Where is the child lock on the Golf?

2 Answers
BriannaLynn
08/30/25 4:33am
The child lock on the Volkswagen Golf is located on the side of the rear door, featuring a black circular keyhole. Simply insert the key and turn it 90 degrees to activate the child lock. If children frequently sit in the rear seats, it is recommended to keep the child safety lock engaged. Below is an introduction to child locks: A child lock, also known as a car child safety lock, is a safety device designed to protect children sitting alone in the rear seats. It prevents the danger of children accidentally opening the door from inside while the vehicle is in motion. During driving, the driver should regularly check whether the child lock is engaged.
Was this review help?
3
5
Share
SanKylie
09/11/25 8:32am
I've been driving a Volkswagen Golf for five or six years, and the child lock position is crucial, especially when children are seated in the back. It's usually located on the door edge, specifically on the inner edge of the rear door near the door handle. When you open the door, you'll see a small switch or slider—activating it prevents children from opening the door from inside. The design is quite intuitive; modern Golfs like the eighth generation follow this, but older models like the MK6 might have slight differences. Always check your vehicle manual or look up video demonstrations online to confirm safe operation. When adjusting, avoid forcing it to prevent damage. As an owner, I recommend cleaning that area during car washes to prevent dust buildup. If the child lock isn't engaged, it can be very dangerous if kids play with the door handle while driving, especially at high speeds or during turns when distractions are risky. If a door won't open, don't panic—just check the switch setting from the outside first. Overall, it's a simple but lifesaving feature—make it a habit to enable it whenever needed!
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Why is the supplementary page of the driver's license not laminated?

The supplementary page of a C1 driver's license cannot be laminated. The driver's license consists of a main page and a supplementary page; these two parts serve different functions. The main page records the driver's information and the types of vehicles they are licensed to drive. If this information does not change, the main page remains sealed. However, if changes occur, the license must be reissued. Below is relevant information about the supplementary page of the driver's license: 1. Function of the supplementary page: The supplementary page allows the police to record the license's file number and related matters. The file number is typically a 12-digit code. The first two digits represent the province code where the license was issued, the third and fourth digits indicate the district or county code, and the remaining eight digits are sequentially assigned by the local vehicle management office. Each driver's license has a unique file number, which helps identify the issuing authority and track the driver's penalty points. 2. Replacing the supplementary page: The replacement process is straightforward. The driver needs to bring their ID card, driver's license, two one-inch color photos with a white background, and the replacement fee to the local vehicle management office to complete the procedure.
9
3
Share

How Much Gasoline Should Be Added for 100ml Fuel Additive?

100ML of fuel additive requires 50-100L of gasoline. Below is a detailed introduction to fuel additives: Functions of Fuel Additives: The role of fuel additives is to address carbon deposit issues in the fuel system of fuel-injected vehicles, quickly restore the optimal working condition of the engine, and compensate for certain deficiencies in gasoline properties. They also impart new beneficial characteristics to gasoline, such as improving atomization, reducing wear, protecting the engine, and lowering emissions. Precautions When Adding Fuel Additives: Currently, the common fuel tank capacity for small family cars on the market is 35-45L, mid-size cars around 55-75L, and large or luxury cars around 75-100L. The standard specification for fuel additives is 60ML, which typically can be mixed with 30-60L of gasoline. Therefore, a common family car usually requires 1-2 bottles of fuel additive per tank of gas, with the exact amount to be added depending on the specific circumstances of the vehicle.
5
2
Share

How Many Times Can 2 Liters of Windshield Washer Fluid Be Used?

A two-liter bottle of windshield washer fluid does not have an exact number of uses. Normally, it can last for one to two months, depending on the frequency of use. Below is an extended introduction about windshield washer fluid: The Function of Windshield Washer Fluid: Automotive windshield washer fluid is formulated with various surface-active agents and additives. These surface-active agents have functions such as wetting, penetrating, and solubilizing, which help in cleaning. Additionally, it can lower the freezing point of the liquid, dissolving snow and frost on the car's windshield. Moreover, after cleaning, it forms a protective layer on the glass surface, preventing the formation of mist droplets and ensuring the windshield remains clear and bright, providing a clear view. Choosing Windshield Washer Fluid: Different seasons and climates require different types of windshield washer fluid. The selection mainly depends on temperature. For example, in winter, the fluid needs to be antifreeze, as regular washer fluid can easily freeze in cold weather. In summer, especially in southern regions where there are more insects, it is advisable to use washer fluid that contains insect-repellent properties.
3
2
Share

What Causes Frosting on the Low-Pressure Pipe of a Car's Air Conditioning System?

Frosting on the low-pressure pipe of a car's air conditioning system is caused by a malfunctioning expansion valve or a faulty evaporator temperature sensor. More details are as follows: 1. Malfunctioning expansion valve: Frosting on the low-pressure pipe is often due to a faulty expansion valve, which fails to detect the real-time temperature of the low-pressure pipe. When the temperature drops too low, the pipe will inevitably frost (the expansion valve's opening cannot be reduced). This issue typically cannot be repaired and requires replacing the expansion valve. 2. Faulty evaporator temperature sensor: The problem may also stem from a defective evaporator temperature sensor. This component is designed to monitor the surface temperature of the evaporator and relay the data to the automatic air conditioning control unit. When the temperature falls below 2°C, the air conditioning system shuts down to prevent frosting or icing. If the evaporator temperature sensor fails, it cannot detect the correct temperature data, leading to frosting on the low-pressure pipe. In this case, replacing the sensor is necessary.
9
0
Share

What Causes Loud Interior Noise When the Car is Running?

There are several reasons for loud interior noise when a car is running, including engine noise, tire noise, wind noise, and chassis noise. Below are explanations for the causes of loud noise while driving: Engine Noise: Check if the engine oil pump, cooling system, or exhaust pipe is cracked, then adjust the valves and inspect the engine oil pressure. If everything appears normal but the noise persists, consider adding a soundproofing pad under the hood. Tire Noise: Adjust the tire pressure to a moderate level, as excessively high tire pressure can increase noise. Additionally, attaching a piece of felt to the mudguards can help reduce tire noise. Wind Noise: The faster the driving speed, the louder the wind noise becomes. Adding sealing strips to the door frames or incorporating soundproofing material inside the doors can effectively reduce the noise entering the car. Chassis Noise: The chassis may create friction with the air. Applying soundproofing pads and vibration damping sheets to the bottom of the trunk can help mitigate this noise.
10
2
Share

How to Handle Over 100 Traffic Violation Points?

For a vehicle with over 100 traffic violation points, the driver must attend the subject one study and examination at the traffic management department of the public security authority. Upon passing the exam, the driver must then take the road driving skills test. If the road driving skills test is passed, the accumulated points will be cleared. The specific details are as follows: 1. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Article 68, if a motor vehicle driver accumulates 12 points in a single scoring cycle, the traffic management department of the public security authority shall detain their motor vehicle driving license. 2. Taking the exam: The motor vehicle driver must, within 15 days, attend a seven-day study session on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security authority where the driving license was issued or where the violation occurred. After completing the study, the vehicle management office must conduct a road traffic safety laws, regulations, and related knowledge examination within 20 days.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.