···
Log in / Register

Where is the child lock of the Baojun 510 located?

4 Answers
JocelynAnn
07/29/25 11:19am

Baojun 510's child lock is located on the side door lock of the door. Introduction to car child locks: The child lock on motor vehicle doors, also known as child safety lock, is positioned on the rear door locks of the car. When children are riding in the vehicle, it is necessary to activate the child lock on the rear doors. Once engaged, it prevents children from opening the doors during the ride, ensuring the safety of the children inside and avoiding potential accidents while driving. Precautions for car child locks: When you need to use the child safety lock, first open the rear door, gently push the small lever below the door lock towards the direction with the child icon, and then close the door. At this point, the child safety device is in the locked state, the door can only be opened from the outside, and the inner door handle will temporarily lose its function of opening the door.

Was this review help?
8
2
Share
CarmenLee
08/13/25 6:27pm

I've been driving my Baojun 510 for over a year now, and it wasn't until I started taking my little one out that I realized the usefulness of the child lock. The child lock is located on the side of the rear door panel, specifically there's a small sliding button on the door edge. You have to open the rear door to see it, and it's quite noticeable, right next to the door lock mechanism. To use it, first open the door, find the sliding button, and move it up or down to lock it. Once locked, children inside can't open the door, and it can only be opened from the outside by pulling the handle. I think this design is very thoughtful, especially since kids are active and curious. It's dangerous if they accidentally open the door while the car is moving. Before every trip with my child, I make it a habit to check this switch to ensure it's locked. I also want to remind other parents to regularly clean the dust from the door seams to prevent the sliding button from getting stuck. If you're unsure about its location, it's safer to check the vehicle manual or ask at the 4S store. When driving with children, safety comes first, and this small detail shouldn't be overlooked.

Was this review help?
3
3
Share
Expand All
BethanyDella
10/08/25 3:40am

As someone who frequently tinkers with various car models, I'm quite familiar with the child lock on the Baojun 510. Its position is conveniently designed. Located on the inner edge of the rear door, near the door latch, you'll find a small toggle switch. Sliding it activates the child lock function, preventing rear passengers from opening the door from inside and avoiding risks caused by accidental operation by children. I must say, similar to many vehicles in its class, Baojun's child lock is mechanical, offering good durability and simple operation without requiring tools. However, be mindful of cleanliness, as excessive dust can affect its sliding. Safety-wise, child locks are essential, especially when stopping at red lights in urban driving, as children might curiously fiddle with door handles. I recommend new owners first locate and test it—open the rear door and feel along the edge to ensure the sliding knob moves smoothly. During regular maintenance, take a moment to inspect this component to ensure it's free from rust or damage. After all, child safety relies on these small details, so don't wait for an incident to regret it. It's best used in conjunction with seat belts for double protection, making it even more reliable.

Was this review help?
14
1
Share
Expand All
AuroraAnn
11/21/25 4:58am

When I drove the Baojun 510 with my little one, I quickly noticed the child lock switch near the rear door—its position isn’t complicated. Just open the rear door, locate the small sliding button on the door edge, and gently push it by hand to lock it. This way, kids in the back seat can’t open the door. The design is practical and worry-free, preventing the risk of children opening the door while playing in the car. A reminder: always check if the lock is engaged before driving with kids, and make sure you don’t slide the button in the wrong direction, or your effort will be wasted. I’ve also tried carefully inspecting the door gap in sunlight—it makes the tab easier to see. Keeping it clean is important too, as dust buildup can cause it to stick; a quick wipe with a cloth keeps it smooth. If you’re unsure during your first attempt, don’t rush—take your time to figure it out or ask a friend. Make it a habit to check regularly. Safety comes first when driving, so pay extra attention to these small details.

Was this review help?
8
0
Share
Expand All
More Forum Discussions

Where Can I Buy Car Windshield Washer Fluid?

Car windshield washer fluid is available at supermarkets, gas stations, 4S stores, car beauty shops, or auto parts markets. Below is a detailed introduction to car windshield washer fluid: 1. Cleaning performance. Windshield washer fluid is formulated with a variety of surfactants and additives. Surfactants typically have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. 2. Antifreeze performance. It can significantly lower the freezing point of the liquid, thus providing antifreeze effects and quickly dissolving frost. 3. Anti-fog performance. A single-molecule protective layer forms on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear view. 4. Anti-static performance. After cleaning with windshield washer fluid, substances adsorbed on the glass surface can eliminate surface charges, providing anti-static properties. 5. Lubrication performance. With higher viscosity, it can act as a lubricant, reducing friction between the wiper and the glass to prevent scratches.
14
2
Share

Why does the engine idle normally but misfire at high speed?

The reasons for normal engine idle but misfire at high speed are as follows: 1. Excessive spark plug electrode gap; 2. Improper adjustment of distributor contact gap; 3. Weak contact arm spring; 4. Faulty ignition coil or capacitor. The solutions for engine misfire at high speed are as follows: 1. Open the distributor cover and check the distributor gap, which should be 0.35-0.45 mm. Otherwise, adjust the contact gap. 2. Check the spring tension of the contacts. Use a spring scale to lift the contacts to the normal gap, and the reading on the spring scale indicates the spring tension. The normal value should be 500-700 grams. If a spring scale is not available, replace a set of contacts. 3. Remove the spark plug and observe the spark plug gap. The normal value should be 0.6-0.8 mm. If a specialized measuring feeler gauge is not available, a hacksaw blade with a thickness of 0.7 mm can be used for testing. This type of fault can be easily detected using an oscilloscope in a professional repair shop.
20
1
Share

Where should the temporary license plate be affixed on the car?

Temporary license plates should be affixed as follows: 1. One should be placed on the lower left or right corner of the front windshield inside the car; 2. The other should be placed on the lower left corner of the rear windshield inside the car. Below is relevant information about affixing items on motor vehicles: 1. Motor vehicle license plates should be hung at designated positions on the front and rear of the vehicle, maintaining clarity and completeness. Heavy-duty and medium-duty trucks and their trailers, as well as tractors and their trailers, should have enlarged license plate numbers painted on the rear of the body or cargo compartment, with the characters upright and clearly visible. 2. The motor vehicle inspection compliance mark and insurance mark should be affixed to the upper right corner of the front windshield. 3. Any painting, affixing of marks, or body advertisements on motor vehicles must not affect safe driving.
14
2
Share

What to Do About Rattling Noises from the Car Dashboard?

Solutions for rattling noises from the car dashboard are as follows: 1. First, drive slowly and listen carefully to identify the source of the noise. Check for any foreign objects in the dashboard gaps or surrounding areas, such as panels or padding. If the noise persists after cleaning, it is likely due to loose components from frequent use or improper installation during modifications. 2. If screws were not tightened properly during audio system modifications, gaps between panels can be filled with silicone. Also, check if the plastic ducts connected to the air vent adjustment mechanism have cracked due to thermal changes. Additionally, the air ducts connected to the vents on either side of the CD player, located inside the dashboard, can also be sources of noise. 3. Tighten all potentially loose parts thoroughly and clean the dashboard. If the noise comes from the seams around the air vents, use a flathead screwdriver to remove the screws, take out the vents, and secure them with foam double-sided tape. After reattaching, shake the panel to ensure it is properly fixed.
12
1
Share

What happens when a car runs out of oil?

When a car runs out of oil, the lubrication effect becomes very poor, and the lack of lubrication can cause the engine to seize. The less oil there is, the more severe the consequences. Hazards of running out of oil: Running out of oil is highly detrimental to the car. When driving with insufficient oil, gasoline cannot cover the oil pump, preventing it from being effectively cooled. This can shorten the oil pump's lifespan, and in severe cases, may directly damage the oil pump. Function of engine oil: The main function of engine oil is to provide proper lubrication for the engine's pistons, bearings, and other components, preventing high-temperature and high-pressure gases in the combustion chamber from leaking into the crankcase through the gap between the piston and cylinder.
15
3
Share

How Many Kilometers Before a Major Maintenance is Needed?

Generally, vehicles require a major maintenance service after traveling 30,000 kilometers. The major maintenance items include the following: 1. Replace engine oil, oil filter, fuel filter, and air filter; 2. Inspect the braking system for any oil leaks and check if the brake pads are within the specified thickness; 3. Check the wear condition of the engine belt and adjust the belt tension if necessary; 4. Inspect the transmission, drive shaft, and universal joint boot for oil leaks or damage; 5. Check the tread depth, tire pressure, and wear condition of the tires, and perform a wheel alignment if necessary; 6. Inspect the throttle body and idle valve for excessive dirt and clean them if needed; 7. Check the condition of the spark plugs and replace them if necessary, along with a no-disassembly cleaning of the fuel injectors; 8. Inspect the power steering, braking system, and automatic transmission; 9. Test whether the braking force, gear shifting, and steering are functioning normally; 10. Lubricate all relevant parts of the vehicle.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.