Where is the cigarette lighter fuse for Nissan Teana?

What does the car skid mark OFF mean?

OFF is the deactivation button for the Vehicle Stability Control system. This system is enabled by default and can be turned off by long-pressing this button. Below is relevant information about the Electronic Stability Program: 1. Introduction: The Electronic Stability Program (ESP) is an automotive anti-skid device that can control both drive wheels and driven wheels, incorporating ABS (Anti-lock Braking System) and ASR (Anti-Slip Regulation). The ESP system is essentially a traction control system. Compared to other traction control systems, ESP not only controls the drive wheels but also the driven wheels. For instance, in cases of oversteer commonly seen in rear-wheel-drive vehicles where the rear wheels lose control and cause the tail to slide out, ESP will apply braking to the outer front wheel to stabilize the vehicle. In situations of understeer, to correct the tracking direction, ESP will brake the inner rear wheel to adjust the driving direction. 2. Mechanism of Action: The function of ESP is to automatically intervene and correct the driver's operation when it exceeds the limit. The computer controls the vehicle's movement through two methods: first, by controlling the throttle to reduce fuel supply, thereby decreasing the car's power and slowing it down; second, by applying braking to certain wheels to reduce the vehicle's speed below the limit.

6

2

Share

What is the function of the low-pressure fuel pump?

As the most fundamental component in the engine's fuel supply system, the fuel pump is responsible for extracting fuel from the fuel tank during engine operation and continuously delivering it to the engine at a certain pressure through the fuel supply line. The fuel is then further pressurized by the high-pressure fuel pump and supplied to each cylinder in accordance with the engine's working sequence. The following are relevant details: 1. Power source: Although vehicle electrification has become an irreversible trend, the primary power source for cars currently still relies on traditional internal combustion engines. For fuel engines, general attention is usually focused on mechanical components such as pistons and cylinders, as well as electronic control units like ignition and valve timing, with little awareness of the fuel supply system, especially the fuel pump at the front end of the fuel supply system. 2. Working principle: Currently, most vehicles use vane-type electric fuel pumps. Vane-type electric fuel pumps offer advantages such as high fuel delivery capacity, high fuel pressure, stability, low noise, and long service life. This type of fuel pump primarily relies on an electric motor to drive the rotation of turbine blades, utilizing centrifugal force to draw fuel in through the intake port and expel it through the outlet port.

18

4

Share

What are the items included in the second maintenance of a car?

Basic items include changing the engine oil and oil filter, while some models may require replacing the air and cabin air filters. The second maintenance also involves inspection and servicing of dozens of items across multiple systems, including the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tires. Here are additional notes about secondary maintenance: 1. Secondary maintenance is a relatively comprehensive inspection that helps expose and resolve existing faults, ensuring that all components and overall vehicle performance are in normal condition. It plays a crucial role in car maintenance. 2. Secondary maintenance primarily focuses on inspection and adjustment-centered servicing for vehicles that have traveled a certain mileage.

19

1

Share

How is the annual inspection conducted for 7-seater MPVs?

Seven-seater MPVs have the following annual inspection regulations: 1. For commercial passenger vehicles, an inspection must be conducted once a year within the first five years, and every six months thereafter. 2. For non-commercial medium-sized passenger vehicles, an inspection is required once a year within the first ten years, and every six months after that. Other descriptions regarding the annual inspection of seven-seater MPVs: Seven-seater MPVs are classified as medium-sized passenger vehicles and can be either commercial or non-commercial. Conducting inspections according to regulations is for the safety of the vehicle. Therefore, when the specified time arrives, it is essential to follow the rules and have the vehicle inspected to enhance driving safety and avoid potential hazards.

14

1

Share

What Causes Windshield Noise?

Damaged wiper blades. Below is a detailed explanation of the reasons for windshield noise: 1. The rubber strip of the wiper blade has aged, becoming hard and deformed, preventing it from fully adhering to the car glass, resulting in noise. 2. The wiper blade has cracks, fissures, aging, rust, or deformation issues. 3. Noise caused by a dirty windshield. If the vehicle is parked outdoors for an extended period without timely washing, a layer of oil film can easily form on the windshield. The replacement cycle for wiper blades is generally about 1 year. The formation of oil films includes insect oil, tree sap, and exhaust emissions, which accumulate on the front windshield over time to form a transparent substance.

8

3

Share

What Causes the Mazda6 to Experience Idle Fluctuations and Shaking?

Possible causes of engine idle shaking in the Mazda6 are as follows: 1. Intake manifold or various valve leaks: When air, gasoline vapor, or combustion exhaust that should not enter the intake manifold gets in, it causes the air-fuel mixture to become too rich or too lean, leading to abnormal engine combustion. If the leak affects only individual cylinders, the engine may experience more severe shaking, particularly impacting cold idle conditions. Common causes include: loose intake manifold clamps or cracked rubber hoses; leaking intake manifold gaskets; damaged intake manifolds or other components wearing holes in the manifold; leaking O-ring seals on fuel injectors; disconnected or cracked vacuum hose connectors; excessive opening of the Positive Crankcase Ventilation (PCV) valve; a constantly open charcoal canister valve; or an Exhaust Gas Recirculation (EGR) valve that does not close properly. 2. Fuel injector issues: Uneven fuel injection or poor atomization can lead to power imbalance among cylinders. Common causes include: clogged injectors, poor sealing, or fuel spraying in a stream rather than a mist. 3. Spark plugs and high-tension wires: Faulty spark plugs or high-tension wires can result in reduced spark energy or misfires. Common causes include: incorrect spark plug gap; eroded or damaged spark plug electrodes; carbon buildup on spark plug electrodes; cracked spark plug insulators; excessive resistance in high-tension wires; leaking insulation or connectors on high-tension wires; or eroded or poorly insulated distributor rotor electrodes.

5

2

Share

Where is the cigarette lighter fuse for Nissan Teana?

What does the car skid mark OFF mean?

What is the function of the low-pressure fuel pump?

What are the items included in the second maintenance of a car?

How is the annual inspection conducted for 7-seater MPVs?

What Causes Windshield Noise?

What Causes the Mazda6 to Experience Idle Fluctuations and Shaking?

What to Do If Water Gets into the Car Fuel Tank?

How much fuel can a 50-liter fuel tank actually hold?

How to Adjust the Carburetor Mixture to be Richer or Leaner?

What is the function of the antenna on the roof of a car?