···
Log in / Register

Where is the cigarette lighter fuse for Haval H6?

3 Answers
TimothyFitz
09/02/25 4:45am
The cigarette lighter fuse for Haval H6 is located in the cabin fuse box. The usage method of the cigarette lighter is: 1. Turn on the car power and insert the cigarette lighter into the car power socket; 2. Press down to lock; 3. The cigarette lighter starts heating. When the temperature of the cigarette lighter heating wire reaches, it will automatically pop out or wait for 5 to 8 seconds until the heating wire turns red, then manually pull it out. Taking the 2021 Haval H6 as an example, its body dimensions are: length 4615mm, width 1860mm, height 1720mm, and the wheelbase is 2680mm. The 2021 Haval H6 is equipped with a 1.5t turbocharged engine, with a maximum horsepower of 150ps, a maximum torque of 210nm, a maximum power of 110kw, and is matched with a 6-speed manual transmission.
Was this review help?
6
2
Share
SanAlana
09/14/25 6:54am
No power in the cigarette lighter of your Haval H6? It's likely a blown fuse. In my older H6 model, the fuse box is located below the steering wheel on the left side—you'll need to crouch down and pry open the small cover. Newer models seem to have moved it behind the storage compartment near the driver's left knee. Lift the plastic cover, and you'll find a fuse location diagram printed on the back. The 15A yellow fuse corresponding to the cigarette lighter icon is the one you need—some cars use a spare plug symbol to indicate it. Replacing it is simple: use plastic tweezers or needle-nose pliers to pull out the blown fuse vertically and replace it with one of the same amperage. If you don't have enough spares in the engine compartment fuse box, you can temporarily borrow the 15A yellow fuse from the wipers or radio, but remember to buy replacements later. While you're at it, clean any dirt from the cigarette lighter socket and straighten any bent metal contacts.
Was this review help?
9
3
Share
Expand All
BradyMarie
10/28/25 7:37am
Don't panic sis! My H6 just blew the cigarette lighter fuse last week. You know that storage compartment on the driver's left side? For newer models, you'll need to pull out the entire compartment, while older versions just require prying open a small panel under the steering wheel. Remember to use your phone's flashlight to locate it - look for the F27 or F32 label in the manual and find the 15A yellow mini fuse marked 'CIG' or with a pipe symbol. No special tool? Nail clippers work too! Pull it out and check if the metal wire inside is broken - that means it's blown. You can get replacement mini fuses for 3-5 yuan at hardware stores. Oh! Never plug both a dashcam and car vacuum into the lighter socket simultaneously - overloading is the fastest way to blow fuses! While you're at it, clean out any coin debris from the lighter socket for better durability.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

Can Strobe Brake Lights Pass the Annual Vehicle Inspection?

Strobe brake lights cannot pass the annual vehicle inspection. Modifying car tail lights to strobe is illegal: Strobe lights are restricted lights, only authorized for police vehicles or special-purpose vehicles, and are not permitted for civilian use. According to Article 16, Paragraph 1 of the 'Road Traffic Safety Law of the People's Republic of China': No unit or individual may assemble a motor vehicle or alter its registered structure, construction, or characteristics without authorization. Regulations on vehicle modifications: To modify a motor vehicle, changes must be made within the scope permitted by traffic authorities. This includes modifications to body color, engine, fuel type, or chassis number. After submitting an application, the driver must obtain approval from the traffic authorities before proceeding with any modifications. No unit or individual may assemble a motor vehicle or alter its registered structure, construction, or characteristics without authorization.
14
0
Share

What are the requirements for tires in vehicle annual inspection?

Vehicle annual inspection has the following requirements for tires: no excessive wear, tire tread patterns must be consistent, four-wheel tread patterns should match or at least the front two and rear two should match, but left and right inconsistency is not allowed. Annual inspection refers to the annual or biennial safety inspection of vehicles, which includes comprehensive checks on components such as horns, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation. Several factors that may affect the annual inspection include: 1. Modification of vehicle appearance or external dimensions; 2. Non-standard license plates; 3. Improper use of lighting; 4. Unauthorized painting or modification of the vehicle body; 5. Unauthorized alteration of vehicle logos.
12
1
Share

Will the driver's license be checked during a drunk driving inspection?

During a drunk driving inspection, the driver's license will definitely be checked. Traffic police first verify two documents during a drunk driving inspection, namely the vehicle registration certificate and the driver's license. Dangers of drunk driving: Alcohol stimulation during drinking can make people excited, leading to excessive consumption without realizing it. When the alcohol concentration in a person's blood reaches a certain level, their ability to react to and control external situations decreases, along with their capacity to handle emergencies. For drunk drivers, the higher the blood alcohol content, the greater the likelihood of a collision. Penalties for drunk driving: Driving under the influence of alcohol results in a six-month suspension of the motor vehicle driver's license and a fine. If penalized for drunk driving once and caught again, the offender will face up to ten days of detention, additional fines, and revocation of the motor vehicle driver's license.
8
2
Share

What is the fuel consumption of the Benelli TNT 600?

Benelli TNT 600 fuel consumption: Official 5.5L/100KM, actual fuel consumption ranges between 3.7-4.6. Fuel consumption calculation formula: Fuel consumption per 100 kilometers = Fuel consumption (liters) ÷ Distance traveled (kilometers) × 100. For example, if a 1.6L car travels 400 kilometers and consumes 30 liters of fuel, the fuel consumption per 100 kilometers = 30 ÷ 400 × 100 = 7.5 liters. Tips to reduce fuel consumption: Ensure correct tire pressure. Pressure should not be too high or too low, as both can increase fuel consumption. Regularly check tire pressure to avoid affecting driving fuel consumption. Avoid changing tire size unnecessarily. Wider tires increase resistance. Unless special requirements for good grip are needed, excessively wide tires will only increase fuel consumption.
12
2
Share

At what engine speed does it start?

Engine speed is normally between 500 and 850 revolutions per minute. The steps to start a car engine are: 1. Turn the ignition key to the ON position and wait for 5 to 8 seconds when starting; 2. Turn the key to the start position; 3. Immediately release the ignition key after the engine starts successfully, and it will automatically return to the ON position. Precautions for starting a car engine are: 1. Do not start the engine immediately after inserting the key when getting in the car; 2. Do not press the brake first when starting a vehicle with one-button start; 3. When the key fob of a one-button start vehicle is out of battery, bring the key close to the start button; 4. Do not use excessive force when the inserted key cannot be turned; instead, turn the key while simultaneously turning the steering wheel back.
14
1
Share

What is the basic function of a clutch?

The functions of a clutch include: 1. Facilitating gear shifting and preventing overload in the transmission system; 2. Ensuring the transfer or interruption of engine power output between the engine crankshaft and the transmission device according to the driving needs of the vehicle; 3. Assisting the vehicle in starting smoothly. The clutch is located inside the flywheel housing between the engine and the gearbox, and the clutch assembly is fixed to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the gearbox, thereby cutting off or transmitting the power input from the engine to the gearbox.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.