Where is the child lock on the Accord car?

2 Answers
JasmineFitz
07/24/25 5:58am
The child lock on the Accord car is located below the armrest of the vehicle door. Here are the specific details about the child lock on the Accord car: 1. How to activate: Move the switch to the lock position to enable the child lock. Once enabled, rear passengers will not be able to open the door from inside when the door is closed; the door can only be opened by pulling the door handle from the outside. The child lock is designed to prevent children from accidentally opening the door while the car is in motion, which could lead to accidents such as falling out of the vehicle. It is best to have an adult accompany children when they are in the car. 2. How to deactivate: Move the switch to the unlock position.
Was this review help?
14
3
Share
KingLynn
08/11/25 1:43am
When driving the Accord, I often deal with the child lock feature, which is super practical, especially with kids in the back seat. On the edge of the rear door, near the door frame, there's a small hole or a toggle switch that requires the original car key to insert and turn for activation or deactivation. To operate it, you need to open the rear door and look for it, usually near the lock mechanism. Once set, the door can only be opened from the outside, rendering the inner handle ineffective. The Accord's design is quite similar to its sibling model, the Civic, with a clearly marked position and straightforward manual operation. It's a good habit to check it regularly, like confirming its status during seasonal changes, to prevent accidental activation by children. Safety shouldn't be taken lightly—the manual includes detailed diagrams, and it's recommended for new owners to familiarize themselves with this feature first. Other cars, like Toyota, have a similar layout, but the Accord is more user-friendly with lower error rates, significantly enhancing driving safety, especially during long trips.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

How Much Horsepower Does the Bentley Bentayga Have?

The Bentley Bentayga equipped with a 4.0-liter V8 twin-turbocharged engine delivers 549 horsepower, while the model with a 6.0-liter twin-turbocharged W12 engine produces 608 horsepower. The Bentley Bentayga is a mid-to-large-sized SUV under the Bentley brand, featuring two engine options: a 4.0-liter twin-turbocharged V8 engine and a 6.0-liter twin-turbocharged W12 engine. The 4.0-liter V8 twin-turbocharged engine has a maximum power output of 404 kW and a peak torque of 770 Nm, while the 6.0-liter W12 twin-turbocharged engine boasts a maximum power of 447 kW and a peak torque of 900 Nm. Both engines utilize aluminum alloy cylinder heads and blocks and are paired with an 8-speed automatic transmission. The Bentley Bentayga comes with a full-time four-wheel-drive system and is equipped with a Torsen central differential.
7
0
Share

What is the actual measured minimum ground clearance of the Vision SUV?

The actual measured minimum ground clearance of the Vision SUV is 175mm. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. The Vision SUV is Geely's first mid-level business and family sedan, with a body length of 4500mm, width of 1834mm, height of 1707mm, and a wheelbase of 2661mm. The overall design of the Vision SUV adopts Geely's family-style design language, featuring the family-style water ripple grille, paired with a blade-style engine hood and a shark-mouth lower grille. The vehicle is equipped with integrated high/low beam headlights, and the eyebrow of the headlight is seamlessly integrated with the grille in a unified design.
6
3
Share

What is the engine model of the 2021 Audi A6L?

The 2021 Audi A6L is equipped with three engine options: the 2.0T low-power version with engine model DKU, the 2.0T high-power version with engine model DKW, and the 3.0T engine with model DLZ. Additional information: 1. Transmission of the Audi A6L: The Audi A6L engine is paired with a 7-speed DSG transmission as standard across all models, while the 45TFSI and 55TFSI variants also feature the quattro-ultra intelligent all-wheel-drive system, achieving a balance between fuel efficiency and off-road capability. 2. Features of the Audi A6L: The new Audi A6L comes standard with tire pressure monitoring, a non-full-size spare tire, LED headlights/taillights, progressive steering system, front seat power adjustment with lumbar support, Audi Virtual Cockpit, cruise control, front/side airbags + curtain airbags, auto start-stop, and Audi Connect technology.
8
1
Share

What Gas Does a Gasoline Engine Inhale?

Gasoline engines inhale a mixture of gasoline and air. Below are the working principle and classification of gasoline engines. Working principle of gasoline engines: By burning the fuel inside the cylinder, kinetic energy is generated, which drives the piston inside the engine cylinder to reciprocate. This, in turn, drives the connecting rod attached to the piston and the crankshaft connected to the connecting rod, performing reciprocating circular motion around the center of the crankshaft, thereby outputting power. Classification of gasoline engines: By fuel type: Diesel engines, gasoline engines, and natural gas engines. By cycle strokes: Four-stroke engines and two-stroke engines. By cooling method: Water-cooled engines and air-cooled engines. By ignition method: Compression ignition engines and spark ignition engines. By mixture formation method: Engines with external mixture formation and internal combustion engines with internal mixture formation. By intake method: Naturally aspirated engines and turbocharged engines. By number of cylinders: Single-cylinder engines and multi-cylinder engines.
14
0
Share

What is the permissible modification range for motorcycles in 2020?

Motorcycles are only allowed to be modified in terms of performance and appearance. Modifications such as widening tires, intake systems, and exhaust systems are not permitted. The illegal modification range for motorcycles is as follows: 1. Vehicle appearance: This mainly refers to adding side cases, tail cases, crash bars, excessively high flag mounts, etc., anything that exceeds the original width and height of the factory model is not allowed. Replacing the original headlights, turn signals (e.g., modifying to angel or demon eyes), using laser cannons (brighter than truck headlights), flashing headlights similar to police cars, changing the position of rearview mirrors, or not installing rearview mirrors. 2. Power system: Replacing the engine (e.g., changing from a single-cylinder to a twin-cylinder, or from 150CC to 250CC), converting carburetors to fuel injection, modifying the exhaust (e.g., straight pipes that are extremely loud), excessively exaggerated exhaust shapes, or overly flashy colors (e.g., bright or pink) are also not allowed.
14
1
Share

How many connection methods are there between the piston pin and the piston and connecting rod?

There are two connection methods between the piston pin and the piston pin bore: 1. Full-floating type: Under the normal operating temperature of the engine, the piston pin can rotate in both the connecting rod small-end bore and the piston pin bore, resulting in minimal and even wear. This method is widely used. To prevent the pin from moving axially and scratching the cylinder wall, circlips are used to secure both ends of the piston pin bore. 2. Semi-floating type: The pin is fixed at one location (either the pin bore or the connecting rod small-end) and floats at the other. Here is some additional information: 1. Introduction: The piston pin is a cylindrical pin installed in the piston skirt. 2. Function: Its middle section passes through the connecting rod small-end bore to connect the piston and the connecting rod. Its role is to transmit the gas force acting on the piston to the connecting rod or to allow the connecting rod small-end to drive the piston in motion. To reduce weight, piston pins are generally made of high-quality alloy steel and designed as hollow structures.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.