Where is the cigarette lighter fuse located in the Audi A8L?

2 Answers
MiguelLee
07/25/25 3:59am
The cigarette lighter fuse in the Audi A8L is located beneath the trim panel on the lower left side of the dashboard. The fuse, also known as a current fuse, primarily serves as overload protection. Taking the 2021 Audi A8L Comfort model as an example, its body dimensions are: length 5302 mm, width 1945 mm, height 1483 mm, with a wheelbase of 3128 mm and a minimum ground clearance of 123 mm. The 2021 Audi A8L Comfort model is equipped with a 3.0T turbocharged engine, delivering a maximum horsepower of 286 hp, a maximum power output of 210 kW, and a maximum power speed range of 4500 to 6400 rpm.
Was this review help?
15
3
Share
DianaFitz
08/10/25 5:12pm
I remember the cigarette lighter fuse for the Audi A8L is commonly located in the fuse box on the left side of the driver's seat. You need to open the small plastic cover panel there, and once removed, you'll see a row of fuses. The cigarette lighter fuse is usually labeled as F43 or a similar identifier, typically a 15A or 20A model. You can quickly locate it using the fuse diagram in the owner's manual, or alternatively, check the spare fuse box behind the right panel in the trunk. If the cigarette lighter suddenly stops working, it's likely due to a blown fuse, often caused by short circuits from overheating due to high-power devices like chargers. When replacing it yourself, always turn off the ignition first to avoid electric shock, then use specialized tweezers to gently pull out the fuse and check if it's melted. Replace it with a matching new fuse. To prolong its lifespan, remember to cover the cigarette lighter socket when not in use to prevent dust and foreign objects from causing short circuits.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How often should the transmission fluid in a Sylphy be changed?

The transmission fluid in a Sylphy is generally recommended to be changed every 3 years or after driving approximately 80,000 kilometers. Different vehicle models have different replacement cycles. Below are the recommended intervals for changing transmission fluid: Manual Transmission: Manual transmission fluid is generally recommended to be changed every 3 years or after driving approximately 100,000 kilometers. Automatic Transmission: Automatic transmission fluid is generally recommended to be changed every 2 years or after driving approximately 40,000 kilometers. Continuously Variable Transmission (CVT): CVT fluid is generally recommended to be changed every 2 years or after driving approximately 60,000 kilometers. The methods for changing transmission fluid are as follows: Unscrew the drain plug at the bottom of the transmission to drain the old fluid and then refill with new fluid. Remove the transmission oil pan directly to drain the old fluid and refill with new fluid: This method is more thorough than the previous one, as it removes impurities accumulated at the bottom of the oil pan. Using a circulation machine to change automatic transmission fluid: A smart circulation machine can dynamically change the fluid, filtering and cleaning out sludge and impurities inside the automatic transmission.
12
4
Share

Which country manufactures Volvo cars?

Volvo Asia Pacific models (localized production): Volvo S90 (including new energy models), Volvo XC60 (including new energy models), Volvo S60L (including new energy models). Volvo's factories: Volvo has a total of three vehicle factories, one engine factory, and one R&D center in China, namely the Chengdu Vehicle Factory, Heilongjiang Daqing Vehicle Factory, Zhejiang Taizhou Vehicle Factory, and Hebei Zhangjiakou Engine Factory, in addition to the Shanghai R&D Center. Introduction to domestic cars: Domestic cars refer to cars designed, developed, and manufactured by Chinese people, with independent intellectual property rights, and belonging to Chinese brands, which are independent brands.
4
5
Share

What is the reason for the constant flashing and inability to open the electric door of the Sharan?

The constant flashing and inability to open the electric door of the Sharan is due to a malfunction in the electric door, and it is advisable to seek professional assistance promptly for inspection. Introduction to the Sharan: Interior: The Sharan features a forward-shifted A-pillar, adopting a typical MPV design style, which provides a more spacious cabin. Another highlight is the high-quality surface material of the dashboard, a design that prevents reflections on the windshield from affecting the driver's visibility. Powertrain: In terms of power, the new Sharan is equipped with a 1.8TSI engine, delivering a maximum power of 160 horsepower and a maximum torque of 250 N·m, paired with a 6-speed DSG dual-clutch transmission. Previously, the Sharan was only available with a 2.0TSI engine. The introduction of the 1.8TSI model will expand consumer choices and lower the entry threshold.
6
4
Share

What is the PCV valve recalled by Wuling?

Wuling recalled PCV valve is the engine crankcase forced ventilation system, installed between the engine crankcase ventilation system and the intake system, not a separate valve. PCV is the abbreviation of Positive Crankcase Ventilation, which means the active ventilation control system of the crankcase (or oil pan) in Chinese. The PCV valve consists of a valve body, valve, valve cover, and spring, and cannot be disassembled. The main function of the PCV valve: The main function of the PCV valve is to guide the gas in the crankcase into the intake manifold through the PCV valve, and a small amount of air enters the intake manifold directly from the air filter through the PCV valve. This avoids phenomena such as icing at the throttle, incomplete combustion, and deterioration of emissions. It prevents blow-by gas from entering the atmosphere and also prevents engine oil from deteriorating. Inspection method of the PCV valve: After reinstalling the PCV valve, remove the crankcase intake pipe from the air filter, and gently cover the pipe opening with a thin piece of paper. When the pressure in the crankcase decreases, the thin paper should be noticeably sucked toward the pipe opening. In addition, after stopping the engine, remove the PCV valve and shake it by hand to check. If a 'click' sound is heard, it indicates that the PCV valve is flexible and usable.
10
4
Share

Does the Wuling Hongguang Mini have a gasoline version?

Wuling Hongguang Mini does not have a gasoline version. Here are the relevant details: Positioning: The Wuling Hongguang Mini is a pure electric microcar. The dimensions of the Wuling Hongguang Mini are 2917 mm in length, 1493 mm in width, and 1621 mm in height, with a wheelbase of 1940 mm. The Wuling Hongguang Mini is a single-motor model, with the motor positioned at the rear, making it a rear-wheel-drive vehicle. Power: The motor of the Wuling Hongguang Mini has a maximum power of 20 kW and a maximum torque of 85 Nm. The Wuling Hongguang Mini uses lithium-ion batteries across all models. Lithium-ion batteries offer higher energy density and lighter weight. The front suspension of the Wuling Hongguang Mini uses a MacPherson independent suspension, while the rear suspension uses a multi-link non-independent suspension.
9
5
Share

What brand is CTR?

CTR is RUF, an English name for (RUF), located at the RUF factory on Mindelheimer Street in the town of Pfaffenhausen in the Allgau region of Germany. Not only has it accompanied Germany through World War II, the division and reunification of Germany, but as a supercar modification factory, RUF is of extraordinary value due to its history. Here is the relevant introduction: The first modified car: The first Porsche modified by RUF was launched in 1977. The car used turbocharging technology and modified the engine block. The original air-cooled 3.3-liter horizontally opposed six-cylinder engine, after enlarging the pistons, increased the power by one level. Then, starting in 1978, the 3.0 six-cylinder was modified to a 3.2-liter displacement, increasing the power output to 217bhp, fully extracting the original power of the engine. This unique approach was recognized and supported by sports car enthusiasts worldwide at the time and also brought the company a large number of orders. The first five-speed manual transmission: In 1981, RUF introduced its first five-speed manual transmission. Paired with a six-cylinder turbo engine, it provided the 911 with better performance and driving pleasure. In the same year, Auto-RUF, this car modification factory, achieved the long-coveted honor of receiving a car manufacturing certificate from the German Federal Vehicle Office (Germa-Federal-Vehicle-Office).
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.