm, offering impressive space performance, including a rear legroom of 935mm. 3. Features: The Hanteng X5 comes equipped with advanced technologies such as wireless phone charging, LDW lane departure warning, PM2.5 air purification system, as well as a TFT electronic LCD instrument panel, 8.8-inch floating central control screen, and 360° panoramic view. 4. Powertrain: The Hanteng X5 offers two engine options: a 1.5L engine and a 1.5T engine. The 1.5L engine delivers a maximum power of 82kW (112PS) and a maximum torque of 150N·m, paired with either a 5-speed manual or CVT transmission. The 1.5T engine provides a maximum power of 115kW (156PS) and a maximum torque of 215N·m, also paired with a 5-speed manual or CVT transmission.

11

2

Share

What is the tire size for the BMW 5 Series?

The BMW 5 Series has two tire sizes: 245/45R18 and 245/40R19. In 245/45R18, the first number 245 represents the tire width of 245MM, 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, 18 stands for the rim diameter of 18 inches, and the letter "R" in the middle denotes a radial tire. In 245/40R19, the first number 245 represents the tire width of 245MM, 40 indicates the aspect ratio of the tire section is 40%, meaning the section height is 40% of the width, 19 stands for the rim diameter of 19 inches, and the letter "R" in the middle denotes a radial tire. The BMW 5 Series tires feature a dual-tone, five-spoke wheel design, and the tire brands include Pirelli, Bridgestone, Michelin, etc. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be under the vehicle, check and ensure the jack is perpendicular to the ground; Remove the hubcap, loosen the nuts counterclockwise, do not fully loosen them, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data marked on it: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".

5

0

Share

Why Do Luxury Cars Require 95 Octane Gasoline?

Luxury cars use 95 octane gasoline to prevent engine knocking. 95 octane gasoline has strong anti-knock properties and will not ignite under high pressure, ensuring the engine operates at the optimal ignition timing without affecting power output. The specific reasons are as follows: Gasoline is fundamentally related to the engine's compression ratio. Higher compression ratios result in greater power and efficiency but lower stability, necessitating gasoline with high anti-knock properties. Using 95 octane gasoline enhances performance. It has a higher octane rating than 92 octane gasoline, improving low-speed performance in gasoline engines. 95 octane gasoline ensures engine stability. Higher-octane gasoline is more stable. If a car designed for 95 octane uses 92 octane, it may lead to increased fuel consumption, reduced power, and even trigger the engine warning light in severe cases. Besides checking the recommended gasoline grade in the car's manual, you can also find it on the fuel cap. Typically, the gasoline grade can be determined by the engine's compression ratio: cars with a compression ratio between 8.6-9.9 should use 92 octane, those between 10.0-11.5 should use 95 octane, and higher compression ratios require 98 octane. However, with modern technologies, compression ratio alone may not dictate the gasoline grade, as factors like ignition timing, turbocharging, and Atkinson cycle technology also play a role. Generally, higher-octane gasoline has a higher octane rating and better anti-knock properties. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline grade is harmless if corrected afterward, but prolonged use can have the following effects: Using higher-octane gasoline in a car designed for lower octane won't cause damage, but the increased octane may alter the fuel's ignition point, leading to delayed combustion, reduced engine power, and lower thermal efficiency. Using lower-octane gasoline in a high-octane car can cause engine knocking. The lower octane reduces the ignition point, causing premature ignition during the compression stroke. This creates resistance, making the engine run unstably. Mild knocking increases noise without significant damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to engine failure.

2

5

Share

What is the real fuel consumption of the Magotan 380?

The Magotan 380 has 8 models currently on sale. Among them, the 2020 280TS-DSG Comfort and Leading models, equipped with a 150-horsepower engine, have an NEDC fuel consumption of 5.8L per 100km. The 2020 330TSI-DSG Leading, Luxury, and Premium models, equipped with a 186-horsepower engine, have an NEDC fuel consumption of 6.3L per 100km. The 2020 380TSI-DSG Luxury, Flagship, and Premium models, equipped with a 220-horsepower engine, have an NEDC fuel consumption of 6.6L per 100km. The fuel tank capacity is the same for all Magotan 380 models. The distance each model can travel on a full tank is as follows: Models with a 150-horsepower engine and NEDC fuel consumption of 5.8L per 100km have a fuel tank capacity of 66L, allowing a travel distance of 66/5.8*100=1138km on a full tank. Models with a 186-horsepower engine and NEDC fuel consumption of 6.3L per 100km have a fuel tank capacity of 66L, allowing a travel distance of 66/6.3*100=1048km on a full tank. Models with a 220-horsepower engine and NEDC fuel consumption of 6.6L per 100km have a fuel tank capacity of 66L, allowing a travel distance of 66/6.6*100=1000km on a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before a red light can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically require more power, necessitating more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque required. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not vaporize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine control unit may command higher idle speeds to warm up the engine, further increasing fuel consumption.

16

4

Share

What is the Replacement Cycle for Car Window Glass Seals?

Car window glass seals should be replaced based on the vehicle's condition. Generally, it is recommended to replace them every 3-4 years under normal usage. Below is relevant information about car glass seals: 1. Function: Car seals serve to fill various gaps and spaces between body components, providing functions such as shock absorption, waterproofing, dustproofing, sound insulation, and decoration, thereby enhancing driving comfort and protecting the vehicle body. 2. Maintenance: After cleaning the door and window seals with car detergent, it is advisable to apply a layer of highly permeable protective agent. This not only prevents the seals from aging but also significantly improves their sealing performance.

12

1

Share

What are some naturally aspirated cars?

Naturally aspirated cars include the Fit, Hybrid Accord, Hybrid Corolla, Hybrid Levin, Toyota Prado, Toyota Land Cruiser, Lexus LX570, Ferrari F12, Ferrari 812, etc. Naturally aspirated engines provide smoother power output as they rely on the suction created by the downward movement of the pistons to draw air into the cylinders. Turbocharged engines, on the other hand, are equipped with a turbocharger that compresses air and forces it into the engine cylinders, resulting in stronger power output. Since turbocharged engines allow more air into the cylinders, the fuel injection system also injects more fuel, enabling the engine to deliver enhanced performance.

6

2

Share

Where is the cigarette lighter fuse located in the Peugeot 301?

Which factory produces Hanteng cars?

What is the tire size for the BMW 5 Series?

Why Do Luxury Cars Require 95 Octane Gasoline?

What is the real fuel consumption of the Magotan 380?

What is the Replacement Cycle for Car Window Glass Seals?

What are some naturally aspirated cars?

How to match the window lift of Jiangling Landwind X8?

What is the model positioning of Dongfeng Fengshen AX5?

How to Remove the Maintenance Indicator on Tiggo 3?

How to Check the Transmission Fluid in a Lincoln MKC?