Where is the child safety lock on the Volkswagen Lavida?

1 Answers
DiKaleb
07/30/25 8:45am
Lavida's child safety lock is located on the side of the rear door and is an orange-red button. The following is a related introduction to the child safety lock: 1. The rotary child safety lock requires the use of a key (or key-shaped object) inserted into the corresponding hole to rotate the knob switch for locking and unlocking operations. Below is how to operate the rotary child safety lock: (1) Activation: Insert the mechanical key into the hole and rotate it in the direction indicated by the connector (usually clockwise) until it is tightened. (2) Deactivation: Rotate the keyhole in the opposite direction to unlock the child lock. 2. The toggle-type child safety lock is more convenient to use. Below is how to operate the toggle-type child lock: (1) Activation: Push the toggle lever (in the direction of the arrow) to complete the locking operation of the child safety lock. (2) Deactivation: Push the toggle lever all the way in the opposite direction of the arrow to deactivate the child safety lock.
Was this review help?
2
3
Share
More Forum Discussions

How to adjust the headlights of Wuling Hongguang S3?

Wuling Hongguang S3 headlight adjustment method is as follows: Open the engine hood and find the two adjustment screws near the headlights, one for adjusting height and the other for adjusting left-right. For adjusting the distance and height of the headlight beams, there are corresponding adjustment screw knobs at the rear of the headlights. Both the height and left-right adjustments can be made separately by rotating the knobs clockwise or counterclockwise to adjust the distance and height of the beams accordingly. Extension: 1. The Wuling Hongguang is a crossover self-developed product between commercial vehicles and passenger vehicles launched by SAIC-GM-Wuling. With its smooth exterior design, diverse and practical spacious driving space, perfect balance between power and economy, and strong performance in handling and safety, it has subverted the traditional impression of commercial vehicles. 2. As an entry-level model, the new car's configuration is more inclined towards economic orientation. Its rear suspension has been changed to a leaf spring suspension, tire specifications to 175/70R14C, equipped with halogen headlights, front fog lights have been removed, door handles, tailgate handles, and front grille have been changed to black paint, aluminum alloy wheels have been replaced with steel wheels, roof rack has been removed, remote key has been changed to optional, dual evaporator air conditioning has been removed, single evaporator air conditioning can be optionally installed, middle door glass has been changed to manual switch, and the 12V power outlet in the car has also been removed.
13
2
Share

What Causes the Fuel Gauge to Stop Moving?

The fuel gauge needle not moving is usually caused by a damaged fuel level sensor (commonly known as the fuel float). It is recommended to go to a repair shop and connect the two wires of the fuel float. If the fuel gauge needle goes to the top, it indicates the fuel float is damaged. If it still doesn’t move, check the wiring and the dashboard. If the needle doesn’t move immediately after filling up the tank, it means the fuel float is completely pushed to the top of the tank by the buoyancy of the fuel, and the needle connected to the sensor cannot rotate. Only after consuming some fuel and the float descending will the needle move with the sensor. Steps to Diagnose a Non-Moving Fuel Gauge: First, check whether the battery has power. If the gear display and headlights are working normally, there is no issue with the battery. If there is power, check the fuel level sensor (fuel float). Use a wire to short-circuit the two wires of the float. If the fuel gauge responds, the issue is with the float. The fuel float has a small chip sensor at the top, which may get dirty due to poor fuel quality, affecting the contact points. Clean it with an eraser. After removing the dashboard, use a multimeter and a needle to locate and check the wiring corresponding to the fuel gauge.
10
4
Share

Should You Repair or Replace a Blown Tire?

Generally, a blown car tire cannot be repaired. Only tires that have been punctured and are leaking air can be patched and reused. A blown tire causes significant damage, and if the damage is severe, even after repair, there may still be safety hazards. Therefore, it is not recommended to continue using such a tire; instead, it should be replaced with a new one. More details are as follows: 1. After a car tire blows out, it cannot be repaired and reused because the blowout has already damaged the tire's structure. For tires that have blown out, it is advisable to directly replace them with new ones. 2. For tires that have been repaired multiple times, it is recommended to move them to the rear wheels for use. This is because such tires, if placed on the front wheels, can still affect driving performance, especially at high speeds. Placing them on the rear wheels is safer.
6
5
Share

Where is the cabin air filter located in the 2011 Great Wall H5?

2011 Haval H5 does not have a cabin air filter. Here is the relevant information: 1. The 2011 Haval H5 does not come with a cabin air filter. Models produced in the second half of 2012 and later began to be equipped with air conditioning systems that include filters. The location is outside the front windshield on the passenger side, behind the engine compartment, under a plastic cover. You can access it by loosening a screw and lifting the cover. 2. A car's air conditioning system is relatively complex, and the cabin air filter can be considered the most important component of the system. Its primary function is to thoroughly filter out dust, pollen, bacteria, and other contaminants from the air, which could otherwise pollute the interior of the air conditioning system. 3. During the maintenance of the air conditioning cooling system, it is essential to thoroughly clean the cabin air filter. You can use an air hose to remove dust. If the cabin air filter cannot be effectively cleaned, it should be replaced.
8
5
Share

Is a Temporary Residence Permit Required When Buying a Used Car?

Most cities require a temporary residence permit when purchasing a used car. Below are some relevant details about buying a car: 1. Important Notes: The car purchase invoice is the most important document when buying a car and is also one of the required documents for vehicle registration. Therefore, be sure to obtain the purchase invoice from the dealer and confirm its validity. 2. Vehicle Inspection: For vehicles eligible for the six-year exemption from inspection, the vehicle does not need to be physically present. Simply bring the vehicle registration certificate, the ID card of the person named on the registration, and a copy of the valid compulsory insurance policy. Check for any traffic violations on the traffic management website and then proceed to the nearest inspection station to complete the process.
17
1
Share

What kind of engine oil should be used for Volkswagen Santana?

Volkswagen Santana uses original engine oil with the specification of 5W-30. If you want to change the engine oil during later maintenance, you can choose international brands such as Shell, Mobil, or Castrol. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Volkswagen Santana is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows; start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; use a special wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; add the new oil through the oil filler cap on the engine valve cover, usually filling about three-quarters of a standard oil container; start the engine and let it run for 5 minutes, then check for oil leaks around the drain plug and oil filter, and repair if necessary; after stopping the engine, pull out the oil dipstick to ensure the engine oil level is within the standard range.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.