Where is the cigarette lighter fuse located in the Corolla?

1 Answers
OLincoln
07/29/25 5:58pm
Corolla's cigarette lighter fuse is located inside the storage compartment on the left side of the steering wheel. To replace the cigarette lighter fuse, you need to remove the storage compartment. Cars are equipped with fuse boxes, and most vehicles have two fuse boxes—one in the engine compartment and another in the cabin. The Corolla is a compact sedan under Toyota, featuring a simple yet stylish exterior design. The interior includes a thinner instrument panel, a more streamlined center console design, and optional ambient lighting, adding a more premium feel to the new model. The Corolla adopts a completely new layout, which not only provides a lower and farther driving position compared to the older model but also features slimmer A-pillars and repositioned exterior rearview mirrors for improved visibility.
Was this review help?
17
0
Share
More Forum Discussions

What causes the Landwind X7 EPB light to illuminate?

The illumination of the Landwind X7 EPB light indicates an issue with the electronic parking brake. Below is a detailed introduction to the Landwind X7: 1. Vehicle Positioning: The Landwind X7 is positioned as a compact SUV, with body dimensions of 4421mm in length, 1911mm in width, and 1631mm in height, and a wheelbase of 2660mm. 2. Powertrain: It is equipped with a 1.5T 163-horsepower engine, delivering a maximum power of 120kW and a maximum torque of 250Nm. The GTDI direct-injection engine is paired with a Honeywell small-diameter dual-cooling exhaust turbocharger. 3. Features: The vehicle comes with engine start-stop, snow driving mode, sport mode, front radar, electronic parking brake, automatic air conditioning, Bluetooth phone, and navigation system.
17
5
Share

Reasons for Sudden Decrease in Car Audio Volume

Speaker wire breakage or speaker cone damage, speaker output short circuit leading to reduced car audio volume, output protection activation causing volume decrease, power amplifier module damage, issues with the vibrating diaphragm inside the speaker. Related information: 1. Function of audio system: Installed playback device to alleviate boredom for drivers and passengers during travel. 2. Meaning of audio: The reason an audio system can be called such is that it fundamentally possesses sound reproduction capability. 3. Components of audio: Car audio mainly consists of three parts - head unit, speakers, and power amplifier.
14
0
Share

Where to Find the Land Rover PIN Code?

Land Rover PIN code can be queried at a 4S dealership. Taking the Land Rover Velar as an example, here is a detailed introduction to the Land Rover Velar: 1. Vehicle Positioning: The Land Rover Velar is an SUV model launched by Land Rover. 2. Interior Features: Equipped with a 12.3-inch full LCD instrument panel and dual 10-inch central control screens, enhancing the entertainment system. 3. Powertrain: Three powertrain options are available, including 2.0T high and low power engines and a 3.0T V6 supercharged engine. The high-power 2.0T engine delivers a maximum output of 221kW and a peak torque of 365Nm, while the 3.0T engine offers a maximum output of 280kW and a peak torque of 450Nm.
12
2
Share

Is the Audi A5 front-wheel drive or rear-wheel drive?

Audi Q5 is equipped with a front-mounted four-wheel drive system. The new Audi Q5 models are all four-wheel drive, featuring an on-demand four-wheel drive system. There are three common types of four-wheel drive systems in vehicles: full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive. Information about four-wheel drive is as follows: 1. Introduction: Four-wheel drive refers to a system where the vehicle maintains four-wheel drive throughout the driving process, with the engine's output torque distributed to the front and rear wheels at a fixed ratio. Four-wheel drive provides excellent off-road and handling performance at all times, but it cannot adjust torque distribution based on road conditions and has higher fuel consumption. 3. Four-wheel drive systems can be divided into three categories: Full-time four-wheel drive means all four wheels are always in drive mode. Part-time four-wheel drive allows the driver to manually switch between four-wheel drive and two-wheel drive. On-demand four-wheel drive means the system automatically switches between four-wheel drive and two-wheel drive, controlled by the vehicle's onboard computer.
12
0
Share

What damage does forgetting to turn off the air conditioning when getting out of the car cause?

Forgetting to turn off the air conditioning when getting out of the car can easily damage the starter and battery, and it will place a heavy load on the starter and engine during the next vehicle startup, potentially harming these components. Here are some tips for using car air conditioning: 1. Ventilate before turning it on: After the car has been exposed to prolonged sunlight, open all four doors and the sunroof to allow air to circulate inside for 3 minutes. This quickly lowers the interior temperature, making the air conditioning more effective when turned on. 2. Use the recirculation mode wisely: Recirculation blocks outside hot air, creating a sealed space inside the car, allowing the air to circulate rapidly under the air conditioning's effect for quick cooling. Once the interior temperature drops, it is recommended to switch to fresh air mode every 30 minutes to purify the cabin air, then switch back to recirculation after 5 minutes. 3. Turn off the air conditioning in time: Shut off the air conditioning 5 minutes before parking to protect the engine and save fuel.
20
4
Share

How to Check and Eliminate the Brake Light Warning?

Please check the method to eliminate the brake light warning: you need to check whether the brake light bulb is burned out or the brake light fuse is blown. If the brake light bulb is burned out, replacing it with a new one will eliminate the warning. Brake lights are generally installed at the rear of the vehicle, with a main color of red to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the front vehicle is braking, even in low visibility conditions, thereby helping to prevent rear-end collisions. The steps to replace the brake light are: 1. Use a cross screwdriver or socket to remove the bolts; 2. Pull the lamp assembly out from the rear pillar; 3. Rotate the socket counterclockwise and remove it; 4. Remove the old bulb and insert the new one.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.