Where is the cigarette lighter fuse box located in the Buick Excelle?

1 Answers
SanBrayden
07/29/25 10:48am
The cigarette lighter fuse box in the Buick Excelle is located beneath the interior trim panel on the side of the driver's center console. Simply pry open the trim panel to access it. The fuse box cover typically includes a diagram that labels each fuse number and its corresponding function. The Buick Excelle is a model under SAIC General Motors, with body dimensions of 4419mm in length, 1814mm in width, and 1487mm in height, and a wheelbase of 2685mm. In terms of exterior design, the Buick Excelle features the brand's signature winged chrome grille, giving the front fascia a sharper and more robust appearance. The combination of black piano vertical grille and high-gloss chrome winged grille naturally draws the visual focus of the front end to the emblem.
Was this review help?
12
4
Share
More Forum Discussions

Why is the key light flashing red on the dashboard?

The reasons for the key light flashing red on the dashboard are: 1. Anti-theft system malfunction; 2. Insufficient battery in the car key. There are two situations when the key light flashes red on the dashboard: one is without the KEY symbol, which is the engine anti-theft indicator light. If it does not turn off after the car starts, you should go to a 4S shop or a car repair shop for inspection; the other is with the KEY symbol, indicating insufficient battery in the key. You should check it in time to determine whether the battery needs to be replaced. The function of the car anti-theft system is to prevent the car itself from being stolen and the loss of valuable items in the car. The system is mainly composed of electronic control circuits, alarm devices, remote control keys, mechanical keys, and actuators.
16
0
Share

What is the fuel tank capacity of the Baojun 510?

The fuel tank capacity of the Baojun 510 is 45L. The structural design of the fuel tank provides waterproofing and insulation functions, but factors such as sediment accumulation, rust, and deformation inside the tank can affect its capacity. It is advisable not to wait until the fuel warning light comes on before refueling. When the light comes on, it indicates that the fuel level is already below the fuel pump. Consistently waiting until the light comes on to refuel can shorten the lifespan of the fuel pump. The Baojun 510 is a compact SUV launched by SAIC-GM-Wuling. It is equipped with a 1.5L naturally aspirated engine across all variants, delivering a maximum output power of 82 kW and a peak torque of 135 Nm. The transmission system offers three options: a 6-speed manual transmission, a 5-speed AMT transmission, and an 8-speed CVT continuously variable transmission.
18
0
Share

What are the functions of window tinting?

Window tinting functions: 1. Tinting can effectively reduce the large amount of heat generated by infrared rays; 2. Medium and long waves in ultraviolet rays can penetrate thick glass, and applying heat-insulating film can block 99% of ultraviolet rays, protecting the skin from damage and slowing down the aging of car interiors; 3. The base layer of the film is polyester film, which has excellent tear resistance and penetration prevention, preventing secondary injuries to passengers in case of accidental glass breakage; 4. After tinting, the interior of the car is not visible from the outside, ensuring privacy and safety; 5. It maintains eye comfort and reduces accidents caused by glare; 6. The loss of air conditioning cooling capacity can be compensated by applying heat-insulating film, preventing excessive interior temperature to a certain extent, thereby reducing air conditioning energy consumption; 7. According to personal preferences, car customization can be achieved through tinting.
2
3
Share

Is it necessary to warm up the car in winter?

It is necessary to warm up the car in winter. If you live in the north where winters are extremely cold, such as in Northeast China with temperatures dropping to -20 or -30 degrees Celsius at night, it is advisable to warm up the car for about two to three minutes in the morning. Then, drive at idle speed for 2 minutes before gently pressing the accelerator to avoid engine wear. If you live in the south, you can warm up the car for half a minute to a minute in the morning during winter, then drive slowly, keeping the engine speed below 2000 RPM initially. Once the water temperature rises a bit, you can drive normally. If the car is over ten years old, the warm-up time should be further extended as the car's performance is likely to have declined.
19
0
Share

How to adjust the seat in Passat?

Passat seat adjustment method: If it is electric adjustment, press the small module on the left side of the seat that resembles the seat shape, and push it up and down or back and forth to find a comfortable position; If it is manual adjustment, there is a pull handle on the lower right side of the seat. Lift it and push the seat back and forth; The height of the seat cushion can be adjusted by a lever on the left side of the seat that can be pulled up or pushed down. The length, width, and height of the Passat body are 4933mm, 1836mm, and 1469mm respectively, with a wheelbase of 2871mm. The car is front-wheel drive, and the engine it is equipped with has a maximum power of 110kw and a maximum torque of 250nm.
18
4
Share

How to Replace Engine Coolant in a Car?

Methods for replacing engine coolant in a car: 1. Before replacing the coolant, turn off the engine and wait for about 30 minutes to allow the coolant to cool down; 2. Use a jack to lift the vehicle; 3. Use a wrench to loosen the screw at the bottom of the radiator and use a waste liquid basin to catch the old coolant; 4. Use a wrench to remove the radiator cap, being careful not to get burned; 5. Add softened water and let the engine idle for 5 minutes to thoroughly clean the internal cooling circulation system; 6. Add new coolant up to the maximum water level; 7. Let the engine idle for 5 minutes, then observe the coolant reservoir's scale line and top it up if necessary. Coolant circulates within the engine cooling system, carrying away excess heat generated during engine operation, allowing the engine to operate at normal working temperature. When the coolant is insufficient, it will cause the engine water temperature to rise too high, leading to damage to engine components.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.