Where is the cigarette lighter fuse in the Livina car?

2 Answers
DelKing
07/29/25 11:00pm
The cigarette lighter fuse in the Nissan Livina is located in the fuse box on the left side of the instrument panel. Open the fuse box cover, and the fuse on the far right is the cigarette lighter fuse. Below are the steps to replace the fuse: 1. Locate the fuse box for the car's electrical appliances, which may be in the glove box or under the center console depending on the model. 2. Open the fuse box cover and find the position of the cigarette lighter fuse. 3. Use the included fuse puller to remove the blown fuse and replace it with a new or spare cigarette lighter fuse. Here are some additional tips: 1. If the cigarette lighter fuse frequently blows, you should visit a 4S shop or repair shop to check for any electrical damage. Remember not to replace it with a fuse larger than 15A to avoid burning out the wiring. 2. When replacing the fuse, you can also refer to the manual to understand the ampere rating of the cigarette lighter fuse. However, do not attempt to avoid burnout by increasing the ampere rating of the fuse. The ampere rating for each fuse position is designed based on safety considerations. Blindly increasing the ampere rating can lead to extremely serious consequences, so this must be noted carefully.
Was this review help?
4
0
Share
VonEmersyn
08/16/25 12:50am
The cigarette lighter fuse location in the Nissan Livina is actually quite easy to find. It's in a small compartment below the steering wheel on the driver's side. You'll need to crouch down and look under the dashboard, where there's a plastic cover that can be pried open with a fingernail or small screwdriver. The fuse layout diagram is usually printed on the inside of the cover - just look for the icon labeled cigarette lighter or power socket. The Livina's fuse box is conveniently located on the driver's side, so there's no need to go through the hassle of checking the engine compartment. Remember it uses a small square 15A or 20A fuse. Before operating, make sure the vehicle is turned off and disconnected from power, remove all devices from the cigarette lighter, use fuse pliers for safe replacement, and finally ensure the cover is securely closed.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Warning Light on a BMW 3 Series?

The method to reset the tire pressure warning light on a BMW 3 Series is as follows: After restoring the air pressure of all four tires to the standard level, press and hold the tire pressure reset button next to the gear lever to eliminate the warning light. The BMW 3 Series is a new generation sedan product from BMW Group, with a body weight of 1465kg and dimensions of 4734mm in length, 1811mm in width, and 1455mm in height. The BMW 3 Series is equipped with a 4-cylinder engine, delivering a maximum power of 110kw and a maximum torque of 200nm. In terms of performance, the vehicle features an EDC shock absorption control system, offering three tuning modes: Sport, Normal, and Comfort. The interior includes a programmable full LCD instrument panel, a touch-sensitive central control display, and a full-color head-up display system.
10
1
Share

What Causes Frequent Car Stalling?

Reasons for frequent car stalling: 1. Use of low-quality fuel causing engine carbon buildup leading to stalling; 2. Damaged fuel pump or obstructed fuel lines; 3. Clogged fuel injectors or abnormal fuel pressure causing stalling; 4. Driver's lack of proficiency or improper operation may also result in stalling; 5. Faulty spark plugs or ignition coils. Solutions for stalling: 1. At idle speed, the car doesn't move quickly—simply restart the engine after stalling. For automatic transmission cars, shift to Park or Neutral before restarting; 2. If stalling occurs while coasting, maintain steering control while gently applying brakes. Manual transmission vehicles should depress the clutch, engage the appropriate gear, then release the clutch to let the vehicle's momentum restart the engine. Automatic transmission cars need to shift to Neutral before restarting the engine.
16
3
Share

Where to Insert the Memory Card in a Dash Cam?

Where to insert the memory card in a dash cam depends on the type of dash cam. For mirror-type dash cams, the card slot is located at the top of the front side of the device. For hidden-type dash cams, the card slot is on the left or right side of the device. For bullet-type dash cams, the card slot is on the right side of the device. Some dash cams have a more discreet design, so the memory card slot may be covered, but it is generally not too difficult to find. A dash cam is an instrument that records images, sounds, and other relevant information during vehicle travel. After installing a dash cam, it can record the entire driving process in video and audio, providing evidence in case of traffic accidents. A dash cam typically consists of a main unit, a speed sensor, data analysis software, and an infrared camera.
18
2
Share

What are the reasons for engine shaking during cold start?

Reasons for engine shaking during cold start: 1. Low ignition energy at low engine temperature, insufficient temperature inside the engine, and inadequate temperature of both fuel and lubricating oil. More fuel injection is required during cold start to meet power requirements; 2. Inaccurate air-fuel mixture ratio adjustment, which occurs in both open-loop and closed-loop control systems; 3. Carbon deposits on engine valves and intake ports; 4. Variations in spark plug ignition gap and timing control; 5. Malfunctioning coolant temperature sensor; 6. Dirty air flow meter resulting in reduced air intake; 7. Poor working condition of the exhaust gas recirculation valve, introducing exhaust gas during idle; 8. Poor fuel quality failing to meet the required calorific value, leading to reduced combustion power output.
20
3
Share

What emission standard does VI refer to?

VI refers to the China VI emission standard. The China VI fuel standard can reduce particulate emissions by up to 10%, significantly lowering the pollutant content in vehicle exhaust. Under the China VI standard, the upper limit of aromatic hydrocarbon content in ethanol gasoline for vehicles is reduced by 12.5%, olefin content by 25%, and benzene content by 20%. After upgrading from China V to China VI, the environmental and performance characteristics of gasoline and diesel for vehicles are further improved, effectively reducing engine carbon deposits and extending engine lifespan. Currently, vehicles that meet the China VI emission standard include the X-Trail, all-new Sylphy, Tiguan L, Cadillac XT4, Highlander, Camry, new Lavida, Roewe RX5, and Acura CDX hybrid version, among others.
5
4
Share

What to Do When Fog Lights Get Water Inside?

The solutions for fog lights getting water inside are: 1. If the fog light has slight water ingress, you can turn on the lights for a while, using the heat generated when they are turned on to allow the internal moisture to escape through the vent pipe; 2. In case of severe water ingress, it is necessary to promptly remove the lamp cover, drain the water, and let it dry. It is important to check whether there are any cracks or leaks in the headlight, and if so, they need to be addressed as well. Fog lights usually refer to automotive fog lights, which are installed at the front and rear of the vehicle to illuminate the road and provide safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.